DMA problem
There are many reasons for this Problem. Which Kernel Version are you running (uname -a). Which distribution? SuSE, Debian, Mandrake, RedHat?
Quoted 85 lines · claude parisot
Hello !
Sorry to post a seconfd message on the list, I am only trying to get an answern for this - it seems so - DMA-problem ??
I have some
problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot mount any CD or burn a CDR or CD-RW, except if I disable DMA with following command :# hdparm -d0/dev/hdd, a little bit annoying, isn't it ?If I insert a cdrom in the drive the led doesn't go out, it flashes as usual but it stays green.
It seems to be a DMA-problem or a kernel-bug ??? Its only a supposition, I am a Linux-newbie, and I am looking for an explanation and a solution ....
By mounting a cdrom I get following error messages :
Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout: pid 102, scsi0, channel 0, id 1, lun 0
0x2800 00 00 00 10 00 00 01 00Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy } Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy } Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for secondhalf of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to timeout : pid 103, scsi0, channel 0, id 1, lun 00x2800 00 00 00 10 00 rive not ready for commandAnd then I have a freeze or at least a blocking of the sysem. I have to reboot.
Could someone give me an explanation of what is happening and a way to solve the problem .... is this a kernel-bug ? Or an incompatibility between the motherboard and the drive ??
If you choose to help me, please don't be to esoteric, as I already said, I am a newbie.
Please, could you Cc all answers to the adress :
My apologizes for my english ....
Claude
System : Pentium 2,8C
Asus P4P800 DeLuxe
Intel I865PE-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/