2.6.0-test9-mm3 initrd strangeness
This is my first mailing list post so Sorry for any breach of etiquette.
I am experiencing problems with 2.6.0-test9-mm3 and initrd ramdisks
I have support for ramdisks and initrd compiled directly into the kernel and have an initrd image gzipped and placed in /boot called initrd-crypt.gz
When booting off a 2.4.22 kernel the image is loaded and linuxrc is executed perfectly but with a 2.6.0-test9-mm3 kernel i get the following msg at boot time
RAMDISK: Compressed image found at block 0 RAMDISK: incomplete Write (-1 != 32768) 4194304
Any comments, advice, opinions greatly appreciated also if someone could explain what those numbers actually mean i would be very grateful
Many Thanx,
Tim Kelsey
Systems Admin, Midland Internet
Quoted 9 lines · Tim Kelsey
I am experiencing problems with 2.6.0-test9-mm3 and initrd ramdisks
I have support for ramdisks and initrd compiled directly into the kernel and have an initrd image gzipped and placed in /boot called initrd-crypt.gzWhen booting off a 2.4.22 kernel the image is loaded and linuxrc is executed perfectly but with a 2.6.0-test9-mm3 kernel i get the following msg at boot time
RAMDISK: Compressed image found at block 0 RAMDISK: incomplete Write (-1 != 32768) 4194304Any comments, advice, opinions greatly appreciated also if someone could explain what those numbers actually mean i would be very grateful
Seems like your ramdisk is full, the default size is 4096k. Change the CONFIG_BLK_DEV_RAM_SIZE parameter or boot with ramdisk_size=<value>.
Cheers,
Michael.
Signature · 2 lines
Michael Schroeder [email protected] main(_){while(_=~getchar())putchar(~_-1/(~(_|32)/13*2-11)*13);}
Thanx,
My image was too big, i have now changed the initrd size in the kernel config as you said and it works perfectly now.
Thanx very much for your help
Tim Kelsey
Quoted 26 lines · On Thu, 13 Nov 2003 15:47:38 +0100 Michael Schroeder <[email protected]> wrote:
Quoted 9 lines · Tim Kelsey
I am experiencing problems with 2.6.0-test9-mm3 and initrd ramdisks
I have support for ramdisks and initrd compiled directly into the kernel and have an initrd image gzipped and placed in /boot called initrd-crypt.gzWhen booting off a 2.4.22 kernel the image is loaded and linuxrc is executed perfectly but with a 2.6.0-test9-mm3 kernel i get the following msg at boot time
RAMDISK: Compressed image found at block 0 RAMDISK: incomplete Write (-1 != 32768) 4194304Any comments, advice, opinions greatly appreciated also if someone could explain what those numbers actually mean i would be very grateful
Seems like your ramdisk is full, the default size is 4096k. Change the
CONFIG_BLK_DEV_RAM_SIZEparameter or boot with ramdisk_size=<value>.Cheers,
Michael.Signature · 7 lines
Michael Schroeder [email protected] main(_){while(_=~getchar())putchar(~_-1/(~(_|32)/13*2-11)*13);} - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/