still hammerfall-mem on hdsp?
Hi,
hope this list is o.k. for this question:
I try to get the alsa-drivers for the hdsp compiled with alsa-cvs of today. After successful compile the snd-hammerfall_mem module doesn't seem to be compiled and thus can't get modprobed. Isn't it needed any more? I couldn't find any information about that in the docs.
Maybe someone can help with configure options or anything to get the module compiled (the snd-hammerfall_mem.c file is there but the .o file is missing) if it is needed or what else to do to get the rme working.
The docs I found reflect my last knowledge that you need to modprobe snd-hammerfall_mem and snd-hdsp first and then run hdsploader to install the firmware.
Thanks,
Orm
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Quoted 4 lines
Maybe someone can help with configure options or anything to get the module compiled (the
snd-hammerfall_mem.cfile is there but the .o file is missing) if it is needed or what else to do to get the rme working.
afaik the memory allocation for the hdsp moved from snd-hammerfall-mem to snd-page-alloc...
you shouldn't need this...
Tim mailto:[email protected]
ICQ: 96771783
--
The only people for me are the mad ones, the ones who are mad to live, mad to talk, mad to be saved, desirous of everything at the same time, the ones who never yawn or say a commonplace thing, but burn, burn, burn, like fabulous yellow roman candles exploding like spiders across the stars and in the middle you see the blue centerlight pop and everybody goes "Awww!"
Jack Kerouac
Signature · 18 lines
Tim mailto:[email protected] ICQ: 96771783 -- The only people for me are the mad ones, the ones who are mad to live, mad to talk, mad to be saved, desirous of everything at the same time, the ones who never yawn or say a commonplace thing, but burn, burn, burn, like fabulous yellow roman candles exploding like spiders across the stars and in the middle you see the blue centerlight pop and everybody goes "Awww!" Jack Kerouac ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn
Am 17. Januar 2004, 14:31 Uhr (+0100) schrieb Tim Blechmann:
Quoted 2 lines
you shouldn't need this...
Thanks. I get snd-hdsp loaded and the firmware uploaded. "cat /proc/asound/card0/hdsp" looks good. But when I try to run alsamixer i get
no mixer elems found
This is a freshly installed machine and I fear there are some missing device links or something. I ran the snddevices script in alsa-driver. Bear with me if this is stupid and just point me to appropriate readmes if possible.
--
Orm
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Quoted 8 lines · Orm Finnendahl
Am 17. Januar 2004, 14:31 Uhr (+0100) schrieb Tim Blechmann:
Quoted 2 lines
you shouldn't need this...
Thanks. I get snd-hdsp loaded and the firmware uploaded. "cat
/proc/asound/card0/hdsp" looks good. But when I try to run alsamixer i get
Quoted 6 lines
no mixer elems found
This is a freshly installed machine and I fear there are some missing device links or something. I ran the snddevices script in alsa-driver. Bear with me if this is stupid and just point me to appropriate readmes if possible.
it doesnt have a mixer, other than the hardware matrix mixer. Docs are on the website, but try
amixer cset numid=5 26,0,32768
amixer cset numid=5 27,1,32768
to route playback channels 1 and 2 to multiface analogue channels 1,2 or digiface adat1 channels 1 and 2.
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Justin Cormack wrote on Sat, 17-Jan-2004:
Quoted 11 lines · Orm Finnendahl
Quoted 10 lines
Am 17. Januar 2004, 14:31 Uhr (+0100) schrieb Tim Blechmann:
Quoted 2 lines
you shouldn't need this...
Thanks. I get snd-hdsp loaded and the firmware uploaded. "cat
/proc/asound/card0/hdsp" looks good. But when I try to run alsamixer i getno mixer elems found
Quoted 7 lines
Quoted 4 lines
This is a freshly installed machine and I fear there are some missing device links or something. I ran the snddevices script in alsa-driver. Bear with me if this is stupid and just point me to appropriate readmes if possible.
it doesnt have a mixer, other than the hardware matrix mixer. Docs are on the website, but try
You really need to use hdspmixer and hdspconf, they are available in the alsa-tools (or utils, not sure). The former is TotalMix clone to give a full GUI to the powerful matrix mixer. hdspconf lets you set other settings (clock sync/rate, adat/optical input, etc)
jlc
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Am 17. Januar 2004, 18:04 Uhr (+0000) schrieb Justin Cormack:
Quoted 3 lines
amixer cset numid=5 26,0,32768
amixer cset numid=5 27,1,32768
alsaplayer works now. Thanks a lot!
--
Orm
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn