11/11: Kconfig/Makefile changes for #5-10
PATCH 1/1 11/11: Kconfig/Makefile changes for #5-10
ir262_dongles-11_makefile-2.diff :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<apply after all other patches> <Patch from Martin Diehl>
* include build information for new dongle drivers (5->10)
drivers/net/irda/Kconfig renamed from drivers/net/irda.d6/Kconfig +79 -10
@@ -65,6 +65,75 @@ config TEKRAM_DONGLE dongles you will have to start irattach like this: "irattach -d tekram". +config LITELINK_DONGLE + tristate "Parallax LiteLink dongle" + depends on DONGLE && IRDA + help + Say Y here if you want to build support for the Parallax Litelink + dongle. To compile it as a module, choose M here. The Parallax + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Parallax + dongles you will have to start irattach like this: + "irattach -d litelink". + +config MA600_DONGLE + tristate "Mobile Action MA600 dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Mobile Action MA600 + dongle. To compile it as a module, choose M here. The MA600 dongle + attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. The driver should also support + the MA620 USB version of the dongle, if the integrated USB-to-RS232 + converter is supported by usbserial. To activate support for + MA600 dongle you will have to start irattach like this: + "irattach -d ma600". + +config GIRBIL_DONGLE + tristate "Greenwich GIrBIL dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Greenwich GIrBIL + dongle. If you want to compile it as a module, choose M here. + The Greenwich dongle attaches to the normal 9-pin serial port + connector, and can currently only be used by IrTTY. To activate + support for Greenwich dongles you will have to start irattach + like this: "irattach -d girbil". + +config MCP2120_DONGLE + tristate "Microchip MCP2120" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Microchip MCP2120 + dongle. If you want to compile it as a module, choose M here. + The MCP2120 dongle attaches to the normal 9-pin serial port + connector, and can currently only be used by IrTTY. To activate + support for MCP2120 dongles you will have to start irattach + like this: "irattach -d mcp2120". + + You must build this dongle yourself. For more information see: + <http://www.eyetap.org/~tangf/irda_sir_linux.html> + +config OLD_BELKIN_DONGLE + tristate "Old Belkin dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Adaptec Airport 1000 + and 2000 dongles. If you want to compile it as a module, choose + M here. Some information is contained in the comments + at the top of <file:drivers/net/irda/old_belkin.c>. + +config ACT200L_DONGLE + tristate "ACTiSYS IR-200L dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the ACTiSYS IR-200L + dongle. If you want to compile it as a module, choose M here. + The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial + port connector, and can currently only be used by IrTTY. + To activate support for ACTiSYS IR-200L dongle you will have to + start irattach like this: "irattach -d act200l". + comment "Old SIR device drivers" config IRPORT_SIR
@@ -130,7 +199,7 @@ config TEKRAM_DONGLE_OLD dongles you will have to start irattach like this: "irattach -d tekram". -config GIRBIL_DONGLE +config GIRBIL_DONGLE_OLD tristate "Greenwich GIrBIL dongle" depends on DONGLE_OLD && IRDA help
@@ -141,7 +210,7 @@ config GIRBIL_DONGLE dongles you will have to insert "irattach -d girbil" in the /etc/irda/drivers script. -config LITELINK_DONGLE +config LITELINK_DONGLE_OLD tristate "Parallax LiteLink dongle" depends on DONGLE_OLD && IRDA help
@@ -152,7 +221,7 @@ config LITELINK_DONGLE dongles you will have to start irattach like this: "irattach -d litelink". -config MCP2120_DONGLE +config MCP2120_DONGLE_OLD tristate "Microchip MCP2120" depends on DONGLE_OLD && IRDA help
@@ -166,7 +235,7 @@ config MCP2120_DONGLE You must build this dongle yourself. For more information see: <http://www.eyetap.org/~tangf/irda_sir_linux.html> -config OLD_BELKIN_DONGLE +config OLD_BELKIN_DONGLE_OLD tristate "Old Belkin dongle" depends on DONGLE_OLD && IRDA help
@@ -175,11 +244,7 @@ config OLD_BELKIN_DONGLE will be called old_belkin. Some information is contained in the comments at the top of <file:drivers/net/irda/old_belkin.c>. -config EP7211_IR - tristate "EP7211 I/R support" - depends on DONGLE_OLD && ARCH_EP7211 && IRDA - -config ACT200L_DONGLE +config ACT200L_DONGLE_OLD tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)" depends on DONGLE_OLD && EXPERIMENTAL && IRDA help
@@ -190,7 +255,7 @@ config ACT200L_DONGLE ACTiSYS IR-200L dongles you will have to start irattach like this: "irattach -d act200l". -config MA600_DONGLE +config MA600_DONGLE_OLD tristate "Mobile Action MA600 dongle (EXPERIMENTAL)" depends on DONGLE_OLD && EXPERIMENTAL && IRDA ---help---
@@ -205,6 +270,10 @@ config MA600_DONGLE There is a pre-compiled module on <http://engsvr.ust.hk/~eetwl95/download/ma600-2.4.x.tar.gz> + +config EP7211_IR + tristate "EP7211 I/R support" + depends on DONGLE_OLD && ARCH_EP7211 && IRDA comment "FIR device drivers"
drivers/net/irda/Makefile renamed from drivers/net/irda.d6/Makefile +12 -6
@@ -21,20 +21,26 @@ obj-$(CONFIG_VIA_FIR) += via-ircc.o obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o obj-$(CONFIG_ACTISYS_DONGLE_OLD) += actisys.o -obj-$(CONFIG_GIRBIL_DONGLE) += girbil.o -obj-$(CONFIG_LITELINK_DONGLE) += litelink.o -obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin.o +obj-$(CONFIG_GIRBIL_DONGLE_OLD) += girbil.o +obj-$(CONFIG_LITELINK_DONGLE_OLD) += litelink.o +obj-$(CONFIG_OLD_BELKIN_DONGLE_OLD) += old_belkin.o +obj-$(CONFIG_MCP2120_DONGLE_OLD) += mcp2120.o +obj-$(CONFIG_ACT200L_DONGLE_OLD) += act200l.o +obj-$(CONFIG_MA600_DONGLE_OLD) += ma600.o obj-$(CONFIG_EP7211_IR) += ep7211_ir.o -obj-$(CONFIG_MCP2120_DONGLE) += mcp2120.o obj-$(CONFIG_AU1000_FIR) += au1k_ir.o -obj-$(CONFIG_ACT200L_DONGLE) += act200l.o -obj-$(CONFIG_MA600_DONGLE) += ma600.o # New SIR drivers obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o # New dongles drivers for new SIR drivers obj-$(CONFIG_ESI_DONGLE) += esi-sir.o obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o obj-$(CONFIG_ACTISYS_DONGLE) += actisys-sir.o +obj-$(CONFIG_LITELINK_DONGLE) += litelink-sir.o +obj-$(CONFIG_GIRBIL_DONGLE) += girbil-sir.o +obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin-sir.o +obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o +obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o +obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o # The SIR helper module sir-dev-objs := sir_core.o sir_dev.o sir_dongle.o sir_kthread.o