Problem with NFS, Linux 2.6.2
Subsystems (2)
Hi,
after switching to 2.6 I noticed a strange bug which makes my NFS setup unusable.
Setup:
Client: 2.6.2, nfs-utils 1.0.6
Server: 2.4.20, nfs-utils 1.0.6
/etc/exports on server contains:
/ aldi(rw,sync)
("aldi" is the client)
When I try to copy files from client to server, it will result in "cp" or any other editor going to uninterruptable sleep when the directory is mounted "hard", or cp will fail because of an Input/Output error when it is mounted "soft".
Strangely, this only applies if the file is larger than 1332 byte (!). A file filled with zeros of size 1332 copies nicely, one with 1333 bytes fails.
This is reproducable and does not occur if the client runs a 2.4 kernel. Mount options according to /proc/mounts are rw,nosuid,nodev,noexec,v3,rsize=8192,wsize=8192,soft,intr,udp,lock,addr=vdr ("vdr" is the server machine)
Any suggestions?
Thanks,
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 2 lines · Marcel Wiesweg
after switching to 2.6 I noticed a strange bug which makes my NFS setup unusable.
...
Quoted 1 line
Any suggestions?
Check your MTU on both ends. I had the same problem, and it turned out to be due to mismatched MTU's (1500 vs 1435). Unknown to me why this problem appeared with 2.6.
Cheers,
Kyle
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs