Continuing Tribes 2 problems with NAT
Hi,
I have a tribes 2 server behind an iptables NAT system. I have forwared the ports for Tribes 2 to the server. It connects to the master server and show sup in the servers list. However it shows up with it's internal IP address, not the public IP the network connects to the internet with. This seems to cause problems for those outside the lan trying to connect to the server.
Below I have listed my iptables rules set. Any help is appreciated:
iptables -F
iptables -F INPUT
iptables -F OUTPUT
iptables -F FORWARD
iptables -F -t mangle
iptables -F -t nat
iptables -X
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 37373 -j DNAT --to 192.168.0.1:37373
# Tribes 2 ports forwarded
iptables -t nat -A PREROUTING -i eth0 -p udp --dport 27999 -j DNAT --to 192.168.0.7:27999
iptables -t nat -A PREROUTING -i eth0 -p udp --dport 28000 -j DNAT --to 192.168.0.7:28000
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 28000 -j DNAT --to 192.168.0.7:28000
iptables -A FORWARD -i eth0 -o eth1 -p udp -d 192.168.0.7 --dport 28000 -j ACCEPT
iptables -A FORWARD -i eth0 -o eth1 -p tcp -d 192.168.0.7 --dport 28000 -j ACCEPT
iptables -t nat -A PREROUTING -i eth0 -p udp --dport 28001 -j DNAT --to 192.168.0.7:28001
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 28001 -j DNAT --to 192.168.0.7:28001
iptables -A FORWARD -i eth0 -o eth1 -p udp -d 192.168.0.7 --dport 28001 -j ACCEPT
iptables -A FORWARD -i eth0 -o eth1 -p tcp -d 192.168.0.7 --dport 28001 -j ACCEPT
iptables -t nat -A PREROUTING -i eth0 -p udp --dport 28001:29000 -j DNAT --to 192.168.0.7:28001-
29000
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 15101 -j DNAT --to 192.168.0.7:15101
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 15104 -j DNAT --to 192.168.0.7:15104
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 15024 -j DNAT --to 192.168.0.7:15024
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 15206 -j DNAT --to 192.168.0.7:15206
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 15800 -j DNAT --to 192.168.0.7:15800
echo 1 > /proc/sys/net/ipv4/ip_forward
Mike