OOPS - ide-scsi bug - SCSI BUS number increasing
There is a bug in ide-scsi module (kernel version 2.6.0-test10 with enabled preemptible kernel) - this bug causes SCSI BUS number to be increased by one everytime ide-scsi module is reloaded (modprobe -r ide-scsi then do modprobe ide-scsi) - it is easy to spot that with cdrecord -scanbus. This bug doesn't appear to exist in 2.4 kernel series, I've not tested this with 2.5 series though, this is not cdrtools fault since I tried both versions (2.00 and 2.00.3) with the same result.When ide-scsi is compiled into the kernel, obviously the SCSI BUS number doesn't increase since there is no possibility to reload it during the same kernel session.
/proc/scsi/scsi says:
Attached devices:
Host: scsi13 Channel: 00 Id: 00 Lun: 00
Vendor: LITE-ON Model: LTR-48246S Rev: SS0D
Type: CD-ROM ANSI SCSI revision: 02
And here is the reproduction of bug -
1) Before reloading ide-scsi, output of cdrecord -scanbus:
Linux sg driver version: 3.5.29
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling Using libscg version 'schily-0.7'
scsibus13:
13,0,0 1300) 'LITE-ON ' 'LTR-48246S ' 'SS0D' Removable CD-ROM 13,1,0 1301) * 13,2,0 1302) * 13,3,0 1303) * 13,4,0 1304) * 13,5,0 1305) * 13,6,0 1306) * 13,7,0 1307) *
2) After preloading (modprobe -r ide-scsi && modprobe ide-scsi)
Linux sg driver version: 3.5.29
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling Using libscg version 'schily-0.7'
scsibus14:
14,0,0 1400) 'LITE-ON ' 'LTR-48246S ' 'SS0D' Removable CD-ROM 14,1,0 1401) * 14,2,0 1402) * 14,3,0 1403) * 14,4,0 1404) * 14,5,0 1405) * 14,6,0 1406) * 14,7,0 1407) *
Output of uname -r:
2.6.0-test10-athlon
I was trying to fix this bug myself in ide-scsi.c code, but I unfortunately I don't know it's structure...
from what I know, ide-scsi is broken in 2.6 and deprecated in favor of atapi burning. You can use cdrecord dev=/dev/hdx. Patches would be much appreciated though.
------
Michael J. Cohen
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of [email protected]
Sent: Saturday, December 06, 2003 12:16 PM
To: [email protected]
Subject: OOPS - ide-scsi bug - SCSI BUS number increasing
There is a bug in ide-scsi module (kernel version 2.6.0-test10 with enabled preemptible kernel) - this bug causes SCSI BUS number to be increased by one
everytime ide-scsi module is reloaded (modprobe -r ide-scsi then do modprobe ide-scsi) - it is easy to spot that with cdrecord -scanbus. This bug doesn't appear to exist in 2.4 kernel series, I've not tested this with 2.5 series though, this is not cdrtools fault since I tried both versions
(2.00 and 2.00.3) with the same result.When ide-scsi is compiled into the kernel, obviously the SCSI BUS number doesn't increase since there is no possibility to reload it during the same kernel session.
/proc/scsi/scsi says:
Attached devices:
Host: scsi13 Channel: 00 Id: 00 Lun: 00
Vendor: LITE-ON Model: LTR-48246S Rev: SS0D
Type: CD-ROM ANSI SCSI revision: 02
And here is the reproduction of bug -
1) Before reloading ide-scsi, output of cdrecord -scanbus:
Linux sg driver version: 3.5.29
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling Using libscg version 'schily-0.7'
scsibus13:
13,0,0 1300) 'LITE-ON ' 'LTR-48246S ' 'SS0D' Removable CD-ROM 13,1,0 1301) * 13,2,0 1302) * 13,3,0 1303) * 13,4,0 1304) * 13,5,0 1305) * 13,6,0 1306) * 13,7,0 1307) *
2) After preloading (modprobe -r ide-scsi && modprobe ide-scsi)
Linux sg driver version: 3.5.29
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling Using libscg version 'schily-0.7'
scsibus14:
14,0,0 1400) 'LITE-ON ' 'LTR-48246S ' 'SS0D' Removable CD-ROM 14,1,0 1401) * 14,2,0 1402) * 14,3,0 1403) * 14,4,0 1404) * 14,5,0 1405) * 14,6,0 1406) * 14,7,0 1407) *
Output of uname -r:
2.6.0-test10-athlon
I was trying to fix this bug myself in ide-scsi.c code, but I unfortunately I
don't know it's structure...
Quoted 11 lines · Michael J. Cohen
There is a bug in ide-scsi module (kernel version 2.6.0-test10 with enabled preemptible kernel) - this bug causes SCSI BUS number to be increased by one
everytime ide-scsi module is reloaded (modprobe -r ide-scsi then do modprobe ide-scsi) - it is easy to spot that with cdrecord -scanbus. This bug doesn't appear to exist in 2.4 kernel series, I've not tested this with 2.5 series though, this is not cdrtools fault since I tried both versions
(2.00 and 2.00.3) with the same result.When ide-scsi is compiled into the kernel, obviously the SCSI BUS number doesn't increase since there is no possibility to reload it during the same kernel session.
This happens with all SCSI drivers, check;
scsi_host_alloc() {
...
shost->host_no = scsi_host_next_hn++; /* XXX(hch): still racy */
...
}So it's fine.