SATA / IRQ ICH5 problems
I'm not sure if this has been reported earlier, I've googled a little bit but no luck.
I've recently installed a SATA drive (maxtor 160G) on a abit ic7-g (i875p ICH5 MoBo) and I've tried to use it with 2.6.2-mm1 kernel; I've already in place a normal 60 Gb HD and a DVD burner on standard ide controllers.
The first thing I've noticed is that when I enable from bios menu the SATA controller, the internal nic stops working, reporting errors like this:
======================================
Feb 7 16:16:36 kefk kernel: e1000: eth0 NIC Link is Up 100 Mbps Full Duplex Feb 7 16:16:41 kefk kernel: NETDEV WATCHDOG: eth0: transmit timed out Feb 7 16:16:43 kefk kernel: e1000: eth0 NIC Link is Up 100 Mbps Full
Duplex
======================================
Looking at syslog, I've seen this:
======================================
Feb 7 16:14:49 kefk kernel: hub 1-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x501 Feb 7 16:14:49 kefk kernel: irq 18: nobody cared! Feb 7 16:14:49 kefk kernel: Call Trace: Feb 7 16:14:49 kefk kernel: [<c010b8b0>] __report_bad_irq+0x24/0x81 Feb 7 16:14:49 kefk kernel: [<c010b7c1>] do_IRQ+0x12f/0x1fa Feb 7 16:14:49 kefk kernel: [<c032c840>] common_interrupt+0x18/0x20 Feb 7 16:14:49 kefk kernel: [<c032007b>] .text.lock.xfrm_policy+0x9c/0xc9 Feb 7 16:14:49 kefk kernel: Feb 7 16:14:49 kefk kernel: handlers: Feb 7 16:14:49 kefk kernel: [<c02b8db7>] (usb_hcd_irq+0x0/0x67) Feb 7 16:14:49 kefk kernel: Disabling IRQ #18
======================================
If I turn off SATA controller from bios all works just fine, and IRQ 18 is assigned uhci_hcd, eth0
If I try to modprobe ata_piix and libata, I get this on syslog:
======================================
Feb 7 16:19:15 kefk kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Feb 7 16:19:15 kefk kernel: ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 18 Feb 7 16:19:15 kefk kernel: ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 18 Feb 7 16:19:15 kefk kernel: ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f Feb 7 16:19:15 kefk kernel: ata1: dev 0 ATA, max UDMA/133, 320173056 sectors (lba48) Feb 7 16:19:15 kefk kernel: ata1: dev 0 configured for UDMA/133 Feb 7 16:19:15 kefk kernel: scsi1 : ata_piix Feb 7 16:19:15 kefk kernel: ata2: SATA port disabled. ignoring. Feb 7 16:19:15 kefk kernel: ata2: thread exiting Feb 7 16:19:15 kefk kernel: scsi2 : ata_piix Feb 7 16:19:15 kefk kernel: Vendor: ATA Model: Maxtor 6Y160M0 Rev: 0.81 Feb 7 16:19:15 kefk kernel: Type: Direct-Access ANSI SCSI revision: 05 Feb 7 16:19:15 kefk kernel: SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) Feb 7 16:19:15 kefk kernel: SCSI device sda: drive cache: write through Feb 7 16:19:15 kefk scsi.agent[2951]: how to add device type= at
/devices/pci0000:00/0000:00:1f.2/host1/1:0
:0:0 ??
======================================
but modprobe never returns control to the shell ad remains unkillable. I've seen this behaviour also on 2.6.2-rc3-mm1
Of course I can make any needed test to narrow the problem, just let me know.
Details:
2.6.2-mm1 #1 SMP (SMT)
i875p/P4 2.8GHz HT
gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)
SATA drive: Maxtor 6Y160M0
Signature · 4 lines
Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password.