Skip to contentSkip to conversation

2.6.3-mm1 and aic7xxx

DISCUSSION P. Christeas 1 participant 1 message Feb 21, 2004

lore
Share & tools
lore
#0 lore raw

Just noted some nasty behavior at 2.6.3 ( not -mm1) wrt. aic7xxx.

With 2.6.2 I hadn't noticed any trouble (for the last 6 days I've been running it). Now, the box hung twice, while trying to use the scsi cd-recorder (HP m820e) I have. The machine is 'blind' (i.e. no console) so I couldn't get any trace/logs..
First time was while starting 'cdrecord-2.0'. Just when trying to query the device. At the same time the scsi bus was accessing an iomega zip100 drive, reading data.
Second time must have been the device scanning done by k3b (I believe it uses the same scsi libs as cdrecord). Note also that I have an atapi (not ide-scsi) recorder, which had been fixating the disk it had written when the box hung.

Does this relate to the problem you mention ?

I could only recover the following log: (0 4 0 is the scsi M820e recorder)

SCSI error : <0 0 4 0> return code = 0x70002

Feb 21 12:07:19 pfn1 last message repeated 6 times

scsi0:0:4:0: Attempting to queue an ABORT message
CDB: 0x46 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

Dump Card State Begins <<<<<<<<<<<<<<<<<

scsi0: Dumping Card State in Command phase, at SEQADDR 0x166 Card was paused
ACCUM = 0x80, SINDEX = 0xac, DINDEX = 0xc0, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0x84]:(BSYI|CDI) ERROR[0x0] SCSIBUSL[0x8] LASTPHASE[0x80]:(CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x0] SCSIRATE[0x28] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0x0] SSTAT0[0x7]:(DMADONE|SPIORDY|SDONE) SSTAT1[0x2]:(PHASECHG) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION) DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP|DFCACHETH)
STACK: 0x35 0xd3 0x160 0x1a1
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] Pending list:
3 SCB_CONTROL[0x0] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 1 0
Untagged Q(4): 3
DevQ(0:4:0): 0 waiting
DevQ(0:6:0): 0 waiting

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:4:0: Device is active, asserting ATN Recovery code sleeping
Recovery code awake
Timer Expired
aic7xxx_abort returns 0x2003
scsi0:0:4:0: Attempting to queue a TARGET RESET message
CDB: 0x46 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x8 0x0 aic7xxx_dev_reset returns 0x2003
Recovery SCB completes
... hang, I press the win98 key ..

Feb 21 12:09:54 pfn1 syslogd 1.4.1: restart.