idle Athlon with IOAPIC is 10C warmer since 2.6.3-bk1
Hi,
a few days ago I noticed that my Athlon 3000+ was relatively hot (49C) although it was completely idle. At that time I was running 2.6.3-mm3 with ACPI and IOAPIC-support enabled.
As I tried 2.6.3, the idle temperature was at normal 39C. So I did do some binary search with the -bk patches and found the patch that causes the high idle temperature. It is [email protected] aka 8259-timer-ack-fix.patch.
A patch to revert that ChangeSet for 2.6.4-rc1-mm2 is attached.
Best regards
Thomas Schlichter
P.S.: The high idle temperature only shows if the IOAPIC is used. P.P.S: I already sent this mail last saturday, but as it seems to have never reached LKML I send it again. I'm sorry if you got it twice!
arch/i386/kernel/io_apic.c renamed from arch/i386/kernel/io_apic.c.orig +4 -16
@@ -2157,10 +2157,6 @@ static inline void check_timer(void) {int pin1, pin2;int vector; -unsigned int ver; - - ver =apic_read (APIC_LVR ); - ver =GET_APIC_VERSION (ver);/* * get/set the timer IRQ vector:
@@ -2174,17 +2170,11 @@ static inline void check_timer(void)* mode for the 8259A whenever interrupts are routed * through I/O APICs. Also IRQ0 has to be enabled in * the 8259A which implies the virtual wire has to be -* disabled in the local APIC. Finally timer interrupts -* need to be acknowledged manually in the 8259A for -* do_slow_timeoffset() and for the i82489DX when using -* the NMI watchdog. +* disabled in the local APIC. */ apic_write_around (APIC_LVT0 ,APIC_LVT_MASKED |APIC_DM_EXTINT );init_8259A (1 ); -if (nmi_watchdog ==NMI_IO_APIC && !APIC_INTEGRATED (ver)) - timer_ack =1 ; -else - timer_ack = !cpu_has_tsc; + timer_ack =1 ;enable_8259A_irq (0 ); pin1 =find_isa_irq_pin (0 , mp_INT);
@@ -2202,8 +2192,7 @@ static inline void check_timer(void)disable_8259A_irq (0 );setup_nmi ();enable_8259A_irq (0 ); -if (check_nmi_watchdog () <0 ); - timer_ack = !cpu_has_tsc; +check_nmi_watchdog (); }return ; }
@@ -2226,8 +2215,7 @@ static inline void check_timer(void)add_pin_to_irq (0 ,0 , pin2);if (nmi_watchdog ==NMI_IO_APIC ) {setup_nmi (); -if (check_nmi_watchdog () <0 ); - timer_ack = !cpu_has_tsc; +check_nmi_watchdog (); }return ; }