Skip to contentSkip to conversation

Problem compiling for linux 2.6

DISCUSSION Giuliano Pochini 2 participants 3 messages Jan 28, 2004 – Jan 29, 2004

lore
Share & tools
lore
#0 lore raw

It fails at line #113 of /Makefile :

        @for d in $(SUBDIRS); do if ! $(MAKE) -C $$d prepare; then exit 1; fi; done

I have no idea why $(SUBDIRS) is an empty string:

[Giu@Jay alsa-driver-1.0.2]$ ./cvscompile --with-cards=powermac --with-isapnp=no --with-sequencer=no --with-oss=no --with-kernel=/opt/KernelSrc/l26 --with-debug=full [...]
copying file alsa-kernel/core/memalloc.c
patching file memalloc.c
/bin/sh: -c: line 1: syntax error near unexpected token `;'
/bin/sh: -c: line 1: `for d in ; do make -C $d prepare; done'
make[1]: *** [prepare] Error 2
make[1]: Leaving directory `/home/Giu/soft/alsa-driver-1.0.2/acore'
make: *** [dep] Error 1
[Giu@Jay alsa-driver-1.0.2]$ uname -a
Linux Jay 2.6.2-rc1-ben1 #2 SMP Wed Jan 28 22:19:17 CET 2004 ppc unknown

I'm using ALSA-1.0.2 after it was reuploaded. With linux 2.4 is compile just fine as usual. I'm using 2.6 for the first time... maybe I forgot to install/update something. :)

--
Giuliano.

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

#1 lore raw

At Thu, 29 Jan 2004 00:14:16 +0100,

Quoted 10 lines · Giuliano Pochini

It fails at line #113 of /Makefile :

        @for d in $(SUBDIRS); do if ! $(MAKE) -C $$d prepare; then exit 1; fi; done

I have no idea why $(SUBDIRS) is an empty string:

[Giu@Jay alsa-driver-1.0.2]$ ./cvscompile --with-cards=powermac --with-isapnp=no --with-sequencer=no --with-oss=no --with-kernel=/opt/KernelSrc/l26 --with-debug=full

note that --with-isapnp is ignored on 2.6 kernel. the isapnp support depends only on the kernel itself.

Quoted 11 lines

[...]
copying file alsa-kernel/core/memalloc.c
patching file memalloc.c
/bin/sh: -c: line 1: syntax error near unexpected token `;'
/bin/sh: -c: line 1: `for d in ; do make -C $d prepare; done'
make[1]: *** [prepare] Error 2
make[1]: Leaving directory `/home/Giu/soft/alsa-driver-1.0.2/acore'
make: *** [dep] Error 1
[Giu@Jay alsa-driver-1.0.2]$ uname -a
Linux Jay 2.6.2-rc1-ben1 #2 SMP Wed Jan 28 22:19:17 CET 2004 ppc unknown

Quoted 3 lines

I'm using ALSA-1.0.2 after it was reuploaded. With linux 2.4 is compile just fine as usual. I'm using 2.6 for the first time... maybe I forgot to install/update something. :)

does the attached patch work?

Takashi

Index: alsa-driver/Rules.make
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-driver/Rules.make,v retrieving revision 1.34

Rules.make +5 -4
diff -u -r1.34 Rules.make
@@ -17,8 +17,9 @@
 # apply patches beforehand
 prepare: $(clean-files)
 	@for d in $(patsubst %/,%,$(filter %/, $(obj-y))) \
-	          $(patsubst %/,%,$(filter %/, $(obj-m))); do \
-	 $(MAKE) -C $$d prepare; \
+	          $(patsubst %/,%,$(filter %/, $(obj-m))) DUMMY; do \
+	 echo $$d; \
+	 if [ $$d != DUMMY ]; then $(MAKE) -C $$d prepare; fi; \
 	done
 
 ALL_MOBJS := $(filter-out $(obj-y), $(obj-m))
@@ -29,8 +30,8 @@
 	cp $(ALL_MOBJS:.o=.ko) $(DESTDIR)$(moddir)/$(MODCURDIR)
 endif
 	@for d in $(patsubst %/,%,$(filter %/, $(obj-y))) \
-	          $(patsubst %/,%,$(filter %/, $(obj-m))); do \
-	 $(MAKE) -C $$d modules_install; \
+	          $(patsubst %/,%,$(filter %/, $(obj-m))) DUMMY; do \
+	 if [ $$d != DUMMY ]; then $(MAKE) -C $$d modules_install; fi; \
 	done
 
 else
#2 lore raw
Quoted 2 lines · On Thu, 29 Jan 2004 14:38:14 +0100 Takashi Iwai <[email protected]> wrote:

note that --with-isapnp is ignored on 2.6 kernel. the isapnp support depends only on the kernel itself.

Ok, I used that option only to avoid compiling useless stuff.

Quoted 1 line

does the attached patch work?

Yes it works. I compiled the modules successfully, after a few minor changes to my code. Thanks.

It only complains about SUBDIRS, but it seems harmless:

Building modules, stage 2.
/home/Giu/l26/scripts/Makefile.modpost:17: *** Uh-oh, you have stale module entries. You messed with SUBDIRS, /home/Giu/l26/scripts/Makefile.modpost:18: do not complain if something goes wrong.
MODPOST

--
Giuliano.

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn