Skip to contentSkip to conversation

New: cpufreq: can't read cpu speed in both performance and powersave governor

Bugme-new Andrew Morton 1 participant 1 message Feb 4, 2004

lore
Share & tools
lore
#0 lore raw

Begin forwarded message:

Date: Wed, 4 Feb 2004 06:28:18 -0800
From: [email protected]
To: [email protected]
Subject: [Bugme-new] [Bug 2012] New: cpufreq: can't read cpu speed in both performance and powersave governor

http://bugme.osdl.org/show_bug.cgi?id=2012

Summary: cpufreq: can't read cpu speed in both performance and
powersave governor
Kernel Version: 2.6.2rc3
Status: NEW
Severity: normal
Owner: [email protected]
Submitter: [email protected]

Hardware Environment: x86 Intel Pentium 4 C 2.6GHz

Problem Description:
With Cpufreq, kernel 2.6.2rc3 + supermount patch + smp (CPU is Hypertreading) + preemptif

When governor is in powersave or performance, there isn't place for reading current cpu speed. (see below)

Steps to reproduce:

[root@mdk guiguid]# echo userspace > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor [root@mdk guiguid]# echo userspace > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor

-> setting governor to userspace

[root@mdk guiguid]# cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor userspace

-> check : ok

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 325000 650000 975000 1300000 1625000 1950000 2275000 2600000

--> freq aviable

[root@mdk guiguid]# echo 1000000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed [root@mdk guiguid]# echo 1000000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_setspeed

--> try an unsupported freq

[root@mdk guiguid]# cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_setspeed 1300000
[root@mdk guiguid]# cat [root@mdk guiguid]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
1300000

--> check : freq goes to the next supported ! Nice

[root@mdk guiguid]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping : 9
cpu MHz : 2598.871
cache size : 512 KB
....
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5128.19

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping : 9
cpu MHz : 2598.871
cache size : 512 KB
....
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5193.72

--> /proc/cpuinfo strange I don't see 1Ghz current freq !

[root@mdk guiguid]# echo 325000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_setspeed [root@mdk guiguid]# echo 325000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed

--> 325 MHz

[root@mdk guiguid]# hdparm -T /dev/hda

/dev/hda:
Timing buffer-cache reads: 1916 MB in 2.00 seconds = 956.23 MB/sec

--> testing direct memory read (by hdparm -T chache performance --> memory!)

[root@mdk guiguid]# echo 2600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed [root@mdk guiguid]# echo 2600000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_setspeed

--> at full speed 2.6GHz

[root@mdk guiguid]# hdparm -T /dev/hda

/dev/hda:
Timing buffer-cache reads: 3276 MB in 2.00 seconds = 1637.43 MB/sec

--> better, normal !

[root@mdk guiguid]# echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor [root@mdk guiguid]# echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

--> back to performance mode

[root@mdk guiguid]# cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_setspeed
cat: /sys/devices/system/cpu/cpu1/cpufreq/scaling_setspeed: No such file or directory

--> can't read current speed

[root@mdk guiguid]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping : 9
cpu MHz : 2598.871
cache size : 512 KB
...
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5128.19

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping : 9
cpu MHz : 2598.871
cache size : 512 KB
...
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5193.72

--> don't change as 1GHz (above)

I think it's a bug. Or if not, how could I read curent cpu speed.

Guillaume

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.