Question regarding IDE errors
Hi,
I received the following ide errors in the kernel log and am hoping someone can advice as to whether this indicates a hardware problem or a problem with a driver?
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=155596111, high=9, low=4601167, sector=155596048end_request: I/O error, dev 21:00 (hde), sector 155596048
I just purchased the hard drive a couple weeks back, a Maxtor 250gb attached to a Promise pci ide controler.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 00:0f.1 SvrWks CSB5: chipset revision 146
SvrWks CSB5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2470-0x2477, BIOS settings: hda:DMA,
hdb:pio
ide1: BM-DMA at 0x2478-0x247f, BIOS settings: hdc:pio,hdd:pio
PDC20269: IDE controller at PCI slot 01:09.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x2490-0x2497, BIOS settings: hde:pio,
hdf:pio
ide3: BM-DMA at 0x2498-0x249f, BIOS settings: hdg:pio,hdh:pio
hda: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
hde: Maxtor 4A250J0, ATA DISK drive
hdf: Maxtor 4A250J0, ATA DISK drive
blk: queue c039b298, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c039b3e0, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0x24b0-0x24b7,0x24aa on irq 22
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 490234752 sectors (251000 MB) w/2048KiB Cache, CHS=30515/255/63, UDMA(133)
hdf: attached ide-disk driver.
hdf: host protected area => 1
hdf: 490234752 sectors (251000 MB) w/2048KiB Cache, CHS=30515/255/63, UDMA(133)
Shane