Skip to contentSkip to conversation

two interfaces - borrowing bandwidth...

LARTC Michal Kustosik 2 participants 2 messages Jan 30, 2004

lore
Share & tools
lore
#0 lore raw

Hello...

I have one 2Mbit WAN interfaces and two vlan LAN interfaces - vlan2 and vlan3. I'd like to limit bandwidth something like this:
rate 1Mbit ceil 2Mbit for vlan2 and
rate 1Mbit ceil 2Mbit for vlan3
with possibility to borrow bandwidth between vlan2 and vlan3.

                 ^^^^^^^^^^^^^^^^^^^

Is it possible to do in any way?

regards,

Signature · 5 lines
Michal

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 10 lines · Michal Kustosik

Hello...

I have one 2Mbit WAN interfaces and two vlan LAN interfaces - vlan2 and vlan3. I'd like to limit bandwidth something like this:
rate 1Mbit ceil 2Mbit for vlan2 and
rate 1Mbit ceil 2Mbit for vlan3
with possibility to borrow bandwidth between vlan2 and vlan3.

                 ^^^^^^^^^^^^^^^^^^^

Is it possible to do in any way?

Yes. You can use the imq device. But there are some stability problems with it. Check the archives for this list for the last days for more information.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/