Skip to contentSkip to conversation

Sony AIT ATAPI in 2.4.24

DISCUSSION Antony Gelberg 1 participant 1 message Mar 2, 2004

lore
Share & tools
lore
#0 lore raw

Hi all,

We have a server into which we've put a Sony AITi130a/S tape drive. Recompiled the kernel (2.4.24) to include ATAPI TAPE. On reboot, the logs indicate recognition of the drive:
hdd: ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~AÀ~A, ATAPI TAPE drive
hdd: attached ide-tape driver.
ide-tape: ht0: I/O error, pc = 12, key = 0, asc = c0, ascq = 81
ide-tape: ht0: can't get INQUIRY results
ide-tape: ht0: I/O error, pc = 1a, key = 0, asc = c0, ascq = 81
ide-tape: Can't get tape parameters - assuming some default values
ide-tape: ht0: I/O error, pc = 1a, key = 0, asc = c0, ascq = 81
ide-tape: Can't get block descriptor
ide-tape: hdd <-> ht0: 450KBps, 6*26kB buffer, 4394kB pipeline, 110ms tDSC

With no tape in the drive, the above doesn't happen - the drive is not detected as far as I can see.

Subequent attempts to use the drive result in error messages like:

Mar  2 15:07:38 server kernel: hdd: ATAPI reset complete
Mar  2 15:07:38 server kernel: ide-tape: ht0: I/O error, pc =  1, key =
0, asc = c0, ascq = 81
Mar  2 15:09:38 server kernel: ide-tape: ht0: DSC timeout

I was hoping that someone who knows the ide-tape stuff is around, and could help me with what those hex values and other errors mean, and even whether there is a chance that this drive is not supported. I'm going to upgrade to 2.6.3, but need to wait for an outage.

Please CC me as I'm not subscribed.

Antony