Skip to contentSkip to conversation

segv at strcmp

DISCUSSION umut aymakoglu 4 participants 10 messages Jan 5, 2004 – Jan 6, 2004

lore
Share & tools
lore
#0 lore raw

Hi -
The gcc version is gcc-3.2-29 and the flags we pass
to gcc are : -O -ansi -fwritable-strings -fsigned-char -D_GNU_SOURCE -D_REENTRANT

thanks,
Umut

Quoted 31 lines · Tony
Quoted 1 line

We have hit a problem with strcmp() on UnitedLinux

1.0

Quoted 2 lines

with kernel: 2.4.19 and glibc: 2.2.5.
I am wondering if anybody has seen something like

it

Quoted 1 line

or knows if already there is a patch. I do not

have a

Quoted 4 lines

small repro but i will try to explain:

The segv happens at memcmp() at a line like:
'strcmp(x, "this is 24 chars long")' where x is a

char

Quoted 2 lines

pointer with a length of 7 and the constant has a length of 24. x is located at the first 8 bytes of

the

Quoted 1 line

last 16 bytes at the end of a non-contiguous

shared

Quoted 1 line

memory segment. memcmp() segvs when it tries to

load 8

Quoted 1 line

bytes from the "r19" register which initially has

the

Quoted 1 line

address of x and points to the end of the segment

when

Quoted 1 line

the segv happens.

Sounds like your compiler converted the strcmp(str, const_str)
into memcmp(str, const_str, strlen(const_str)) ... and then
the memcmp fell off the end of the page.

Quoted 5 lines

What version of gcc are you using, and what
arguments are you
passing to gcc?

-Tony

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

#1 lore raw
Quoted 4 lines

Hi -
The gcc version is gcc-3.2-29 and the flags we pass
to gcc are : -O -ansi -fwritable-strings -fsigned-char -D_GNU_SOURCE -D_REENTRANT

I have gcc 3.2.3 ... but it appears to not do anything strange to my test program with those options.

main()

{
        char *x = "7chars!";

        strcmp(x, "This is 24 chars long!!!");
}

with those options. Do you have any include files that might be redefining strcmp as memcmp?

-Tony

#2 lore raw
In reply to umut aymakoglu

Probably the location of "x" is not at the end of the shared memory segment. In /usr/include/bits/string2.h strcmp is defined as memcmp which must be getting picked up.

thanks,
Umut

Quoted 18 lines · Tony
Quoted 2 lines

Hi -
The gcc version is gcc-3.2-29 and the flags we

pass

Quoted 1 line

to gcc are : -O -ansi -fwritable-strings

-fsigned-char

Quoted 1 line

-D_GNU_SOURCE -D_REENTRANT

I have gcc 3.2.3 ... but it appears to not do
anything
strange to my test program with those options.

main()

{
        char *x = "7chars!";

        strcmp(x, "This is 24 chars long!!!");
}
Quoted 5 lines

with those options. Do you have any include files that
might be redefining strcmp as memcmp?

-Tony

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

#3 lore raw
In reply to umut aymakoglu

The <bits/string2.h> on my machine (came from the glibc-devel-2.3.2-63 package in RedHat EL3). Looks like it will only convert a strcmp to a memcmp if *both* the arguments are constant:

# define strcmp(s1, s2) \
  __extension__                                                               \
  ({ size_t __s1_len, __s2_len;                                               \
     (__builtin_constant_p (s1) && __builtin_constant_p (s2)                  \
      && (__s1_len = strlen (s1), __s2_len = strlen (s2),                     \
          (!__string2_1bptr_p (s1) || __s1_len >= 4)                          \
          && (!__string2_1bptr_p (s2) || __s2_len >= 4))                      \
      ? memcmp ((__const char *) (s1), (__const char *) (s2),                 \
                (__s1_len < __s2_len ? __s1_len : __s2_len) + 1)              \
      : (__builtin_constant_p (s1) && __string2_1bptr_p (s1)                  \
         && (__s1_len = strlen (s1), __s1_len < 4)                            \
         ? (__builtin_constant_p (s2) && __string2_1bptr_p (s2)               \
            ? __strcmp_cc (s1, s2, __s1_len)                                  \
            : __strcmp_cg (s1, s2, __s1_len))                                 \
         : (__builtin_constant_p (s2) && __string2_1bptr_p (s2)               \
            && (__s2_len = strlen (s2), __s2_len < 4)                         \
            ? (__builtin_constant_p (s1) && __string2_1bptr_p (s1)            \
               ? __strcmp_cc (s1, s2, __s2_len)                               \
               : __strcmp_gc (s1, s2, __s2_len))                              \
            : strcmp (s1, s2)))); })

(I say "looks like" because I'm getting dizzy trying to match parentheses in that expression). Clearly your test case managed to convert to memcmp when the first argument was not a constant string ... which caused you grief.

-Tony

#4 lore raw
In reply to umut aymakoglu
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line · Tony

Hi - The gcc version is gcc-3.2-29 and the flags we pass to gcc are : -O -ansi -fwritable-strings -fsigned-char -D_GNU_SOURCE -D_REENTRANT

Tony> I have gcc 3.2.3 ... but it appears to not do anything strange Tony> to my test program with those options.

  Tony> main() { char *x = "7chars!";

Tony> strcmp(x, "This is 24 chars long!!!"); }

Tony> with those options. Do you have any include files that might Tony> be redefining strcmp as memcmp?

In earlier versions of libc, there were some mem/str-related routines which were too aggressive in prefetching. Perhaps Jes remembers the details, but I'd definitely recommend to make sure you're running the latest libc for your distro.

	--david
#5 lore raw
In reply to umut aymakoglu

Ok - I have a small repro that segvs.

#include <stdio.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <string.h>
#include <stdlib.h>

#define SHMBASE 0x200000000
#define AL (1024*1024)
#define MAXSEGMENTS 1

#ifndef SHM_R
#define SHM_R 0400
#endif
#ifndef SHM_W
#define SHM_W 0660
#endif

#define SHM_MODE ( SHM_R | SHM_W | IPC_CREAT )
#define KEY2SUCKS 0x52435200

unsigned long sizes[MAXSEGMENTS] ={720896};

main()
{

    int  shmid[MAXSEGMENTS];
    char *shmptr[MAXSEGMENTS];
    long addr,mykey,loop,addr_save,attempts=0;
    int i;
    char *name;


    addr = SHMBASE;
    mykey  = KEY2SUCKS;
    attempts = 0;

for( loop=0;loop<MAXSEGMENTS;loop++ )
{

shmid[loop]=shmget((key_t)mykey,sizes[loop],SHM_MODE);
shmptr[loop]=(char
*)shmat(shmid[loop],(void*)addr,0);

/* ALign the size on SHMLBA(16K) */
sizes[loop]=(sizes[loop] + SHMLBA - 1) & ~(SHMLBA -1); addr=shmptr[attempts]+(unsigned long)sizes[loop]; addr_save = addr;
printf("addr1 = %p\n",addr);

/* aLign the Address on 1MB */
addr=(char *)(((unsigned long)addr + AL-1) & ~(AL-1));

printf("addr2 = %p\n",addr);
attempts++;
mykey++;
}

name = ((unsigned long)addr_save - 16);
printf("%p\n",name);
strcpy(name, "sqlexec");
ret = strcmp(name,"aaaaaaaaaaaaaaaaaaaaaaaa");

for( loop=0;loop<attempts;loop++ )

       shmctl( shmid[loop],IPC_RMID,0 );

printf( "\n\tRemoved All Segments ... \n\n");
exit( 0 );
}

%gcc -O -o x x.c
%./x

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

#6 lore raw
In reply to umut aymakoglu

Didn't compile ... "ret" undefined ... so I fixed that, but then it SEGV'd on the "strcpy" ... it didn't make it to the strcmp().

-Tony

Quoted 93 lines

-----Original Message-----
From: umut aymakoglu [mailto:[email protected]]
Sent: Monday, January 05, 2004 4:04 PM
To: Luck, Tony; [email protected]
Cc: [email protected]
Subject: RE: segv at strcmp

Ok - I have a small repro that segvs.

#include <stdio.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <string.h>
#include <stdlib.h>

#define SHMBASE 0x200000000
#define AL (1024*1024)
#define MAXSEGMENTS 1

#ifndef SHM_R
#define SHM_R 0400
#endif
#ifndef SHM_W
#define SHM_W 0660
#endif

#define SHM_MODE ( SHM_R | SHM_W | IPC_CREAT )
#define KEY2SUCKS 0x52435200

unsigned long sizes[MAXSEGMENTS] ={720896};

main()
{

    int  shmid[MAXSEGMENTS];
    char *shmptr[MAXSEGMENTS];
    long addr,mykey,loop,addr_save,attempts=0;
    int i;
    char *name;


    addr = SHMBASE;
    mykey  = KEY2SUCKS;
    attempts = 0;

for( loop=0;loop<MAXSEGMENTS;loop++ )
{

shmid[loop]=shmget((key_t)mykey,sizes[loop],SHM_MODE);
shmptr[loop]=(char
*)shmat(shmid[loop],(void*)addr,0);

/* ALign the size on SHMLBA(16K) */
sizes[loop]=(sizes[loop] + SHMLBA - 1) & ~(SHMLBA -1); addr=shmptr[attempts]+(unsigned long)sizes[loop];

addr_save = addr;
   printf("addr1 = %p\n",addr);

/* aLign the Address on 1MB */

addr=(char *)(((unsigned long)addr + AL-1) & ~(AL-1));
   
   printf("addr2 = %p\n",addr);
   attempts++;
   mykey++;
}

name = ((unsigned long)addr_save - 16);
printf("%p\n",name);
strcpy(name, "sqlexec");
ret = strcmp(name,"aaaaaaaaaaaaaaaaaaaaaaaa");

for( loop=0;loop<attempts;loop++ )

       shmctl( shmid[loop],IPC_RMID,0 );

printf( "\n\tRemoved All Segments ... \n\n");
exit( 0 );
}

%gcc -O -o x x.c
%./x

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

#7 lore raw
In reply to umut aymakoglu

probably either shmget or shmat failed. There should not be any shmget or shmat error.

i attached a working one.

thanks,
Umut

Quoted 6 lines · Tony

Didn't compile ... "ret" undefined ... so I fixed that, but
then it SEGV'd on the "strcpy" ... it didn't make it to the
strcmp().

Quoted 57 lines

-Tony

Quoted 54 lines

-----Original Message-----
From: umut aymakoglu [mailto:[email protected]]
Sent: Monday, January 05, 2004 4:04 PM
To: Luck, Tony; [email protected]
Cc: [email protected]
Subject: RE: segv at strcmp

Ok - I have a small repro that segvs.

#include <stdio.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <string.h>
#include <stdlib.h>

#define SHMBASE 0x200000000
#define AL (1024*1024)
#define MAXSEGMENTS 1

#ifndef SHM_R
#define SHM_R 0400
#endif
#ifndef SHM_W
#define SHM_W 0660
#endif

#define SHM_MODE ( SHM_R | SHM_W | IPC_CREAT )
#define KEY2SUCKS 0x52435200

unsigned long sizes[MAXSEGMENTS] ={720896};

main()
{

    int  shmid[MAXSEGMENTS];
    char *shmptr[MAXSEGMENTS];
    long addr,mykey,loop,addr_save,attempts=0;
    int i;
    char *name;


    addr = SHMBASE;
    mykey  = KEY2SUCKS;
    attempts = 0;

for( loop=0;loop<MAXSEGMENTS;loop++ )
{

shmid[loop]=shmget((key_t)mykey,sizes[loop],SHM_MODE);

Quoted 5 lines
Quoted 5 lines

shmptr[loop]=(char
*)shmat(shmid[loop],(void*)addr,0);

/* ALign the size on SHMLBA(16K) */
sizes[loop]=(sizes[loop] + SHMLBA - 1) & ~(SHMLBA

Quoted 36 lines

-1);

Quoted 6 lines

addr=shmptr[attempts]+(unsigned long)sizes[loop];

addr_save = addr;
   printf("addr1 = %p\n",addr);

/* aLign the Address on 1MB */
addr=(char *)(((unsigned long)addr + AL-1) &

~(AL-1));

Quoted 28 lines
   
   printf("addr2 = %p\n",addr);
   attempts++;
   mykey++;
}

name = ((unsigned long)addr_save - 16);
printf("%p\n",name);
strcpy(name, "sqlexec");
ret = strcmp(name,"aaaaaaaaaaaaaaaaaaaaaaaa");

for( loop=0;loop<attempts;loop++ )

       shmctl( shmid[loop],IPC_RMID,0 );

printf( "\n\tRemoved All Segments ... \n\n");
exit( 0 );
}

%gcc -O -o x x.c
%./x

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

#include <stdio.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <string.h>
#include <stdlib.h>

#define SHMBASE 0x200000000
#define AL (1024*1024)
#define MAXSEGMENTS 1

#ifndef SHM_R
#define SHM_R 0400
#endif
#ifndef SHM_W
#define SHM_W 0660
#endif

#define SHM_MODE     ( SHM_R | SHM_W | IPC_CREAT )   /* Mode Read Write */
#define KEY2SUCKS    0x52435200                      /* Shared Mem Key */

unsigned long sizes[MAXSEGMENTS] ={720896};

main()
{

    int  shmid[MAXSEGMENTS];
    char *shmptr[MAXSEGMENTS];
    long addr,mykey,loop,addr_save,attempts=0;
    int i,ret;
    char *name;


    addr = SHMBASE;
    mykey  = KEY2SUCKS;
    attempts = 0;
  for( loop=0;loop<MAXSEGMENTS;loop++ ) 
    {
     if ((shmid[loop]= shmget( (key_t)mykey,sizes[loop],SHM_MODE)) == -1)
     {
      printf("shmget error\n");
      goto bad;

     }

     if((shmptr[loop]=(char *)shmat(shmid[loop],(void*)addr,0 )) == (void*)-1)
      {
       printf("shmat error\n");
       goto bad;
       }

/* ALign the size on SHMLBA(16K) */
sizes[loop] = (sizes[loop] + SHMLBA - 1) & ~(SHMLBA - 1);

  addr = shmptr[attempts] + (unsigned long)sizes[loop];
  addr_save = addr;
   printf("addr1 = %p\n",addr); 

/* aLign the Address on 1MB */
addr = (char *)(((unsigned long)addr + AL-1) & ~(AL-1)); printf("addr2 = %p\n",addr);

attempts++;
mykey++;

} /* end for loop */

   name = ((unsigned long)addr_save - 16); 
   printf("%p\n",name);
   strcpy(name, "sqlexec");

   ret = strcmp(name,"aaaaaaaaaaaaaaaaaaaaaaaa");

bad:
for( loop=0;loop<attempts;loop++ )

         shmctl( shmid[loop],IPC_RMID,0 );
   
    printf( "\n\tRemoved All Segments ... \n\n");
    exit( 0 );

}

#8 lore raw
In reply to umut aymakoglu

The size rounding is wrong:

sizes[loop] = (sizes[loop] + SHMLBA - 1) & ~(SHMLBA - 1);

will make addr falls outside the shared memory segment, which is the reason why segfault on strcpy. Once that is fixed, it doesn't segfault on strcmp either.

- Ken

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of umut aymakoglu
Sent: Monday, January 05, 2004 5:38 PM
To: Luck, Tony; [email protected]
Cc: [email protected]
Subject: RE: segv at strcmp

probably either shmget or shmat failed. There should not be any shmget or shmat error.

i attached a working one.

thanks,
Umut

Quoted 6 lines · Tony

Didn't compile ... "ret" undefined ... so I fixed that, but
then it SEGV'd on the "strcpy" ... it didn't make it to the
strcmp().

Quoted 57 lines

-Tony

Quoted 54 lines

-----Original Message-----
From: umut aymakoglu [mailto:[email protected]]
Sent: Monday, January 05, 2004 4:04 PM
To: Luck, Tony; [email protected]
Cc: [email protected]
Subject: RE: segv at strcmp

Ok - I have a small repro that segvs.

#include <stdio.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <string.h>
#include <stdlib.h>

#define SHMBASE 0x200000000
#define AL (1024*1024)
#define MAXSEGMENTS 1

#ifndef SHM_R
#define SHM_R 0400
#endif
#ifndef SHM_W
#define SHM_W 0660
#endif

#define SHM_MODE ( SHM_R | SHM_W | IPC_CREAT )
#define KEY2SUCKS 0x52435200

unsigned long sizes[MAXSEGMENTS] ={720896};

main()
{

    int  shmid[MAXSEGMENTS];
    char *shmptr[MAXSEGMENTS];
    long addr,mykey,loop,addr_save,attempts=0;
    int i;
    char *name;


    addr = SHMBASE;
    mykey  = KEY2SUCKS;
    attempts = 0;

for( loop=0;loop<MAXSEGMENTS;loop++ )
{

shmid[loop]=shmget((key_t)mykey,sizes[loop],SHM_MODE);

Quoted 5 lines
Quoted 5 lines

shmptr[loop]=(char
*)shmat(shmid[loop],(void*)addr,0);

/* ALign the size on SHMLBA(16K) */
sizes[loop]=(sizes[loop] + SHMLBA - 1) & ~(SHMLBA

Quoted 36 lines

-1);

Quoted 6 lines

addr=shmptr[attempts]+(unsigned long)sizes[loop];

addr_save = addr;
   printf("addr1 = %p\n",addr);

/* aLign the Address on 1MB */
addr=(char *)(((unsigned long)addr + AL-1) &

~(AL-1));

Quoted 28 lines
   
   printf("addr2 = %p\n",addr);
   attempts++;
   mykey++;
}

name = ((unsigned long)addr_save - 16);
printf("%p\n",name);
strcpy(name, "sqlexec");
ret = strcmp(name,"aaaaaaaaaaaaaaaaaaaaaaaa");

for( loop=0;loop<attempts;loop++ )

       shmctl( shmid[loop],IPC_RMID,0 );

printf( "\n\tRemoved All Segments ... \n\n");
exit( 0 );
}

%gcc -O -o x x.c
%./x

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

#9 lore raw
In reply to umut aymakoglu

The problem seems to be the gcc 3.2-29 we have on United Linux 1.0. The binary built with this does not also work on RedHat. The binary built with gcc 3.2.3-20 on Redhat works fine.

The problem with the segv at strcpy() was due to the unaligned size. I have attached the corrected program.

Does anybody know where i can find the latest fixpack on United Linux 1.0?

thanks,
Umut

--- "Chen, Kenneth W" <[email protected]>

Quoted 76 lines · wrote:

The size rounding is wrong:

sizes[loop] = (sizes[loop] + SHMLBA - 1) & ~(SHMLBA
- 1);

will make addr falls outside the shared memory segment, which is the
reason why segfault on strcpy. Once that is fixed, it doesn't segfault
on strcmp either.

- Ken

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of umut aymakoglu
Sent: Monday, January 05, 2004 5:38 PM
To: Luck, Tony; [email protected]
Cc: [email protected]
Subject: RE: segv at strcmp

probably either shmget or shmat failed. There should not be any shmget or shmat error.

i attached a working one.

thanks,
Umut

Quoted 3 lines · Tony

Didn't compile ... "ret" undefined ... so I fixed
that, but
then it SEGV'd on the "strcpy" ... it didn't make

it

Quoted 7 lines

to the
strcmp().

-Tony

Quoted 2 lines

-----Original Message-----
From: umut aymakoglu

[mailto:[email protected]]

Quoted 29 lines
Quoted 29 lines

Sent: Monday, January 05, 2004 4:04 PM
To: Luck, Tony; [email protected]
Cc: [email protected]
Subject: RE: segv at strcmp

Ok - I have a small repro that segvs.

#include <stdio.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <string.h>
#include <stdlib.h>

#define SHMBASE 0x200000000
#define AL (1024*1024)
#define MAXSEGMENTS 1

#ifndef SHM_R
#define SHM_R 0400
#endif
#ifndef SHM_W
#define SHM_W 0660
#endif

Quoted 26 lines
Quoted 1 line
Quoted 1 line

#define SHM_MODE ( SHM_R | SHM_W | IPC_CREAT

)

Quoted 23 lines
Quoted 22 lines

#define KEY2SUCKS 0x52435200

unsigned long sizes[MAXSEGMENTS] ={720896};

main()
{

    int  shmid[MAXSEGMENTS];
    char *shmptr[MAXSEGMENTS];
    long addr,mykey,loop,addr_save,attempts=0;
    int i;
    char *name;


    addr = SHMBASE;
    mykey  = KEY2SUCKS;
    attempts = 0;

for( loop=0;loop<MAXSEGMENTS;loop++ )
{

shmid[loop]=shmget((key_t)mykey,sizes[loop],SHM_MODE);

Quoted 42 lines
Quoted 5 lines
Quoted 5 lines

shmptr[loop]=(char
*)shmat(shmid[loop],(void*)addr,0);

/* ALign the size on SHMLBA(16K) */
sizes[loop]=(sizes[loop] + SHMLBA - 1) &

~(SHMLBA

Quoted 2 lines

-1);

Quoted 1 line

addr=shmptr[attempts]+(unsigned

long)sizes[loop];

Quoted 32 lines
Quoted 5 lines
addr_save = addr;
   printf("addr1 = %p\n",addr);

/* aLign the Address on 1MB */
addr=(char *)(((unsigned long)addr + AL-1) &

~(AL-1));

Quoted 26 lines
   
   printf("addr2 = %p\n",addr);
   attempts++;
   mykey++;
}

name = ((unsigned long)addr_save - 16);
printf("%p\n",name);
strcpy(name, "sqlexec");
ret = strcmp(name,"aaaaaaaaaaaaaaaaaaaaaaaa");

for( loop=0;loop<attempts;loop++ )

       shmctl( shmid[loop],IPC_RMID,0 );

printf( "\n\tRemoved All Segments ... \n\n");
exit( 0 );
}

%gcc -O -o x x.c
%./x

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and

sharing.

Quoted 8 lines
Quoted 2 lines
Quoted 2 lines

http://photos.yahoo.com/

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

#include <stdio.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <string.h>
#include <stdlib.h>

#define SHMBASE 0x200000000
#define AL (1024*1024)
#define MAXSEGMENTS 1

#ifndef SHM_R
#define SHM_R 0400
#endif
#ifndef SHM_W
#define SHM_W 0660
#endif

#define SHM_MODE     ( SHM_R | SHM_W | IPC_CREAT )   /* Mode Read Write */
#define KEY2SUCKS    0x52435200                      /* Shared Mem Key */

unsigned long sizes[MAXSEGMENTS] ={1024*1024};

main()
{

    int  shmid[MAXSEGMENTS];
    char *shmptr[MAXSEGMENTS];
    long addr,mykey,loop,addr_save,attempts=0;
    int i,ret;
    char *name;


    addr = SHMBASE;
    mykey  = KEY2SUCKS;
    attempts = 0;
  for( loop=0;loop<MAXSEGMENTS;loop++ ) 
    {
   printf("size before= %d\n",sizes[loop]);
     if ((shmid[loop]= shmget( (key_t)mykey,sizes[loop],SHM_MODE)) == -1)
     {
      printf("shmget error\n");
      goto bad;

     }

     if((shmptr[loop]=(char *)shmat(shmid[loop],(void*)addr,0 )) == (void*)-1)
      {
       printf("shmat error\n");
       goto bad;
       }
   sizes[loop] = (sizes[loop] + AL - 1) & ~(AL - 1);
   printf("size before= %d\n",sizes[loop]);
  addr = shmptr[attempts] + (unsigned long)sizes[loop];
   printf("addr1 = %p\n",addr); 

attempts++;
mykey++;

/* aLign the Address on 1MB */
addr = (char *)(((unsigned long)addr + AL-1) & ~(AL-1)); printf("addr2 = %p\n",addr);

} /* end for loop */

   name = ((unsigned long)addr - 16); 
   printf("%p\n",name);
   strcpy(name, "sqlexec");

   ret = strcmp(name,"aaaaaaaaaaaaaaaaaaaaaaaa");

bad:
for( loop=0;loop<attempts;loop++ )

         shmctl( shmid[loop],IPC_RMID,0 );
   
    printf( "\n\tRemoved All Segments ... \n\n");
    exit( 0 );

}