Skip to contentSkip to conversation

problem with wrr+prio

LARTC Andrew Leiserson 1 participant 1 message Jan 19, 2004

lore
Share & tools
lore
#0 lore raw

I have set up wrr successfully on my bridge/shaper machine. That much works fine. I originally used sfq in the inner classes. However, there was a problem with high-bandwidth connections (web downloads, bittorrent) starving low-bandwidth low-latency connections like ssh. I would like to use prio or similar to prioritize the interactive traffic, but it does not seem to work. I have tested with "ping -Q 0x10" and qualitative evaluation of ssh latency. Both tests get very bad (~ 0.5-1 sec) as soon as I start a web download. I have checked with tcpdump that the TOS is set to 0x10. The machine is 2.4.23, with ebtables and wrr patches. Any ideas?

Thanks.

Here is my script:

shape () {

DEV=$1
WRR_DIRECTION=$2

   # clean existing down- and uplink qdiscs, hide errors
   tc qdisc del dev $DEV root 2> /dev/null > /dev/null
   # install root HTB
   tc qdisc add dev $DEV root handle 8000: htb default 1
   tc class add dev $DEV parent 8000:0 classid 8000:1 htb \
      rate ${RATE}kbit prio 2

   # add wrr for correct direction, matching ip, # classes, no proxy
   # remap
   tc qdisc add dev $DEV parent 8000:1 handle 8001: \
      wrr $WRR_DIRECTION ip $WRR_MAX_CLASSES 0

   declare -i NUM=$WRR_MAX_CLASSES;
   while [ $NUM -ge 1 ]; do
      HNUM=$(printf %X $NUM)
      tc qdisc add dev $DEV parent 8001:$HNUM handle $HNUM: prio
      NUM=$NUM-1
   done

   tc class add dev $DEV parent 8000:0 classid 8000:2 htb prio 1 \
      rate ${RATE}kbit
   tc filter add dev $DEV parent 8000: protocol ip pref 10 \
      u32 match ip src $LOCAL_ADDR flowid 8000:2
   tc filter add dev $DEV parent 8000: protocol ip pref 10 \
      u32 match ip dst $LOCAL_ADDR flowid 8000:2
   tc qdisc add dev $DEV parent 8000:2 handle 8002: pfifo

   tc qdisc change handle 8001 dev $DEV wrr qdisc \
      wmode1=3 wmode2=0

   declare -i NUM=$WRR_MAX_CLASSES;
   while [ $NUM -ge 1 ]; do
      HNUM=$(printf %X $NUM)
      tc class change classid 8001:$HNUM dev $DEV \
         wrr min1=0.5 max1=1.0 decr1=0.0000000254 \
                incr1=0.00083333333 weight1=1.0 \
             min2=0.1 max2=1.0 decr2=0 incr2=0 weight2=1.0
      NUM=$NUM-1
   done

}

shape $IFACE_IN dest
shape $IFACE_OUT sour

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/