move renamining defintions from drivers/scsi/scsi.h to include/scsi

@@ -34,51 +34,11 @@
 #define FALSE 0
 #endif
 
-#define MAX_SCSI_DEVICE_CODE 14
-extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
-
 #ifdef DEBUG
 #define SCSI_TIMEOUT (5*HZ)
 #else
 #define SCSI_TIMEOUT (2*HZ)
 #endif
-
-/*
- *  Use these to separate status msg and our bytes
- *
- *  These are set by:
- *
- *      status byte = set from target device
- *      msg_byte    = return status from host adapter itself.
- *      host_byte   = set by low-level driver to indicate status.
- *      driver_byte = set by mid-level.
- */
-#define status_byte(result) (((result) >> 1) & 0x1f)
-#define msg_byte(result)    (((result) >> 8) & 0xff)
-#define host_byte(result)   (((result) >> 16) & 0xff)
-#define driver_byte(result) (((result) >> 24) & 0xff)
-#define suggestion(result)  (driver_byte(result) & SUGGEST_MASK)
-
-#define sense_class(sense)  (((sense) >> 4) & 0x7)
-#define sense_error(sense)  ((sense) & 0xf)
-#define sense_valid(sense)  ((sense) & 0x80);
-
-
-#define IDENTIFY_BASE       0x80
-#define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
-		     ((can_disconnect) ?  0x40 : 0) |\
-		     ((lun) & 0x07))
-
-/*
- *  SCSI command sets
- */
-
-#define SCSI_UNKNOWN    0
-#define SCSI_1          1
-#define SCSI_1_CCS      2
-#define SCSI_2          3
-#define SCSI_3          4
-
 
 struct Scsi_Host;
 struct scsi_cmnd;

63 lines not on this page · raw message