Skip to contentSkip to conversation

kernel can't boot

DISCUSSION sun-zj 2 participants 2 messages Dec 26, 2003

lore
Share & tools
lore

sun-zj

author
#0 lore raw

Hi, all:

I am using the ELDL-2.1 from denx(Thanks their hard works) and the recent kernel advised by Denk(thanks a lots). I compile it and download it by tftp with FEC ethernet.
I use the FADS board and U-boot-1.0.0. The eldk enclosed kernel-2.4.4 works fine. But kernel-2.4.23 can go to the stage

of Uncompressed kernel image OK. and then system Hangs there without any messages?

Who can tell me what happens ?

Thanks your advice.

Best Regards.

Sun

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 8 lines · In message <[email protected]> you wrote:

I am using the ELDL-2.1 from denx(Thanks their hard works) and the recent kernel advised by Denk(thanks a lots). I compile it and download it by tftp with FEC ethernet.
I use the FADS board and U-boot-1.0.0. The eldk enclosed kernel-2.4.4 works fine. But kernel-2.4.23 can go to the stage of Uncompressed kernel image OK. and then system Hangs there without any messages?

Probably the kernel received invalid parameters (clock information).

Quoted 1 line

Who can tell me what happens ?

You did not read the FAQ. See
http://www.denx.de/twiki/bin/view/DULG/LinuxHangsAfterUncompressingKernel

Best regards,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] Ernest asks Frank how long he has been working for the company.
"Ever since they threatened to fire me."

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/