Skip to contentSkip to conversation

there's something really wrong here.

U-Boot-Users Josh Fryman 1 participant 2 messages Feb 19, 2004

lore
Share & tools
lore
#0 lore raw

this is on my PXA port in progress. i'm wondering what i've missed in the init sequence. when i ask "bdinfo" what the board config is, i get (literally) random answers. note that env_t, DRAM ->start/size, ethaddr, baudrate, even arch_number (!), etc, all change randomly.

thoughts? what did i forget?

thanks,

-josh

arch_number = 0xA1FE6B30
env_t = 0xE92DD800
boot_params = 0xE2863020

DRAM bank   = 0x00000000
-> start    = 0xE92DD800
-> size     = 0x18C318C3
ethaddr     = F3:9C:FF:CE:28:AC
ip_addr     = 100.230.255.161  
baudrate    = -1577079768 bps

uboot$ bdinfo
arch_number = 0xA1FE6B30
env_t = 0xE92DD800
boot_params = 0xE2863020

DRAM bank   = 0x00000000
-> start    = 0xE92DD800
-> size     = 0xA1FFAC28
ethaddr     = 96:B5:FF:A1:1C:E7
ip_addr     = 100.230.255.161  
baudrate    = -1577079768 bps

uboot$ bdinfo
arch_number = 0xA1FE6B30
env_t = 0xE92DD800
boot_params = 0xE2863020

DRAM bank   = 0x00000000
-> start    = 0xE92DD800
-> size     = 0x18C318C3
ethaddr     = 28:AC:FF:CE:28:E7
ip_addr     = 100.230.255.161  
baudrate    = -1 bps         

uboot$ bdinfo
arch_number = 0xA1FE6B30
env_t = 0xA1FFAC28
boot_params = 0xA1FFAC28

DRAM bank   = 0x00000000
-> start    = 0x4A694A69
-> size     = 0xA1FFAC28
ethaddr     = 28:AC:FF:A1:28:7B
ip_addr     = 100.230.255.161  
baudrate    = -132122593 bps 

uboot$ bdinfo
arch_number = 0xA1FE6B30
env_t = 0xE92DD800
boot_params = 0xA1FFAC28

DRAM bank   = 0x00000000
-> start    = 0xA1FFAC28
-> size     = 0xA1FFAC28
ethaddr     = 28:AC:FF:A1:C3:AC
ip_addr     = 100.230.255.161  
baudrate    = -1577079768 bps

uboot$ bdinfo
arch_number = 0x00000000
env_t = 0xF800F800
boot_params = 0xA1FFAC28

DRAM bank   = 0x00000000
-> start    = 0xE92DD800
-> size     = 0xA1FFAC28
ethaddr     = 28:AC:FF:A1:E0:AC
ip_addr     = 100.230.255.161  
baudrate    = -1577079768 bps

uboot$ bdinfo
arch_number = 0xA1FE6B30
env_t = 0x7BEF7BEF
boot_params = 0xA1FFAC28

DRAM bank   = 0x00000000
-> start    = 0xE92DD800
-> size     = 0xA1FFAC28
ethaddr     = 28:AC:FF:A1:28:AC
ip_addr     = 100.230.255.161  
baudrate    = -1577079768 bps
#1 lore raw

a little more debugging:

all the "gd->bd*" fields are past address 0xa4000000. there's no memory past a3ffffff.

where does that come from? i've told it that there is only one bank at 0xa0000000 of size 0x04000000.

-j