Skip to contentSkip to conversation

2.6.3-rc3: USB subsystem wedged when USB keyboard is re-plugged

DISCUSSION Chip Salzenberg 1 participant 1 message Feb 17, 2004

lore
Share & tools
lore
#0 lore raw

I just got a USB keyboard - a pretty darn cool one, actually: an IBM SpaceSaver with both a TrackPoint and a trackpad built-in. And when I plugged it in to my ThinkPad A30 yesterday, it worked great. Then I unplugged it and took my laptop home.

But today when I plugged in the keyboard again, the kernel broke. Quoting dmesg:

usb 2-2: new full speed USB device using address 5 usb 2-2: control timeout on ep0out

And after that timeout, the USB subsystem seems totally stuck. Nothing I do provokes any further response. (Kind of makes me wish I'd built the USB drivers as modules so I could unload and reload them.)

Is this a known issue? I'll be glad to test any patches that might help.

Boot time messages:

drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:00.0
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.1
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 9, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.2
PCI: Sharing IRQ 9 with 0000:00:1f.1
PCI: Sharing IRQ 9 with 0000:02:02.0
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 9, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected

Relevant .config entries:

CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_MOUSE=y

CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y

CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y

Signature · 3 lines
Chip Salzenberg               - a.k.a. -               <[email protected]>
"I wanted to play hopscotch with the impenetrable mystery of existence,
    but he stepped in a wormhole and had to go in early."  // MST3K