use struct uart_port for early_serial_setup()

PATCH New Dimitri Torfs 1 participant 1 message Dec 23, 2003 MIPS

lore

Share & tools

lore

Dimitri Torfs

author

2003-12-23 09:03 UTC #0 lore raw

PATCH 1/1 use struct uart_port for early_serial_setup()

Hi,

I think early_serial_setup() should be called with struct uart_port* instead of struct serial_struct*. Patch for the Vr41xx series.

Dimitri

Signature · 4 lines

Dimitri Torfs             |  NSCE 
[email protected] |  Sint Stevens Woluwestraat 55
tel: +32 2 2908451        |  1130 Brussel
fax: +32 2 7262686        |  Belgium

Index: arch/mips/vr41xx/common/serial.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/vr41xx/common/serial.c,v retrieving revision 1.4

mips/vr41xx/common/serial.c +27 ~~-21~~

diff -u -r1.4 serial.c
@@ -41,7 +41,9 @@
  */
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/tty.h>
 #include <linux/serial.h>
+#include <linux/serial_core.h>
 
 #include <asm/addrspace.h>
 #include <asm/cpu.h>

@@ -116,59 +118,62 @@
 
 void __init vr41xx_siu_init(int interface, int module)
 {
-	struct serial_struct s;
+#ifdef CONFIG_SERIAL_8250
+	struct uart_port p;
 
 	vr41xx_siu_ifselect(interface, module);
 
-	memset(&s, 0, sizeof(s));
+	memset(&p, 0, sizeof(p));
 
-	s.line = vr41xx_serial_ports;
-	s.baud_base = SIU_BASE_BAUD;
-	s.irq = SIU_IRQ;
-	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	p.line = vr41xx_serial_ports;
+	p.uartclk = SIU_BASE_BAUD * 16;
+	p.irq = SIU_IRQ;
+	p.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	switch (current_cpu_data.cputype) {
 	case CPU_VR4111:
 	case CPU_VR4121:
-		s.iomem_base = (unsigned char *)VR4111_SIURB;
+		p.membase = (unsigned char *)VR4111_SIURB;
 		break;
 	case CPU_VR4122:
 	case CPU_VR4131:
 	case CPU_VR4133:
-		s.iomem_base = (unsigned char *)VR4122_SIURB;
+		p.membase = (unsigned char *)VR4122_SIURB;
 		break;
 	default:
 		panic("Unexpected CPU of NEC VR4100 series");
 		break;
 	}
-	s.iomem_reg_shift = 0;
-	s.io_type = SERIAL_IO_MEM;
-	if (early_serial_setup(&s) != 0)
+	p.regshift = 0;
+	p.iotype = UPIO_MEM;
+	if (early_serial_setup(&p) != 0)
 		printk(KERN_ERR "SIU setup failed!\n");
 
 	vr41xx_clock_supply(SIU_CLOCK);
 
 	vr41xx_serial_ports++;
+#endif
 }
 
 void __init vr41xx_dsiu_init(void)
 {
-	struct serial_struct s;
+#ifdef CONFIG_SERIAL_8250
+	struct uart_port p;
 
 	if (current_cpu_data.cputype != CPU_VR4122 &&
 	    current_cpu_data.cputype != CPU_VR4131 &&
 	    current_cpu_data.cputype != CPU_VR4133)
 		return;
 
-	memset(&s, 0, sizeof(s));
+	memset(&p, 0, sizeof(p));
 
-	s.line = vr41xx_serial_ports;
-	s.baud_base = DSIU_BASE_BAUD;
-	s.irq = DSIU_IRQ;
-	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-	s.iomem_base = (unsigned char *)DSIURB;
-	s.iomem_reg_shift = 0;
-	s.io_type = SERIAL_IO_MEM;
-	if (early_serial_setup(&s) != 0)
+	p.line = vr41xx_serial_ports;
+	p.uartclk = DSIU_BASE_BAUD * 16;
+	p.irq = DSIU_IRQ;
+	p.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	p.membase = (unsigned char *)DSIURB;
+	p.regshift = 0;
+	p.iotype = UPIO_MEM;
+	if (early_serial_setup(&p) != 0)
 		printk(KERN_ERR "DSIU setup failed!\n");
 
 	vr41xx_clock_supply(DSIU_CLOCK);

@@ -176,4 +181,5 @@
 	writew(INTDSIU, MDSIUINTREG);
 
 	vr41xx_serial_ports++;
+#endif
 }