2.6 kernel boot crashing
Quoted 6 lines · Matthew Garrett
Quoted 2 lines · Thomas E. Vaughan
PnPBIOS: PnP BIOS version 1.0, entry 0xf000:0x6d5a, dseg
0xf000general protection fault: 0000 [#1]
Quoted 6 lines
There have been problems with PnP BIOS support on various motherboards. Try rebuilding the kernel package without PNPBIOS support (you probably don't need it - it's there in order to manage resource allocation for legacy hardware like serial ports, and in most cases the BIOS will happily set those up on its own) and see if that works.
That did the trick. The only config option that matters is
"Plug and Play BIOS support (EXPERIMENTAL)",
which must *not* be selected. I noticed that the top-level
"Plug and Play support"
and also
"ISA Plug and Play support (EXPERIMENTAL)"
can be selected, and the kernel still boots OK. But that PnPBIOS support crashes the kernel hard.
Is it reasonable to request that Herbert Xu, or whoever is in charge of configuring the relevant Debian kernels, turn off the PnPBIOS support until this is fixed upstream. Should someone (like me) file a bug report? If so, then against which package?
Quoted 3 lines
If so, send a copy of the oops and your kernel version to [email protected] and the kernel developers will deal with it.
I'll attach my original report to this message and copy it to linux-kernel.
Quoted 2 lines
Another thing worth trying is to make sure your BIOS is fully up to date.
What's the best way of doing that? I just bought this 2.8-GHz Pentium 4 machine in mid-December from Best Buy, so I don't imagine that the BIOS is particularly old, but I don't know how to tell.
Signature · 1 line
Thomas E. Vaughan (303) 939-6386 Ball Aerospace, Boulder
I have an HP Pavilion A350N that I purchased from Best Buy a couple of months ago. It has a 2.8-GHz Pentium 4 processor "with Hyper-Threading Technology". Anyway, I'm running Debian unstable, and every 2.6 kernel image that I have installed has crashed at boot time. I have not tried compiling my own, but I have tried both the -686 and the -386 packages. Here's what I copied off of the black screen before unplugging the machine from the wall.
----------BEGIN HAND-COPY FROM SCREEN----------
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5f50
PnPBIOS: PnP BIOS version 1.0, entry 0xf000:0x6d5a, dseg 0xf000
general protection fault: 0000 [#1] CPU: 0 EIP: 0098:[<00001f1c>] Not tainted EFLAGS: 00010083
EIP is at 0x1f1c
eax: 000022ec ebx: 0000005d ecx: 00010000 edx: 00000001
esi: f7fa1cd4 edi: 00000015 ebp: f7fa0000 esp: f7fa1efa
ds: 00b0 es: 00b0 ss: 0068
Process swapper (pid: 1, threadinfo=f7fa0000 task=c1b21900)
Stack: 000002ec 22ec1d8e 00000000 8f9d0015 0006c7b3 00010001 1f4c8f3c 0015c7ba
1f4c0000 c7b31f28 00060001 70190606 01060106 007b6e74 0000007b 00a00000
6e3000b0 00a86df6 00000082 000b0000 00010090 00a80000 00b00000 00a00001
Call Trace:
Code: Bad EIP value
<0>Kernel panic: Attempted to kill init!----------END HAND-COPY FROM SCREEN----------
Signature · 1 line
Thomas E. Vaughan (303) 939-6386 Ball Aerospace, Boulder
Quoted 23 lines · Thomas E. Vaughan
Quoted 6 lines · Matthew Garrett
Quoted 2 lines · Thomas E. Vaughan
PnPBIOS: PnP BIOS version 1.0, entry 0xf000:0x6d5a, dseg
0xf000general protection fault: 0000 [#1]Quoted 6 lines
There have been problems with PnP BIOS support on various motherboards. Try rebuilding the kernel package without PNPBIOS support (you probably don't need it - it's there in order to manage resource allocation for legacy hardware like serial ports, and in most cases the BIOS will happily set those up on its own) and see if that works.
That did the trick. The only config option that matters is
"Plug and Play BIOS support (EXPERIMENTAL)",
which must *not* be selected. I noticed that the top-level
Quoted 9 lines
"Plug and Play support"
and also
"ISA Plug and Play support (EXPERIMENTAL)"
can be selected, and the kernel still boots OK. But that PnPBIOS support crashes the kernel hard.
I can confirm that on an Asus P4P800 Deluxe motherboard too for at least kernel 2.6.0 and 2.6.1.
Setting the command line option pnpbios=off is a good fix for people who would like to run a pre-compiled kernel on those mainboards.
Regards,
Bas.