lvm2 size limits
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · Shane Wegner
Hello,
I am looking at using lvm2 for a new volume I am creating using 2.4.22+devmapper patch. Under lvm1, I had to specify the pv extent size to get potential support for a vg greater than 2tb. However, I can't seem to find a similar option to pvcreate in lvm2 to set the extent size. What if anything is required during a new lvm setup to break the 2tb barrier. The setup currently is not yet 2tb but I'd like to have that option in the future.
There never has been a 2TB limit on Volume Groups (was in the PT range even with the 2TB block device size maximum in Linux 2.4).
In LVM1 LVs could have as much as ~2^16 Logical Extents maximum. That's why you needed larger extent sizes there to be able to have larger LVs.
FYI: recent LVM1 creates VGs with a default PE size of 32MB which enable
you to have LVs up to 2TB in size.
In LVM2, if you convert existing LVM1 format VGs to LVM2 format (using vgconvert) or create new LVM2 formated VGs, there's no 2TB constraint on LVs any longer but the OS limit for the block device size (which is 2TB).
Use 2.6 in case you want to have >2TB LVs.
Quoted 9 lines
Tia,
Shane_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Signature · 15 lines
Regards,
Heinz -- The LVM Guy --
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf
Germany
[email protected] +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-