Skip to contentSkip to conversation

Problem Report: ns83820 / 802.1Q vlan / 2.4.23

DISCUSSION Stephan von Krawczynski 1 participant 2 messages Dec 8, 2003 Networking

lore
Share & tools
lore
#0 lore raw

Hello,

I just experienced a problem with ns83820 and 802.1Q vlan support. It seems that incoming packets get dropped if the device is connected to a tagged switch port. Reducing the mtu solves the problem but is of course not nice. I remember some old docs where it says there can be problems because of the oversized tagged packets. Intel e100 seems to work flawlessly in same setup.

Regards,
Stephan

#1 lore raw
Quoted 7 lines · On Mon, 8 Dec 2003 14:56:22 +0100 Stephan von Krawczynski <[email protected]>…

Hello,

I just experienced a problem with ns83820 and 802.1Q vlan support. It seems that incoming packets get dropped if the device is connected to a tagged switch port. Reducing the mtu solves the problem but is of course not nice. I remember some old docs where it says there can be problems because of the oversized tagged packets. Intel e100 seems to work flawlessly in same setup.

Regarding this problem I just did this incredibly complex patch, which seems to work. Maintainer please beat me...

;-)
Regards,
Stephan

net/ns83820.c 2003-12-08 17:33:31.000000000 +0100 renamed from net/ns83820.c-orig 2003-12-08 17:33:14.000000000 +0100 +1 -1
@@ -141,7 +141,7 @@
 #define NR_TX_DESC     128
 
 /* not tunable */
-#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14)    /* rx/tx mac addr + type */
+#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14 + 4)        /* rx/tx mac addr + type + vlan*/
 
 #define MIN_TX_DESC_FREE       8