wrong report of frequency in cpuinfo.
With latest 2.6 bk I got that:
ducrot@poupon:~> cat /proc/cpuinfo
processor : 0vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : mobile AMD Athlon(tm) XP-M 2200+
stepping : 1
cpu MHz : 0.000
cache size : 256 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 1777.66
So far, my cpu is at 0.000 MHz ;)
Cheers,
Signature · 4 lines
Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
I cannot reproduce this with any of the speedstep-smi, acpi, p4-clockmod and speedstep-centrino drivers... so I tend to suspect powernow-k7?
Dominik
Quoted 4 lines · Bruno Ducrot
With latest 2.6 bk I got that:
ducrot@poupon:~> cat
/proc/cpuinfo
cpu MHz : 0.000
_______________________________________________
Cpufreq mailing list
[email protected]
http://www.linux.org.uk/mailman/listinfo/cpufreq
Quoted 3 lines · Dominik Brodowski
I cannot reproduce this with any of the speedstep-smi, acpi, p4-clockmod and speedstep-centrino drivers... so I tend to suspect powernow-k7?
Found. That because "pit" is the main clock here.
Well, I should consider to use TSC or ACPI for the system clock some times :)
Signature · 4 lines
Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care.