kgdb: rename i386-stub.c to kgdb.c
Hi!
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Pavel
? big.diff
? big.patch
? patchit
Index: core-lite.patch
===================================================================
RCS file: /cvsroot/kgdb/kgdb-2/core-lite.patch,v
retrieving revision 1.3
core-lite.patch +3 -3
@@ -209,8 +209,8 @@ do_basic_setup(); prepare_namespace(); ---- clean.2.5/kernel/kgdbstub.c 2004-02-17 11:38:39.000000000 +0100 -+++ linux-mm/kernel/kgdbstub.c 2004-02-22 21:49:11.000000000 +0100 +--- clean.2.5/kernel/kgdb.c 2004-02-17 11:38:39.000000000 +0100 ++++ linux-mm/kernel/kgdb.c 2004-02-22 21:49:11.000000000 +0100 @@ -0,0 +1,1268 @@ +/* + * This program is free software; you can redistribute it and/or modify it
@@ -1488,7 +1488,7 @@ obj-$(CONFIG_COMPAT) += compat.o obj-$(CONFIG_IKCONFIG) += configs.o obj-$(CONFIG_IKCONFIG_PROC) += configs.o -+obj-$(CONFIG_KGDB) += kgdbstub.o ++obj-$(CONFIG_KGDB) += kgdb.o ifneq ($(CONFIG_IA64),y) # According to Alan Modra <[email protected]>, the -fno-omit-frame-pointer is
Index: i386-lite.patch
===================================================================
RCS file: /cvsroot/kgdb/kgdb-2/i386-lite.patch,v
retrieving revision 1.2
i386-lite.patch +3 -3
@@ -23,8 +23,8 @@ config FRAME_POINTER bool "Compile the kernel with frame pointers" help ---- clean.2.5/arch/i386/kernel/i386-stub.c 2004-02-17 11:39:06.000000000 +0100 -+++ linux-mm/arch/i386/kernel/i386-stub.c 2004-02-22 21:42:55.000000000 +0100 +--- clean.2.5/arch/i386/kernel/kgdb.c 2004-02-17 11:39:06.000000000 +0100 ++++ linux-mm/arch/i386/kernel/kgdb.c 2004-02-22 21:42:55.000000000 +0100 @@ -0,0 +1,373 @@ +/* + *
@@ -407,7 +407,7 @@ obj-$(CONFIG_ACPI_SRAT) += srat.o obj-$(CONFIG_HPET_TIMER) += time_hpet.o obj-$(CONFIG_EFI) += efi.o efi_stub.o -+obj-$(CONFIG_KGDB) += i386-stub.o ++obj-$(CONFIG_KGDB) += kgdb.o EXTRA_AFLAGS := -traditional
Index: x86_64.patch
===================================================================
RCS file: /cvsroot/kgdb/kgdb-2/x86_64.patch,v
retrieving revision 1.2
x86_64.patch +4 -4
@@ -119,7 +119,7 @@ obj-$(CONFIG_DUMMY_IOMMU) += pci-nommu.o pci-dma.o obj-$(CONFIG_MODULES) += module.o -+obj-$(CONFIG_KGDB) += x86_64-stub.o ++obj-$(CONFIG_KGDB) += kgdb.o obj-y += topology.o
@@ -208,10 +208,10 @@ notify_die(DIE_DEBUG, "debug", regs, error_code, 1, SIGTRAP); return; -Index: linux-2.6.3-kgdb/arch/x86_64/kernel/x86_64-stub.c +Index: linux-2.6.3-kgdb/arch/x86_64/kernel/kgdb.c =================================================================== ---- linux-2.6.3-kgdb.orig/arch/x86_64/kernel/x86_64-stub.c 2003-01-30 15:54:37.000000000 +0530 -+++ linux-2.6.3-kgdb/arch/x86_64/kernel/x86_64-stub.c 2004-02-19 14:09:24.234743240 +0530 +--- linux-2.6.3-kgdb.orig/arch/x86_64/kernel/kgdb.c 2003-01-30 15:54:37.000000000 +0530 ++++ linux-2.6.3-kgdb/arch/x86_64/kernel/kgdb.c 2004-02-19 14:09:24.234743240 +0530 @@ -0,0 +1,454 @@ +/* + *
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Quoted 4 lines · Pavel Machek
Hi!
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is arch/$x/kernel/$x-stub.c confusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find kernel/kgdbstub.c, arch/$x/kernel/$x-stub.c more consistent compared to kernel/kgdbstub.c, arch/$x/kernel/kgdb.c
-Amit
Quoted 92 lines
Pavel
? big.diff
? big.patch
? patchit
Index: core-lite.patch
===================================================================
RCS file: /cvsroot/kgdb/kgdb-2/core-lite.patch,v
retrieving revision 1.3
diff -u -u -r1.3 core-lite.patchcore-lite.patch +2
-2@@ -209,8 +209,8 @@ do_basic_setup(); prepare_namespace(); ---- clean.2.5/kernel/kgdbstub.c 2004-02-17 11:38:39.000000000 +0100 -+++ linux-mm/kernel/kgdbstub.c 2004-02-22 21:49:11.000000000 +0100 +--- clean.2.5/kernel/kgdb.c 2004-02-17 11:38:39.000000000 +0100 ++++ linux-mm/kernel/kgdb.c 2004-02-22 21:49:11.000000000 +0100 @@ -0,0 +1,1268 @@ +/* + * This program is free software; you can redistribute it and/or modifyit @@ -1488,7 +1488,7 @@
obj-$(CONFIG_COMPAT) += compat.o
obj-$(CONFIG_IKCONFIG) += configs.o
obj-$(CONFIG_IKCONFIG_PROC) += configs.o
-+obj-$(CONFIG_KGDB) += kgdbstub.o
++obj-$(CONFIG_KGDB) += kgdb.oifneq ($(CONFIG_IA64),y)
# According to Alan Modra <[email protected]>, the
-fno-omit-frame-pointer is Index: i386-lite.patch
===================================================================
RCS file: /cvsroot/kgdb/kgdb-2/i386-lite.patch,v retrieving revision 1.2
diff -u -u -r1.2 i386-lite.patchi386-lite.patch +1
-1@@ -23,8 +23,8 @@ config FRAME_POINTER bool "Compile the kernel with frame pointers" help ---- clean.2.5/arch/i386/kernel/i386-stub.c 2004-02-17 11:39:06.000000000 +0100 -+++ linux-mm/arch/i386/kernel/i386-stub.c 2004-02-2221:42:55.000000000 +0100 +---
clean.2.5/arch/i386/kernel/kgdb.c2004-02-17
11:39:06.000000000 +0100 ++++linux-mm/arch/i386/kernel/kgdb.c2004-02-22
21:42:55.000000000 +0100 @@ -0,0 +1,373 @@
+/*
+ *i386-lite.patch +1
-1@@ -407,7 +407,7 @@ obj-$(CONFIG_ACPI_SRAT) += srat.o obj-$(CONFIG_HPET_TIMER) += time_hpet.o obj-$(CONFIG_EFI) += efi.o efi_stub.o -+obj-$(CONFIG_KGDB) += i386-stub.o ++obj-$(CONFIG_KGDB) += kgdb.o EXTRA_AFLAGS := -traditionalIndex: x86_64.patch
===================================================================
RCS file: /cvsroot/kgdb/kgdb-2/x86_64.patch,v
retrieving revision 1.2
diff -u -u -r1.2 x86_64.patchx86_64.patch +2
-3@@ -119,7 +119,7 @@ obj-$(CONFIG_DUMMY_IOMMU) += pci-nommu.o pci-dma.o obj-$(CONFIG_MODULES) += module.o -+obj-$(CONFIG_KGDB) += x86_64-stub.o ++obj-$(CONFIG_KGDB) += kgdb.o obj-y += topology.o@@ -208,10 +208,10 @@ notify_die(DIE_DEBUG, "debug", regs, error_code, 1, SIGTRAP); return; -Index: linux-2.6.3-kgdb/arch/x86_64/kernel/x86_64-stub.c +Index: linux-2.6.3-kgdb/arch/x86_64/kernel/kgdb.c =================================================================== ---- linux-2.6.3-kgdb.orig/arch/x86_64/kernel/x86_64-stub.c 2003-01-3015:54:37.000000000 +0530 -+++
linux-2.6.3-kgdb/arch/x86_64/kernel/x86_64-stub.c2004-02-19
14:09:24.234743240 +0530 +---linux-2.6.3-kgdb.orig/arch/x86_64/kernel/kgdb.c2003-01-30
15:54:37.000000000 +0530 ++++linux-2.6.3-kgdb/arch/x86_64/kernel/kgdb.c2004-02-19 14:09:24.234743240
+0530 @@ -0,0 +1,454 @@
+/*
+ *
Hi!
Quoted 5 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.
Well, looking at i386-stub.c, how do you know it is kgdb-related?
Quoted 5 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.c
I actually made it kernel/kgdb.c and arch/*/kernel/kgdb.c. I believe there's no point where one could be confused....
Pavel
Signature · 2 lines
Horseback riding is like software... ...vgf orggre jura vgf serr.
Quoted 10 lines · Pavel Machek
Hi!
Quoted 6 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.Well, looking at
i386-stub.c, how do you know it is kgdb-related?
hmm... I see what you meant by "confusing". The confusing part is file name not representing contents. Agreed.
Quoted 7 lines
Quoted 5 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.cI actually made it
kernel/kgdb.candarch/*/kernel/kgdb.c. I believe
OOPS I didn't notice that.
Quoted 1 line
there's no point where one could be confused....
kernel/kgdb.c and arch/*kernel/kgdb.c have same file name appearing in two places :-( mainline kernel also does it (e.g. ptrace.c)
Let's go with the convention followed in mainline kernel. OK from me.
-Amit
Hi!
Quoted 22 lines
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.Well, looking at
i386-stub.c, how do you know it is kgdb-related?hmm... I see what you meant by "confusing". The confusing part is file name not representing contents. Agreed.
Quoted 7 lines
Quoted 5 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.cI actually made it
kernel/kgdb.candarch/*/kernel/kgdb.c. I believeOOPS I didn't notice that.
Quoted 7 lines
Quoted 1 line
there's no point where one could be confused....
kernel/kgdb.candarch/*kernel/kgdb.chave same file name appearing in two places :-( mainline kernel also does it (e.g.ptrace.c)Let's go with the convention followed in mainline kernel. OK from me.
Now you confused me :-). I commited rename of arch/*/kernel/*-stub.c into arch/*/kernel/kgdb.c.
Should I commit rename of kernel/kgdbstub.c into kernel/kgdb.c, too?
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Quoted 29 lines · Pavel Machek
Hi!
Quoted 27 lines
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.Well, looking at
i386-stub.c, how do you know it is kgdb-related?hmm... I see what you meant by "confusing". The confusing part is file name not representing contents. Agreed.
Quoted 7 lines
Quoted 5 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.cI actually made it
kernel/kgdb.candarch/*/kernel/kgdb.c. I believeOOPS I didn't notice that.
Quoted 1 line
there's no point where one could be confused....
kernel/kgdb.candarch/*kernel/kgdb.chave same file name appearing in two places :-( mainline kernel also does it (e.g.ptrace.c)
Quoted 7 lines
Quoted 2 lines
Let's go with the convention followed in mainline kernel. OK from me.
Now you confused me :-). I commited rename of
arch/*/kernel/*-stub.cintoarch/*/kernel/kgdb.c.Should I commit rename of
kernel/kgdbstub.cintokernel/kgdb.c, too?
Yes, please do.
-Amit
Quoted 13 lines · Pavel Machek
Hi!
Quoted 4 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.Well, looking at
i386-stub.c, how do you know it is kgdb-related?
Quoted 7 lines
Quoted 3 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.cI actually made it
kernel/kgdb.candarch/*/kernel/kgdb.c. I believe there's no point where one could be confused....
gdb itself gets confused with this. Try, for example, time.c which, on the x86, is in both arch and common code. I use emacs with kgdb and it gets confused when I point at a location in the source and tell it to set a break point.
Please, lets have only one of each name.
Signature · 3 lines
George Anzinger [email protected] High-res-timers: http://sourceforge.net/projects/high-res-timers/ Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml
Quoted 25 lines · George Anzinger
Quoted 17 lines · Pavel Machek
Hi!
Quoted 5 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.Well, looking at
i386-stub.c, how do you know it is kgdb-related?Quoted 3 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
Quoted 6 lines
Quoted 2 lines
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.cI actually made it
kernel/kgdb.candarch/*/kernel/kgdb.c. I believe there's no point where one could be confused....
Quoted 6 lines
gdb itself gets confused with this. Try, for example,
time.cwhich, on the x86, is in both arch and common code. I use emacs with kgdb and it gets confused when I point at a location in the source and tell it to set a break point.Please, lets have only one of each name.
We can't. We've had various things (most notably MODVERSIONS prior to 2.6) which are unhappy with that, and in the end, the problem ends up being fixed elsewhere. In fact, this should be able to as well. Using your time.c example:
(gdb) break arch/i386/kernel/time.c:set_rtc_mmss
Breakpoint 3 at 0xc010ee90: file arch/i386/kernel/time.c, line 174. (gdb) break kernel/time.c:sys_time
Breakpoint 4 at 0xc011f0cc: file time.h, line 301.
So shouldn't it be a matter of somehow just not having a time.c reference as well in the debug data?
Signature · 2 lines
Tom Rini http://gate.crashing.org/~trini/
Quoted 40 lines · Tom Rini
Quoted 22 lines · George Anzinger
Quoted 20 lines · Pavel Machek
Hi!
Quoted 4 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.Well, looking at
i386-stub.c, how do you know it is kgdb-related?Quoted 3 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.cQuoted 6 lines
Quoted 2 lines
I actually made it
kernel/kgdb.candarch/*/kernel/kgdb.c. I believe there's no point where one could be confused....gdb itself gets confused with this. Try, for example,
time.cwhich, on the x86, is in both arch and common code. I use emacs with kgdb and it gets confused when I point at a location in the source and tell it to set a break point.Please, lets have only one of each name.
We can't. We've had various things (most notably MODVERSIONS prior to 2.6) which are unhappy with that, and in the end, the problem ends up being fixed elsewhere. In fact, this should be able to as well. Using your
time.cexample:
(gdb) break arch/i386/kernel/time.c:set_rtc_mmss
Breakpoint 3 at0xc010ee90: filearch/i386/kernel/time.c, line 174. (gdb) break kernel/time.c:sys_time Breakpoint 4 at0xc011f0cc: filetime.h, line 301.
Quoted 2 lines
So shouldn't it be a matter of somehow just not having a
time.creference as well in the debug data?
No it is related to the point and grunt option in emacs:
I would guess it is a problem in the emacs interface where one points at a location in the code window and enters a command to set a break point ( I think it is "^x " (control X space)). It would appear that emacs then only sends the file name to gdb rather than the full path.
This is not a show stopping problem, only confusing. Once gdb figures out the right source, all is well. I usually do it by setting a break point at the function by name, thus avoiding the point and grunt thing.
Quoted 1 line
Signature · 3 lines
George Anzinger [email protected] High-res-timers: http://sourceforge.net/projects/high-res-timers/ Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml
Hi!
Quoted 18 lines
Quoted 18 lines
Quoted 5 lines
Quoted 2 lines
kgdb uses really confusing names for arch-dependend parts. This fixes it. Okay to commit?
Why is
arch/$x/kernel/$x-stub.cconfusing? The name $x-stub.c is indicative of architecture dependent code in it. Err, well so is the path.Well, looking at
i386-stub.c, how do you know it is kgdb-related?Quoted 5 lines
PPC and sparc stubs in present vanilla kernel use this naming convention. That's why I adopted it.
I find
kernel/kgdbstub.c,arch/$x/kernel/$x-stub.cmore consistent compared tokernel/kgdbstub.c,arch/$x/kernel/kgdb.c
Quoted 7 lines
Quoted 2 lines
I actually made it
kernel/kgdb.candarch/*/kernel/kgdb.c. I believe there's no point where one could be confused....gdb itself gets confused with this. Try, for example,
time.cwhich, on the x86, is in both arch and common code. I use emacs with kgdb and it gets confused when I point at a location in the source and tell it to set a break point.
That's a gdb bug, surely?
My gdb seems to work okay:
(gdb) b time.c:3
Breakpoint 1 at 0xc01e8b30: file fs/ntfs/time.c, line 3. (gdb) b kernel/time.c:3
Breakpoint 2 at 0xc0122540: file kernel/time.c, line 3. (gdb)
....that seems more or less right.
Quoted 1 line
Please, lets have only one of each name.
You can't have that, anyway.. Filenames are already repeating.
Well, I already commited it. It is possible to revert last change, and we'll get kernel/kgdbstub.c but arch/*/kernel/kgdb.c.
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Quoted 8 lines · George Anzinger
I would guess it is a problem in the emacs interface where one points at a location in the code window and enters a command to set a break point ( I think it is "^x " (control X space)). It would appear that emacs then only sends the file name to gdb rather than the full path.
This is not a show stopping problem, only confusing. Once gdb figures out the right source, all is well. I usually do it by setting a break point at the function by name, thus avoiding the point and grunt thing.
This is a known problem in the emacs interfaces; it will be fixed, but I have no idea when the fixed version will be available :)
Signature · 2 lines
Daniel Jacobowitz MontaVista Software Debian GNU/Linux Developer
Quoted 10 lines · Daniel Jacobowitz
Quoted 3 lines · George Anzinger
I would guess it is a problem in the emacs interface where one points at a location in the code window and enters a command to set a break point ( I think it is "^x " (control X space)). It would appear that emacs then only sends the file name to gdb rather than the full path.
This is not a show stopping problem, only confusing. Once gdb figures out the right source, all is well. I usually do it by setting a break point at the function by name, thus avoiding the point and grunt thing.
This is a known problem in the emacs interfaces; it will be fixed, but I have no idea when the fixed version will be available :)
I agree AND I have bigger fish to fry with emacs so....
Signature · 3 lines
George Anzinger [email protected] High-res-timers: http://sourceforge.net/projects/high-res-timers/ Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml