Skip to contentSkip to conversation

2.6.2-rc3: irq#19 - nobody cared - with an au88xx

DISCUSSION Daniel Jacobowitz 1 participant 1 message Feb 7, 2004

lore
Share & tools
lore
#0 lore raw

I've started getting this, every 24 hours or so:

irq 19: nobody cared!

Call Trace:
 [<c010d38a>] __report_bad_irq+0x2a/0x90
 [<c010d480>] note_interrupt+0x70/0xb0
 [<c010d7c0>] do_IRQ+0x160/0x1a0
 [<c0105000>] _stext+0x0/0x60
 [<c010b8d8>] common_interrupt+0x18/0x20
 [<c0108990>] default_idle+0x0/0x40
 [<c0105000>] _stext+0x0/0x60
 [<c01089bc>] default_idle+0x2c/0x40
 [<c0108a4b>] cpu_idle+0x3b/0x50
 [<c04b64a0>] unknown_bootoption+0x0/0x120
 [<c04b6926>] start_kernel+0x1a6/0x1f0
 [<c04b64a0>] unknown_bootoption+0x0/0x120

handlers:
[<f886b290>] (au_isr+0x0/0xb0 [au8830])
Disabling IRQ #19

and then sound doesn't work for a while.

There's a good chance this is my fault. IRQ 19 is:

19: 18500001 0 IO-APIC-level au88xx

and the au88xx driver is an out-of-tree driver that was developed on 2.4/early-2.5, and I ported it to 2.6 myself. It worked flawlessly on 2.6.0-test7; has something changed in how interrupt handlers are required to behave?

[Just ask if you actually want the source to this driver... I don't know enough about the card to actually submit it to Linus's tree and the driver's original authors aparently didn't care to.]

Signature · 2 lines
Daniel Jacobowitz
MontaVista Software                         Debian GNU/Linux Developer