i2c bus drivers (4/4)
PATCH 1/1 i2c bus drivers (4/4)
This patch adds support for the KT600 to the i2c-viapro driver. It was confirmed to work by Lou, lm-sensors at fixit dot nospammail dot net in this post:
http://archives.andrew.net.au/lm-sensors/msg05299.html
This isn't a bug fix and can be delayed until after 2.6.0 if you want.
drivers/i2c/busses/i2c-viapro.c renamed from drivers/i2c/busses/i2c-viapro.c.orig +8 -0
@@ -29,6 +29,7 @@8233 8233A (0x3147 and 0x3177) 8235 +8237 Note: we assume there can only be one device, with one SMBus interface. */
@@ -430,6 +431,13 @@ { .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_8235, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data =SMBBA3 + }, + { + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_8237, .subvendor = PCI_ANY_ID, .subdevice =PCI_ANY_ID , .driver_data = SMBBA3
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig.orig +1 -0
@@ -309,6 +310,7 @@ 8233 8233A 8235 + 8237 This driver can also be built as a module. If so, the module will be called i2c-viapro.
Signature · 2 lines
Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
Greg KH
AppliedPATCH 1/1 i2c bus drivers (4/4)
Quoted 6 lines · Jean Delvare
This patch adds support for the KT600 to the i2c-viapro driver. It was confirmed to work by Lou, lm-sensors at fixit dot nospammail dot net in this post:
http://archives.andrew.net.au/lm-sensors/msg05299.htmlThis isn't a bug fix and can be delayed until after 2.6.0 if you want.
Applied, thanks.
greg k-h