Skip to contentSkip to conversation

via82xx: DXS channels

PATCH Timo Hirvonen 3 participants 3 messages Jan 12, 2004 – Jan 14, 2004

lore
Share & tools
lore
#0 lore raw

Hi!

I tested DXS channels of my via82xx chip. My motherboard is ASRock K7VT2 and the kernel is 2.6.1-mm2.

With dxs_support=1 option DXS channels did not work (bad sound quality) but they did with dxs_support=4.

I noticed the volume ranges for DXS channels are wrong (0-255), should be 0-31. Here is a patch which fixes the problem and adds ASRock K7VT2 to the dxs_whitelist. I don't know if this works on other motherboards!

Timo

pci/via82xx.c renamed from pci/via82xx.c.orig +6 -5
@@ -1481,7 +1481,7 @@ static int snd_via8233_dxs_volume_info(s
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 	uinfo->count = 2;
 	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = 0xff;
+	uinfo->value.integer.max = 31;
 	return 0;
 }
 
@@ -1489,8 +1489,8 @@ static int snd_via8233_dxs_volume_get(sn
 {
 	via82xx_t *chip = snd_kcontrol_chip(kcontrol);
 	unsigned int idx = snd_ctl_get_ioff(kcontrol, &ucontrol->id);
-	ucontrol->value.integer.value[0] = 0xff - chip->playback_volume[idx][0];
-	ucontrol->value.integer.value[1] = 0xff - chip->playback_volume[idx][1];
+	ucontrol->value.integer.value[0] = 31 - chip->playback_volume[idx][0];
+	ucontrol->value.integer.value[1] = 31 - chip->playback_volume[idx][1];
 	return 0;
 }
 
@@ -1502,13 +1502,13 @@ static int snd_via8233_dxs_volume_put(sn
 	unsigned char val;
 	int change;
 
-	val = 0xff - ucontrol->value.integer.value[0];
+	val = 31 - ucontrol->value.integer.value[0];
 	change = val != chip->playback_volume[idx][0];
 	if (change) {
 		chip->playback_volume[idx][0] = val;
 		outb(val, port + VIA_REG_OFS_PLAYBACK_VOLUME_L);
 	}
-	val = 0xff - ucontrol->value.integer.value[1];
+	val = 31 - ucontrol->value.integer.value[1];
 	change |= val != chip->playback_volume[idx][1];
 	if (change) {
 		chip->playback_volume[idx][1] = val;
@@ -1986,6 +1986,7 @@ static int __devinit check_dxs_list(stru
 		{ .vendor = 0x1043, .device = 0x80a1, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8-X */
 		{ .vendor = 0x1043, .device = 0x80b0, .action = VIA_DXS_ENABLE }, /* ASUS A7V600 */
 		{ .vendor = 0x10cf, .device = 0x118e, .action = VIA_DXS_ENABLE }, /* FSC laptop */
+		{ .vendor = 0x1106, .device = 0x4161, .action = VIA_DXS_NO_VRA }, /* ASRock K7VT2 */
 		{ .vendor = 0x1297, .device = 0xc160, .action = VIA_DXS_ENABLE }, /* Shuttle SK41G */
 		{ .vendor = 0x1458, .device = 0xa002, .action = VIA_DXS_ENABLE }, /* Gigabyte GA-7VAXP */
 		{ .vendor = 0x147b, .device = 0x1401, .action = VIA_DXS_ENABLE }, /* ABIT KD7(-RAID) */
#1 lore raw

At Tue, 13 Jan 2004 00:33:51 +0200,

Quoted 7 lines · Timo Hirvonen

[1 <text/plain; ISO-8859-1 (8bit)>]
Hi!

I tested DXS channels of my via82xx chip. My motherboard is ASRock K7VT2 and the kernel is 2.6.1-mm2.

Quoted 7 lines

With dxs_support=1 option DXS channels did not work (bad sound quality) but they did with dxs_support=4.

I noticed the volume ranges for DXS channels are wrong (0-255), should be 0-31. Here is a patch which fixes the problem and adds ASRock K7VT2 to the dxs_whitelist. I don't know if this works on other motherboards!

thanks!
applied to cvs with a minor modification.

ciao,

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html

#2 lore raw
In reply to Timo Hirvonen

I will test it. for A7v8X-X

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

Mensaje original <<<<<<<<<<<<<<<<<<

El 13/01/04, 4:33:51, Timo Hirvonen <[email protected]> escribió sobre el tema [Alsa-devel] via82xx: DXS channels:

Quoted 8 lines

Hi!

I tested DXS channels of my via82xx chip. My motherboard is ASRock K7VT2 and the kernel is 2.6.1-mm2.

With dxs_support=1 option DXS channels did not work (bad sound quality) but they did with dxs_support=4.

Quoted 6 lines

I noticed the volume ranges for DXS channels are wrong (0-255), should be 0-31. Here is a patch which fixes the problem and adds ASRock K7VT2 to the dxs_whitelist. I don't know if this works on other motherboards!

Timo

-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html