2.6.0 kernel panic
Subsystems (2)
P4 2GHz
ASUS P4S533 mainboard
1G PC2700 RAM
GF2 GTS video using nv driver
2.6.0 compiled with gcc 3.3.2
At boot kernel gets:
INIT: cannot execute "/etc/rc.d/rc.sysinit"
then panic.
Same configuration for 2.6.0-test11 and earlier works fine.
Signature · 1 line
Murray J. Root
Quoted 11 lines · Murray J. Root
P4 2GHz
ASUS P4S533 mainboard
1G PC2700 RAM
GF2 GTS video using nv driver
2.6.0 compiled with gcc 3.3.2At boot kernel gets:
INIT: cannot execute "/etc/rc.d/rc.sysinit"
then panic.Same configuration for 2.6.0-test11 and earlier works fine.
Update your gcc-rpm and recompile
# Han
Quoted 6 lines · Murray J. Root
P4 2GHz
ASUS P4S533 mainboard
1G PC2700 RAM
GF2 GTS video using nv driver
2.6.0 compiled with gcc 3.3.2
Quoted 6 lines
At boot kernel gets:
INIT: cannot execute "/etc/rc.d/rc.sysinit"
then panic.Same configuration for 2.6.0-test11 and earlier works fine.
To answer myself, I did a diff between 2.6.0-test11 and 2.6.0. Found this:
mm/mmap.c +8 -2
@@ -19,6 +19,7 @@#include <linux/hugetlb.h> #include <linux/profile.h> #include <linux/module.h> +#include <linux/mount.h> #include <asm/uaccess.h> #include <asm/pgalloc.h>
@@ -474,8 +475,13 @@struct rb_node ** rb_link, * rb_parent;unsigned long charged =0 ; -if (file && (!file->f_op || !file->f_op->mmap)) -return -ENODEV ; +if (file) { +if (!file->f_op || !file->f_op->mmap) +return -ENODEV ; + +if ((prot &PROT_EXEC ) && (file->f_vfsmnt->mnt_flags &MNT_NOEXEC )) +return -EPERM ; + }if (!len)return addr;
I undid the changes and it boots fine.
Don't know if it makes a difference but I don't use an initrd.
Signature · 1 line
Murray J. Root
Quoted 7 lines · Murray J. Root
Quoted 6 lines · Murray J. Root
P4 2GHz
ASUS P4S533 mainboard
1G PC2700 RAM
GF2 GTS video using nv driver
2.6.0 compiled with gcc 3.3.2
Quoted 8 lines
Quoted 6 lines
At boot kernel gets:
INIT: cannot execute "/etc/rc.d/rc.sysinit"
then panic.Same configuration for 2.6.0-test11 and earlier works fine.
To answer myself, I did a diff between 2.6.0-test11 and 2.6.0. Found this:
Sounds like one of the partitions that has the executable script loader is mounted with "noexec".
On most systems, /etc/rc.d/rc.sysinit is a bash script, and explicitly points to /bin/bash. Check "ldd /bin/bash", and verify that all the libraries (and /bin itself, of course) are mounted on executable filesystems.
That would be a bug that 2.6.0 uncovers.
Linus
Quoted 22 lines · Linus Torvalds
Quoted 7 lines · Murray J. Root
Quoted 6 lines · Murray J. Root
P4 2GHz
ASUS P4S533 mainboard
1G PC2700 RAM
GF2 GTS video using nv driver
2.6.0 compiled with gcc 3.3.2Quoted 8 lines
Quoted 6 lines
At boot kernel gets:
INIT: cannot execute "/etc/rc.d/rc.sysinit"
then panic.Same configuration for 2.6.0-test11 and earlier works fine.
To answer myself, I did a diff between 2.6.0-test11 and 2.6.0. Found this:
Sounds like one of the partitions that has the executable script loader is mounted with "noexec".
Quoted 7 lines
On most systems,
/etc/rc.d/rc.sysinitis a bash script, and explicitly points to/bin/bash. Check "ldd/bin/bash", and verify that all the libraries (and /bin itself, of course) are mounted on executable filesystems.That would be a bug that 2.6.0 uncovers.
Thought of that. What does the initial mounting of / ? If it's using /etc/fstab then that isn't the problem - I have no partitions mounting noexec. /bin and /lib are on the / partition. If it's a script then it's from Mandrake and I'll have to hunt it down and send them a patch.
Not using devfs or udev. No initrd. All components built-in although module support is enabled.
/etc/fstab is included below.
Signature · 15 lines
Murray J. Root [root@Master source]# cat /etc/fstab /dev/hda1 /mnt/windows vfat iocharset=iso8859-1,codepage=850,umask=0 0 0 /dev/hda5 / reiserfs notail 1 1 /dev/hda6 /usr/local reiserfs notail 1 2 /dev/hda7 /mirror reiserfs notail 1 2 /dev/hda8 /home reiserfs notail 1 2 /dev/hda9 swap swap defaults 0 0 /dev/hda10 /common reiserfs notail 1 2 /dev/hdc /mnt/cdrom iso9660 noauto,nosuid,ro,umask=0,user,nodev 0 0 /dev/hdd /mnt/cdrom2 iso9660 codepage=850,iocharset=iso8859-1,noauto,nosuid,ro,umask=0,user,nodev 0 0 /dev/sda1 /mnt/disk vfat noauto,rw,user,umask=0 0 0 none /dev/pts devpts mode=0620 0 0 none /proc proc defaults 0 0
Quoted 22 lines · Linus Torvalds
Quoted 7 lines · Murray J. Root
Quoted 6 lines · Murray J. Root
P4 2GHz
ASUS P4S533 mainboard
1G PC2700 RAM
GF2 GTS video using nv driver
2.6.0 compiled with gcc 3.3.2Quoted 8 lines
Quoted 6 lines
At boot kernel gets:
INIT: cannot execute "/etc/rc.d/rc.sysinit"
then panic.Same configuration for 2.6.0-test11 and earlier works fine.
To answer myself, I did a diff between 2.6.0-test11 and 2.6.0. Found this:
Sounds like one of the partitions that has the executable script loader is mounted with "noexec".
Quoted 6 lines
On most systems,
/etc/rc.d/rc.sysinitis a bash script, and explicitly points to/bin/bash. Check "ldd/bin/bash", and verify that all the libraries (and /bin itself, of course) are mounted on executable filesystems.That would be a bug that 2.6.0 uncovers.
I've noticed that 2.4.23 lacks this additional check, and included a patch against it.
Marcelo, does this trivial stuff look good enough to be applied?
-Isaac
Quoted 7 lines
Linus
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 3 lines
Regards, Isaac () ascii ribbon campaign - against html e-mail /\ - against microsoft attachments
mmap.c.execproto renamed from mmap.c +8 -2
@@ -17,6 +17,7 @@ #include <asm/uaccess.h> #include <asm/pgalloc.h> +#include <linux/mount.h> /* * WARNING: the debugging will use recursive algorithms so never enable this
@@ -400,8 +401,13 @@ unsigned long do_mmap_pgoff(struct file int error; rb_node_t ** rb_link, * rb_parent; - if (file && (!file->f_op || !file->f_op->mmap)) - return -ENODEV; + if (file) { + if (!file->f_op || !file->f_op->mmap) + return -ENODEV; + + if ((prot & PROT_EXEC) && (file->f_vfsmnt->mnt_flags & MNT_NOEXEC)) + return -EPERM; + } if (!len) return addr;