Skip to contentSkip to conversation

put shaping on ppp or eth?

LARTC Cord Buhlert 3 participants 4 messages Jan 15, 2004 – Jan 16, 2004

lore
Share & tools
lore
#1 lore raw
Quoted 4 lines · Cord Buhlert

Hi,
I wanna do some shaping on a DSL line that is plugged to the eth1 nic. Should I attach the qdiscs directly to the ppp device or can I use the eth1 device instead? What (and why) makes more sense?

i think you should use ppp device :)
dunno why

Signature · 10 lines
Sincerely, Artūras Šlajus
ICQ: 157929934
Jabber: [email protected]

Oh, and please'o'please use UTF-8! :-)


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Cord Buhlert
Quoted 9 lines · Artu-ras Šlajus
Quoted 4 lines · Cord Buhlert

Hi,
I wanna do some shaping on a DSL line that is plugged to the eth1 nic. Should I attach the qdiscs directly to the ppp device or can I use the eth1 device instead? What (and why) makes more sense?

i think you should use ppp device :)
dunno why

yes, you should use the ppp device, because you'll only get PPPoE packets on the ethernet device, and you won't be able to shape them.

Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     [email protected]
SnapGear - A CyberGuard Company ---    ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ---  Free Embedded Linux Distro at   http://www.snapgear.org  ---

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/