DNAT onto the same external network
Hello,
I'm trying to redirect all SMTP-connections to one external host to another external host. Both these exists on the same subnet which, if I've understood it correctly, equals to trouble. ;)
So, reading through the NAT HOWTO and lots of questions to this list I've tried most of things but unfortunate it doesn't work.
For testing purposes I use port 2525 on first host before taking the mail-service on that host down permanent.
This is todays situation; trying to redirect ...13:2525 to ...16:25.
[ net ]
´ `
111.222.333.13 111.222.333.16
These are external IP's, there's no internal network.I'm currently using Debian Woody (iptables v1.2.6a) with a freshly compiled kernel 2.4.18 with NAT support.
The rules I think is the onces that *should* work is these:
## Change destination addresses of mail traffic to 111.222.333.16, port 25.
iptables -t nat -A PREROUTING -p tcp --dport 2525 -i eth0 \ -j DNAT --to 111.222.333.16:25
## Destination NAT Onto the Same Network
iptables -t nat -A POSTROUTING -d 111.222.333.13 -s 0.0.0.0/0 \
-p tcp --dport 2525 -j SNAT --to 111.222.333.16These are also the only rules that currently exists on the machine. If I then use these and connect from the subnet 111.222.333.0/24 the SNAT packet counter increases, connecting from another subnet increases the DNAT counter.
Tracing these with tcpdump shows this output:
[ 111.222.333.13 / mail1.myhostname.com ]
03:04:43.451436 externalhost.com.35736 > mail1.myhostname.com.333.222.111.in-addr.arpa.2525: S 684181285:684181285(0) win 5840 <mss 1460,sackOK,timestamp 961920999 0,nop,wscale 0> (DF) [tos 0x60] 03:04:43.451538 externalhost.com.35736 > mail2.myhostname.com.smtp: S 684181285:684181285(0) win 5840 <mss 1460,sackOK,timestamp 961920999 0,nop,wscale 0> (DF) [tos 0x60] [...]
[ 111.222.333.16 / mail2.myhostname.com ]
04:44:46.087439 externalhost.com.35735 > mail2.myhostname.com.smtp: S 654494669:654494669(0) win 5840 <mss 1460,sackOK,timestamp 961920329 0,nop,wscale 0> (DF) [tos 0x60] 04:44:46.087480 mail2.myhostname.com.smtp > externalhost.com.35735: S 2345893112:2345893112(0) ack 654494670 win 5792 <mss 1460,sackOK,timestamp 124930458 961920329,nop,wscale 0> (DF) 04:44:46.087705 externalhost.com.35735 > mail2.myhostname.com.smtp: R 654494670:654494670(0) win 32120 [tos 0x60]
04:44:46.087923 111.222.333.1 > mail2.myhostname.com: icmp: redirect myexternalhost.com to host 111.222.333.18
[...]
I don't know why it says icmp: redirect to a host with .18, that's not a host I know of. Anyway, this is what my iptables -L -v -n -t nat says:
Chain PREROUTING (policy ACCEPT 17228 packets, 677K bytes)
pkts bytes target prot opt in out source destination
3 180 DNAT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2525 to:111.222.333.16:25Chain POSTROUTING (policy ACCEPT 2106 packets, 132K bytes)
pkts bytes target prot opt in out source destination
1 60 SNAT tcp -- * * 0.0.0.0/0 111.222.333.13 tcp dpt:2525 to:111.222.333.16Chain OUTPUT (policy ACCEPT 2081 packets, 131K bytes)
pkts bytes target prot opt in out source destination
Any ideas, what so ever, will be glady recieved!
Thanks in advance,
Örjan
Hello again,
In the case that this mail reaches the mailing list I would just like to answer my own question. I had misunderstood the SNAT command, and to get this correct you/me need to change the IP's in the SNAT command. (This since this rule is for the reply FROM the source host which has been routed to with the DNAT command)
Quoted 4 lines
## Destination NAT Onto the Same Network
iptables -t nat -A POSTROUTING -d 111.222.333.13 -s 0.0.0.0/0 \ -p tcp --dport 2525 -j SNAT --to 111.222.333.16
In this case this would've been -d 111.222.333.16 and --to ...13.
Cheers,
Örjan
Quoted 66 lines · Örjan Persson
Hello,
I'm trying to redirect all SMTP-connections to one external host to another external host. Both these exists on the same subnet which, if I've understood it correctly, equals to trouble. ;)
So, reading through the NAT HOWTO and lots of questions to this list I've tried most of things but unfortunate it doesn't work.
For testing purposes I use port 2525 on first host before taking the mail-service on that host down permanent.
This is todays situation; trying to redirect ...13:2525 to ...16:25.
[ net ] ´ ` 111.222.333.13 111.222.333.16 These are external IP's, there's no internal network.I'm currently using Debian Woody (iptables v1.2.6a) with a freshly compiled kernel 2.4.18 with NAT support.
The rules I think is the onces that *should* work is these:
## Change destination addresses of mail traffic to 111.222.333.16, port 25.
iptables -t nat -A PREROUTING -p tcp --dport 2525 -i eth0 \ -j DNAT --to 111.222.333.16:25## Destination NAT Onto the Same Network
iptables -t nat -A POSTROUTING -d 111.222.333.13 -s 0.0.0.0/0 \ -p tcp --dport 2525 -j SNAT --to 111.222.333.16These are also the only rules that currently exists on the machine. If I then use these and connect from the subnet 111.222.333.0/24 the SNAT packet counter increases, connecting from another subnet increases the DNAT counter.
Tracing these with tcpdump shows this output:
[ 111.222.333.13 / mail1.myhostname.com ]
03:04:43.451436 externalhost.com.35736 > mail1.myhostname.com.333.222.111.in-addr.arpa.2525: S 684181285:684181285(0) win 5840 <mss 1460,sackOK,timestamp 961920999 0,nop,wscale 0> (DF) [tos0x60] 03:04:43.451538 externalhost.com.35736 > mail2.myhostname.com.smtp: S 684181285:684181285(0) win 5840 <mss 1460,sackOK,timestamp 961920999 0,nop,wscale 0> (DF) [tos0x60] [...][ 111.222.333.16 / mail2.myhostname.com ]
04:44:46.087439 externalhost.com.35735 > mail2.myhostname.com.smtp: S 654494669:654494669(0) win 5840 <mss 1460,sackOK,timestamp 961920329 0,nop,wscale 0> (DF) [tos0x60] 04:44:46.087480 mail2.myhostname.com.smtp > externalhost.com.35735: S 2345893112:2345893112(0) ack 654494670 win 5792 <mss 1460,sackOK,timestamp 124930458 961920329,nop,wscale 0> (DF) 04:44:46.087705 externalhost.com.35735 > mail2.myhostname.com.smtp: R 654494670:654494670(0) win 32120 [tos0x60]
04:44:46.087923 111.222.333.1 > mail2.myhostname.com: icmp: redirect myexternalhost.com to host 111.222.333.18
[...]I don't know why it says icmp: redirect to a host with .18, that's not a host I know of. Anyway, this is what my iptables -L -v -n -t nat says:
Chain PREROUTING (policy ACCEPT 17228 packets, 677K bytes)pkts bytes target prot opt in out source destination 3 180 DNAT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2525 to:111.222.333.16:25Chain POSTROUTING (policy ACCEPT 2106 packets, 132K bytes)
pkts bytes target prot opt in out source destination 1 60 SNAT tcp -- * * 0.0.0.0/0 111.222.333.13 tcp dpt:2525 to:111.222.333.16Chain OUTPUT (policy ACCEPT 2081 packets, 131K bytes)
pkts bytes target prot opt in out source destinationAny ideas, what so ever, will be glady recieved!
Thanks in advance,
Örjan