Skip to contentSkip to conversation

amd64 Fedora Core (With 2.6 Kernel on a MSI MS-9131 Dual Processor)

DISCUSSION Piet Delaney 1 participant 1 message Mar 10, 2004 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 1 line · Rob Myers

On Tue, 2004-02-24 at 11:08, Gene C. wrote:

.
.
.

Quoted 3 lines

for my server application availability/stability is number one. my current configuration includes FC1 x86_64 test1 with a hand rolled 2.6 kernel.

I'm running FC1 x86_64 and having trouble with the USB mouse in the 2.6.3 kernel. I read that the problem is that RedHat/FC1 uses usb_ohci for the usb mouse driver but 2.6 uses ohci_hcd. I found ehci_hcd.ko and ohci_hcd module objects and installed that without any help. I also tried modifying:

---------------------------------------------------------------------
/etc/modules.conf:
---------------------------------------------------------------------
alias eth0 tg3
alias eth1 tg3

# alias usb-controller usb-ohci
alias usb-controller ohci-hcd
-----------------------------------------------------------------------

I looked at changing /etc/modprobe.conf.dist to adapt to the changed name for the driver; fix wasn't obvious.

On Thursday, February 19, 2004, 'pingswept' at

http://kerneltrap.org/node/view/2413

said he fixed this problem by setting up his .config file to build the kernel with:

{CONFIG_USB_EHCI_HCD, CONFIG_USB_OHCI_HCD, CONFIG_USB_UHCI_HCD} and CONFIG_USB

set to 'y' to compile the modules into the kernel to KISS.

Unfortunately this obvious possibility doesn't seem to be handled will in user space and during startup the stupid module scripts seem to get confused and think the modules aren't available and the mouse fails to work. Insmod reports the problem, looks like mousedev wasn't found, perhaps linking a few more modules into the kernel will do the trick.

Another interesting point is that Fedora on the dual AMD64 MSI MS-9131 (Ver 0.B) hangs if the mouse is in the USB port but runs ok if it's installed after the system is running. The 2.6 kernel also seem to hang if the USB port has a mouse in it at boot time. It hangs just after printing "ohci_hcd 0000:03:00.1: OHCI Host Controler". Looks like a candidate for kgdb.

I was wondering if this might a problem with the Ver 0.B board or the BIOS. The 2.6.3 kernel is also locking up after running for just a few minutes but the 2.4 kernel bundled with Fedora for the AMD-64 runs fine.

-piet

Quoted 12 lines

my vote would be to support x86_64 fully with FC2 and thus kernel 2.6. hopefully when FC2 is released it will be just as stable as FC1 is.

rob.

Signature · 4 lines
fedora-test-list mailing list
[email protected]
To unsubscribe: 
http://www.redhat.com/mailman/listinfo/fedora-test-list
Signature · 1 line
[email protected]