modprobe qla2300 doesn't complete

BUG Grant Grundler 3 participants 12 messages Mar 5, 2004 – Dec 27, 2004

Subsystems (2)

SCSI QLogic QLA2XXX FC-SCSI driver

lore

Share & tools

lore

Grant Grundler

author

2004-03-05 04:18 UTC #0 lore raw

Hi all,
qla2300 driver in 2.6.4-rc1 is showing a robustness problem. When modprobe'ing the driver, it never completes initialization. It continually prints the "Topology - (F_Port), Host Loop address 0xffff" messages. I know I have a bad disk or something connected to the FC switch. And when I power off one of the disk arrays (no raid controllers, just JBOD) the problem goes away...but I expect better behavior from qla2300 driver.

I can make the system remotely available if someone wants to debug this some more.

thanks,
grant

gsyprf3:~# modprobe qla2300
QLogic Fibre Channel HBA Driver (a000000200313c28)
PCI: Found IRQ 66 for device 0000:80:01.0
IOSAPIC: vector 66 -> CPU 0x0100, enabled
qla2300 0000:80:01.0: Found an ISP2312, irq 66, iobase 0xc0000000c8041000
qla2300 0000:80:01.0: Configuring PCI space...
qla2300 0000:80:01.0: Configure NVRAM parameters...
qla2300 0000:80:01.0: Verifying loaded RISC code...
qla2300 0000:80:01.0: LIP reset occured (f7f7).
qla2300 0000:80:01.0: Waiting for LIP to complete...
qla2300 0000:80:01.0: LOOP UP detected (2 Gbps).
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
...

Andrew Vasquez

2004-03-05 07:38 UTC #1 lore raw

Quoted 5 lines · Grant Grundler

qla2300 driver in 2.6.4-rc1 is showing a robustness problem. When modprobe'ing the driver, it never completes initialization. It continually prints the "Topology - (F_Port), Host Loop address 0xffff" messages.

I've seen this behaviour before, I thought we fixed this :(

Quoted 5 lines

I know I have a bad disk or something connected to the FC switch. And when I power off one of the disk arrays (no raid controllers, just JBOD) the problem goes away...but I expect better behavior from qla2300 driver.

Yes, me too...

Quoted 3 lines

I can make the system remotely available if someone wants to debug this some more.

That may be useful. In the interim, could you just enable a couple of debug settings in the driver and rerun against the volitile fabric (just a short period, say 30 seconds), then send the /var/log/messages file. I believe I know the problem, I just need to be sure the stimulus coming from the fabric is what I would expect.

o Set DEBUG_QLA2100 to 1 in qla_settings.h

o Define QL_DEBUG_LEVEL_2 in qla_dbg.h.

Regards,
Andrew Vasquez
QLogic Corporation

Grant Grundler

author

2004-03-05 15:57 UTC #2 lore raw

Quoted 1 line · Andrew Vasquez

I've seen this behaviour before, I thought we fixed this :(

oh - bummer. :^(

Quoted 4 lines

Quoted 2 lines
I can make the system remotely available if someone wants to debug this some more.
That may be useful.

Yes. :^)
(I've debugged a fair number of issues like this in the past)

Andrew, I need preferred login, public ssh key (eg id_rsa.pub), and telephone number where I reach in case of urgent admin issues. I can then setup an account and explain how to access.

Quoted 2 lines

In the interim, could you just enable a couple of
debug settings in the driver and rerun against the volitile fabric

yes - np.

Quoted 7 lines

(just a short period, say 30 seconds), then send the /var/log/messages file. I believe I know the problem, I just need to be sure the stimulus coming from the fabric is what I would expect.
o Set DEBUG_QLA2100 to 1 in qla_settings.h
o Define QL_DEBUG_LEVEL_2 in qla_dbg.h.

I'll include output in my next reply.

thanks,
grant

Quoted 4 lines

Regards,
Andrew Vasquez
QLogic Corporation

Grant Grundler

author

2004-03-05 17:21 UTC #3 lore raw

In reply to Andrew Vasquez

On Thu, Mar 04, 2004 at 11:17:21PM -0800, Andrew Vasquez wrote:
...

Quoted 4 lines

In the interim, could you just enable a couple of
debug settings in the driver and rerun against the volitile fabric (just a short period, say 30 seconds), then send the /var/log/messages file.

...

appended. I've trimmed it down...full log is at:
ftp://gsyprf10.external.hp.com/kernels/rx2600/gsyprf3.log_qla2300_F_Port

BTW, this is running on an HP rx2600 (ia64) and both qla2312 ports are connected to one HP FC16 (IIRC) switch. Three DS2405 disk enclosures are also connected to the switch. IIRC, only two are powered up. Other HBAs/hosts are connected to the switch but I'm not actively using any of them.

thanks,
grant

grundler@gsyprf3:/usr/src/linux-ia64-2.5$ uname -a
Linux gsyprf3.external.hp.com 2.6.4-rc1 #1 SMP Thu Mar 4 13:14:20 PST 2004 ia64 GNU/Linux
and than ran "modprobe qla2300"

...

Mar  5 08:03:16 gsyprf3 kernel: QLogic Fibre Channel HBA Driver (a000000200324d30)
Mar  5 08:03:16 gsyprf3 kernel: PCI: Found IRQ 66 for device 0000:80:01.0
Mar  5 08:03:16 gsyprf3 kernel: IOSAPIC: vector 66 -> CPU 0x0100, enabled
Mar  5 08:03:16 gsyprf3 kernel: qla2300 0000:80:01.0: Found an ISP2312, irq 66, iobase 0xc0000000c8041000
Mar  5 08:03:16 gsyprf3 kernel: qla2300 0000:80:01.0: Configuring PCI space...
Mar  5 08:03:16 gsyprf3 kernel: qla2300 0000:80:01.0: Configure NVRAM parameters...
Mar  5 08:03:16 gsyprf3 kernel: qla2300 0000:80:01.0: Verifying loaded RISC code...
Mar  5 08:03:16 gsyprf3 kernel: scsi(4): **** Load RISC code ****
Mar  5 08:03:16 gsyprf3 kernel: scsi(4): Verifying Checksum of loaded RISC code.
Mar  5 08:03:16 gsyprf3 kernel: scsi(4): Checksum OK, start firmware.
Mar  5 08:03:16 gsyprf3 kernel: scsi(4): Issue init firmware.
Mar  5 08:03:16 gsyprf3 kernel: scsi(4): Asynchronous LIP RESET (f7f7).
Mar  5 08:03:16 gsyprf3 kernel: qla2300 0000:80:01.0: LIP reset occured (f7f7).
Mar  5 08:03:16 gsyprf3 kernel: qla2300 0000:80:01.0: Waiting for LIP to complete...
Mar  5 08:03:16 gsyprf3 kernel: scsi(4): Asynchronous P2P MODE received.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): Asynchronous PORT UPDATE.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): Port database changed 0000 0004.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): Asynchronous LOOP UP (2 Gbps).
Mar  5 08:03:17 gsyprf3 kernel: qla2300 0000:80:01.0: LOOP UP detected (2 Gbps).
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): Asynchronous PORT UPDATE ignored.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): F/W Ready - OK 
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): fw_state=3 curr time=102690bd1.
Mar  5 08:03:17 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80040
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): RSCN queue entry[0] = [00/000000].
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): RFT_ID exiting normally.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): RFF_ID exiting normally.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): RNN_ID exiting normally.
Mar  5 08:03:17 gsyprf3 kernel: scsi(4): RSNN_NN exiting normally.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:03:18 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:03:19 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:03:20 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:03:20 gsyprf3 kernel: scsi(4): device wrap (0b1f00)
Mar  5 08:03:20 gsyprf3 kernel: scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
Mar  5 08:03:21 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:21 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:22 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:22 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:24 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:24 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:25 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:25 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:40 gsyprf3 kernel: qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
Mar  5 08:03:40 gsyprf3 kernel: qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:03:40 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): RSCN queue entry[0] = [01/0b1000].
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:03:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): device wrap (0b1f00)
Mar  5 08:03:41 gsyprf3 kernel: scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
Mar  5 08:03:43 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:43 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:44 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:44 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:00 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:00 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:01 gsyprf3 kernel: qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
Mar  5 08:04:01 gsyprf3 kernel: qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:04:01 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): RSCN queue entry[4] = [01/0b1000].
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:04:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:04:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): device wrap (0b1f00)
Mar  5 08:04:03 gsyprf3 kernel: scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
Mar  5 08:04:06 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:06 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:08 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:08 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:10 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:10 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:11 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:11 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:13 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:13 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:15 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:15 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:17 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:17 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:21 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:21 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:23 gsyprf3 kernel: qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
Mar  5 08:04:23 gsyprf3 kernel: qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:04:23 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): RSCN queue entry[8] = [01/0b1000].
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:04:23 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:04:24 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): device wrap (0b1f00)
Mar  5 08:04:25 gsyprf3 kernel: scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
Mar  5 08:04:27 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:27 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:27 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:27 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:29 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:29 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:31 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:31 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:33 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:33 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:34 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:34 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:36 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:36 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:38 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:38 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:41 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:41 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:45 gsyprf3 kernel: qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
Mar  5 08:04:45 gsyprf3 kernel: qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:04:45 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): RSCN queue entry[16] = [01/0b1000].
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:04:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:04:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:04:47 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): RSCN queue entry[25] = [01/0b1000].
Mar  5 08:04:47 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:04:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:04:49 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:04:50 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): RSCN queue entry[26] = [01/0b1000].
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:04:50 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:04:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:04:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:04:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:04:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:04:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:04:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:04:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:04:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:04:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:04:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:04:53 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:04:53 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:04:53 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:04:53 gsyprf3 kernel: scsi(4): RSCN queue entry[27] = [01/0b1000].
Mar  5 08:04:53 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:04:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:04:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:04:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:04:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:04:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:04:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:04:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:04:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:04:56 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): RSCN queue entry[28] = [01/0b1000].
Mar  5 08:04:56 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:04:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:04:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:04:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:04:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:04:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:04:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:04:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:04:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:00 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): RSCN queue entry[30] = [01/0b1000].
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:02 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:03 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:03 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:03 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:03 gsyprf3 kernel: scsi(4): RSCN queue entry[0] = [01/0b1000].
Mar  5 08:05:03 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:06 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): RSCN queue entry[1] = [01/0b1000].
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): device wrap (0b1f00)
Mar  5 08:05:08 gsyprf3 kernel: scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
Mar  5 08:05:10 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:10 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:12 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:12 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:13 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:13 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:15 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:15 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:17 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:17 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:19 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:19 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:21 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:21 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:23 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:23 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:25 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:25 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:28 gsyprf3 kernel: qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
Mar  5 08:05:28 gsyprf3 kernel: qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
Mar  5 08:05:28 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:28 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:28 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:28 gsyprf3 kernel: scsi(4): RSCN queue entry[2] = [01/0b1000].
Mar  5 08:05:28 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:29 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:30 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): RSCN queue entry[11] = [01/0b1000].
Mar  5 08:05:30 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:31 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:31 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:32 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:33 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:33 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:33 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:34 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): RSCN queue entry[12] = [01/0b1000].
Mar  5 08:05:34 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:36 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:36 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:38 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:39 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:40 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:40 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:40 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:40 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:40 gsyprf3 kernel: scsi(4): RSCN queue entry[14] = [01/0b1000].
Mar  5 08:05:40 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:41 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:42 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:42 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:42 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:42 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:42 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:42 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:42 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:43 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): RSCN queue entry[17] = [01/0b1000].
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:43 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:44 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:44 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:44 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:44 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:44 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:44 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:44 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:45 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:46 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): RSCN queue entry[19] = [01/0b1000].
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:46 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:47 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:47 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:47 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:48 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:49 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): RSCN queue entry[20] = [01/0b1000].
Mar  5 08:05:49 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:50 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:50 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:51 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:52 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:53 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): RSCN queue entry[22] = [01/0b1000].
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:53 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:54 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:55 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:05:56 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:56 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:05:56 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:05:57 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): RSCN queue entry[24] = [01/0b1000].
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:05:57 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:05:58 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:05:58 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:05:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:05:58 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:05:59 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:06:00 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:06:00 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:06:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:06:00 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:06:01 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): RSCN queue entry[25] = [01/0b1000].
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:06:01 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:06:03 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:06:04 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:06:05 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:06:06 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): Configure loop -- dpc flags =0x80
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): RSCN queue entry[27] = [01/0b1000].
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): device_resync: rscn overflow.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
Mar  5 08:06:06 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
Mar  5 08:06:07 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
Mar  5 08:06:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
Mar  5 08:06:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
Mar  5 08:06:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
Mar  5 08:06:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
Mar  5 08:06:08 gsyprf3 kernel: scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
Mar  5 08:06:08 gsyprf3 kernel: scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
Mar  5 08:06:08 gsyprf3 kernel: qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff

...

Andrew Vasquez

2004-03-09 17:02 UTC #4 lore raw

Quoted 8 lines · Grant Grundler

On Thu, Mar 04, 2004 at 11:17:21PM -0800, Andrew Vasquez wrote:
...
Quoted 4 lines
In the interim, could you just enable a couple of
debug settings in the driver and rerun against the volitile fabric (just a short period, say 30 seconds), then send the /var/log/messages file.
...

Quoted 8 lines

Mar  5 08:03:21 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:21 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:22 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:22 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:24 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:24 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.
Mar  5 08:03:25 gsyprf3 kernel: scsi(4): Asynchronous RSCR UPDATE.
Mar  5 08:03:25 gsyprf3 kernel: scsi(4): RSCN database changed -- 010b 1000.

Ok, the driver is being flodded with RSCNs from the switch due to the JBOD hanging off of 0b10xx.

There are three places where the driver could fall into stuck case of handling RSCNs. The attached patch introduces behaviour consistent with what we have for several of our other platform drivers. The end result is the will be 1) The driver will not hang during init/post-init due to the stream of RSCNs. 2) The driver after init, will *not* present any devices to the mid-layer due to the volatility within the fabric.

This flodding behaviour also opens-up different handling qualities of the Asynchronous RSCN handling (performed by the driver post-init). I need to set up something locally which simulates this behaviour to test out that logic, but, in the interim, this patch should be sufficient.

Thanks for you patience.

Andrew Vasquez

===== drivers/scsi/qla2xxx/qla_init.c 1.6 vs edited =====

drivers/scsi/qla2xxx/qla_init.c +16 -3

@@ -105,6 +105,7 @@
 	uint8_t	isp_init = 0;
 	uint8_t	restart_risc = 0;
 	uint8_t	retry;
+	uint32_t wait_time;
 
 	/* Clear adapter flags. */
 	ha->flags.online = FALSE;

@@ -184,9 +185,10 @@
 				clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
 
 				/*
-				 * Go setup flash database devices with proper
-				 * Loop ID's.
+				 * Wait at most MAX_TARGET RSCNs for a stable
+				 * link.
 				 */
+				wait_time = 256;
 				do {
 					clear_bit(LOOP_RESYNC_NEEDED,
 					    &ha->dpc_flags);

@@ -209,8 +211,10 @@
 					    LOOP_DOWN && retry--) {
 						goto check_fw_ready_again;
 					}
+					wait_time--;
 				} while (!atomic_read(&ha->loop_down_timer) &&
 				    retry &&
+				    wait_time &&
 				    (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)));
 			}

@@ -3054,6 +3058,7 @@
 qla2x00_loop_resync(scsi_qla_host_t *ha) 
 {
 	int   rval;
+	uint32_t wait_time;
 
 	rval = QLA_SUCCESS;

@@ -3062,6 +3067,8 @@
 	clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
 	if (ha->flags.online) {
 		if (!(rval = qla2x00_fw_ready(ha))) {
+			/* Wait at most MAX_TARGET RSCNs for a stable link. */
+			wait_time = 256;
 			do {
 				/* v2.19.05b6 */
 				atomic_set(&ha->loop_state, LOOP_UPDATE);

@@ -3076,9 +3083,10 @@
 				clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
 
 				qla2x00_configure_loop(ha);
-
+				wait_time--;
 			} while (!atomic_read(&ha->loop_down_timer) &&
 				!(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) &&
+				wait_time &&
 				(test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)));
 		}
 		qla2x00_restart_queues(ha,TRUE);

@@ -4197,6 +4205,7 @@
 	uint8_t		status = 0;
 	device_reg_t	*reg;
 	unsigned long	flags = 0;
+	uint32_t wait_time;
 
 	/* If firmware needs to be loaded */
 	if (qla2x00_isp_firmware(ha)) {

@@ -4240,11 +4249,15 @@
 					__func__,
 					status);)
 			ha->flags.online = TRUE;
+			/* Wait at most MAX_TARGET RSCNs for a stable link. */
+			wait_time = 256;
 			do {
 				clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
 				qla2x00_configure_loop(ha);
+				wait_time--;
 			} while (!atomic_read(&ha->loop_down_timer) &&
 				!(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) &&
+				wait_time &&
 				(test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)));
 		}

Grant Grundler

author

2004-03-10 22:12 UTC #5 lore raw

Quoted 10 lines · Andrew Vasquez

Ok, the driver is being flodded with RSCNs from the switch due to the JBOD hanging off of 0b10xx.
There are three places where the driver could fall into stuck case of handling RSCNs. The attached patch introduces behaviour consistent with what we have for several of our other platform drivers. The end result is the will be 1) The driver will not hang during init/post-init due to the stream of RSCNs. 2) The driver after init, will *not* present any devices to the mid-layer due to the volatility within the fabric.

Still doesn't seem to make forward progress...console output appended. (cut/pasted...white space is probably mangled)

And now the ssh sessions are "hung" (un responsive). So I can't reboot the box to 'clear' the error. We must be pretty close to a fix. :^)

thanks,
grant

gsyprf3:/usr/src/linux-ia64-2.5# sync
gsyprf3:/usr/src/linux-ia64-2.5# modprobe qla2300
QLogic Fibre Channel HBA Driver (a000000200324d90)
PCI: Found IRQ 66 for device 0000:80:01.0
IOSAPIC: vector 66 -> CPU 0x0100, enabled
qla2300 0000:80:01.0: Found an ISP2312, irq 66, iobase 0xc0000000c8041000
qla2300 0000:80:01.0: Configuring PCI space...
qla2300 0000:80:01.0: Configure NVRAM parameters...
qla2300 0000:80:01.0: Verifying loaded RISC code...
scsi(4): **** Load RISC code ****
scsi(4): Verifying Checksum of loaded RISC code.
scsi(4): Checksum OK, start firmware.
scsi(4): Issue init firmware.
scsi(4): Asynchronous LIP RESET (f7f7).
qla2300 0000:80:01.0: LIP reset occured (f7f7).
qla2300 0000:80:01.0: Waiting for LIP to complete...
scsi(4): Asynchronous P2P MODE received.
scsi(4): Asynchronous PORT UPDATE.
scsi(4): Port database changed 0000 0004.
scsi(4): Asynchronous LOOP UP (2 Gbps).
qla2300 0000:80:01.0: LOOP UP detected (2 Gbps).
scsi(4): Asynchronous PORT UPDATE ignored.
scsi(4): F/W Ready - OK 
scsi(4): fw_state=3 curr time=104c6bb1f.
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80040
scsi(4): RSCN queue entry[0] = [00/000000].
scsi(4): device_resync: rscn overflow.
scsi(4): RFT_ID exiting normally.
scsi(4): RFF_ID exiting normally.
scsi(4): RNN_ID exiting normally.
scsi(4): RSNN_NN exiting normally.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): device wrap (0b1f00)
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[0] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): device wrap (0b1f00)
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[3] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): device wrap (0b1f00)
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[7] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): device wrap (0b1f00)
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[14] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[23] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[24] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): device wrap (0b1f00)
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
qla2x00_mailbox_command(4): **** FAILED. mbx0=4005, mbx1=4, mbx2=7, cmd=6f ****
qla2x00_login_fabric(4): failed=0 mb[0]=4005 mb[1]=4 mb[2]=7.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[26] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): GID_PT entry - nn 50060b00001cab39 pn 50060b00001e386f portid=0b10ce.
scsi(4): GID_PT entry - nn 2000002037e35bb8 pn 2200002037e35bb8 portid=0b10d3.
scsi(4): GID_PT entry - nn 2000002037e329dd pn 2200002037e329dd portid=0b10d4.
scsi(4): GID_PT entry - nn 2000002037e33bd9 pn 2200002037e33bd9 portid=0b10d5.
scsi(4): GID_PT entry - nn 20000004cfcf03a6 pn 22000004cfcf03a6 portid=0b10d6.
scsi(4): GID_PT entry - nn 2000002037e33667 pn 2200002037e33667 portid=0b10d9.
scsi(4): GID_PT entry - nn 2000002037d943bb pn 2200002037d943bb portid=0b10e1.
scsi(4): GID_PT entry - nn 20000004cf87f539 pn 22000004cf87f539 portid=0b10e4.
scsi(4): GID_PT entry - nn 20000004cfcf096b pn 22000004cfcf096b portid=0b10e8.
scsi(4): GID_PT entry - nn 20000004cf87d81f pn 22000004cf87d81f portid=0b10ef.
scsi(4): GID_PT entry - nn 20000004cf87d77d pn 22000004cf87d77d portid=0b189f.
scsi(4): GID_PT entry - nn 20000004cf87d75a pn 22000004cf87d75a portid=0b18a3.
scsi(4): GID_PT entry - nn 20000004cfcf02c4 pn 22000004cfcf02c4 portid=0b18a5.
scsi(4): GID_PT entry - nn 20000004cfcf099a pn 22000004cfcf099a portid=0b18a6.
scsi(4): GID_PT entry - nn 20000004cf87d7f6 pn 22000004cf87d7f6 portid=0b18a7.
scsi(4): GID_PT entry - nn 20000004cf87f614 pn 22000004cf87f614 portid=0b18ac.
scsi(4): GID_PT entry - nn 20000004cfcf0460 pn 22000004cfcf0460 portid=0b18ad.
scsi(4): GID_PT entry - nn 20000004cfcf0407 pn 22000004cfcf0407 portid=0b18ae.
scsi(4): GID_PT entry - nn 20000004cfcf02b1 pn 22000004cfcf02b1 portid=0b18b1.
scsi(4): GID_PT entry - nn 20000004cfcf02b3 pn 22000004cfcf02b3 portid=0b18b2.
scsi(4): GID_PT entry - nn 50060b00641cc28f pn 50060b00641cc28e portid=0b1e00.
scsi(4): GID_PT entry - nn 50060b00641cc28d pn 50060b00641cc28c portid=0b1f00.
scsi(4): device wrap (0b1f00)
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): Asynchronous RSCR UPDATE.
scsi(4): RSCN database changed -- 010b 1000.
...

Andrew Vasquez

2004-03-12 06:33 UTC #6 lore raw

Quoted 8 lines · Grant Grundler

Quoted 7 lines
There are three places where the driver could fall into stuck case of handling RSCNs. The attached patch introduces behaviour consistent with what we have for several of our other platform drivers. The end result is the will be 1) The driver will not hang during init/post-init due to the stream of RSCNs. 2) The driver after init, will *not* present any devices to the mid-layer due to the volatility within the fabric.

Quoted 7 lines

Still doesn't seem to make forward progress...console output appended. (cut/pasted...white space is probably mangled)
And now the ssh sessions are "hung" (un responsive). So I can't reboot the box to 'clear' the error. We must be pretty close to a fix. :^)

Arrgg... Ok, locally I managed to convince the firmware group to give me a 'special' build which posts RSCN events to the driver every 100ms. This, at least in my mind, should be similiar (perhaps not the exact same) to the pattern of events present in your configuration with the borken JBOD (as can be consistently observed from the traces).

On my dual Xeon (with HT) box, scsi-misc-2.6 with my earlier patch, and some minimal printk()s, worked as I would expect -- looped 256 times through the qla2x00_configure_loop() do/while loop in qla2x00_initialize_adapter(). No devices mapped, insmod completed. And the DPC routine (kernel thread) then tasked with managing the unending flood of RSCN events. With all this activity, unloading the driver (with a modprobe -r qla2300) took an a bit of time, but did ultimately complete.

So, I'm not entirely clear on what else is going on with your configuration. I'll try to get some runtime on an ia64 machine tomorrow to perform the same test.

Sorry about leaving your machine in such a borked state, but, could you reverify the test? I don't believe we'll need any extended error logging, so disable DEBUG2. If that fails, then I just may need that SSH access.

Thanks,
Andrew Vasquez

Lincoln Dale

2004-03-12 13:30 UTC #7 lore raw

Quoted 3 lines · Andrew Vasquez

So, I'm not entirely clear on what else is going on with your configuration. I'll try to get some runtime on an ia64 machine tomorrow to perform the same test.

if you have access to some SAN test equipment (e.g. Agilent SAN Tester), or SAN-rootkit (e.g. we have internal tools which can cause RSCN floods, FLOGI floods, PLOGI floods, rogue injection of vast quantities of NS registrations ...), it currently doesn't seem too hard to upset the qla2300 into a never-ending incomplete state such that Grant has seen.

have you guys ever considered rate-limiting NS queries following receiving RSCNs?

cheers,

lincoln.

Andrew Vasquez

2004-03-15 05:29 UTC #8 lore raw

Quoted 11 lines · Lincoln Dale

Quoted 3 lines · Andrew Vasquez
So, I'm not entirely clear on what else is going on with your configuration. I'll try to get some runtime on an ia64 machine tomorrow to perform the same test.
if you have access to some SAN test equipment (e.g. Agilent SAN Tester), or SAN-rootkit (e.g. we have internal tools which can cause RSCN floods, FLOGI floods, PLOGI floods, rogue injection of vast quantities of NS registrations ...), it currently doesn't seem too hard to upset the qla2300 into a never-ending incomplete state such that Grant has seen.

Unfortunately (at least locally) we don't have some nice Agilent hardware. I have managed to gather some 'traffic generating' hardware together, but, from what we've seen, the disconnect in originator/source of the RSCN frames seems to wreak havoc in the BB credit area. In any case, we'll try some other options tomorrow.

Quoted 3 lines

have you guys ever considered rate-limiting NS queries following receiving RSCNs?

Well, looking through the code, there are a few additional places where we could limit processing during loop-resync (i.e. device discovery) when there are outstanding loop resyncs (RSCNs) without littering the whole process with tons of:

	if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
		break;		// skip...

I can take a look at these places.

With recent QLogic drivers (8.x series included) on 23xx (and 63xx) ISPs, we started to employ a more fabric non-disruptive method of handling 'port-type' RSCNs, effectively using a series of ADISCs and PLOGIs to handle disconnects/additions and movements of ports within a fabric -- for the initiated, qla_rscn.c contains the complete set of patterns and logic describing the process.

In a sense, one could consider this 'rate-limiting' in essence, but given most devices on a fabric are 'passive' in nature, RSCN handling (including tricks and intelligence) at the lowest-link in the chain doesn't provide for much in the way of manuverability.

Regards,
Andrew Vasquez

Grant Grundler

author

2004-03-12 18:32 UTC #9 lore raw

In reply to Andrew Vasquez

Quoted 2 lines · Andrew Vasquez

Sorry about leaving your machine in such a borked state, but, could you reverify the test?

Certainly.

Quoted 2 lines

I don't believe we'll need any extended error
logging, so disable DEBUG2.

ok - I'll disable DEBUG2 and upgrade to 2.6.4-* kernel.

thanks,
grant

Grant Grundler

author

2004-03-14 06:33 UTC #10 lore raw

In reply to Andrew Vasquez

On Thu, Mar 11, 2004 at 10:11:19PM -0800, Andrew Vasquez wrote:
....

Quoted 2 lines

So, I'm not entirely clear on what else is going on with your configuration....

Me either. Since this is clearly related to a HW bug or config issue, I'll try to track down what's "uncouth" about my setup next week. Hopefully I can figure that out and it will be an obvious clue why qla2xxx isn't dealing with RSCNs or whatever is going on.

Quoted 1 line

Sorry about leaving your machine in such a borked state,

np. This is a crash-n-bash machine. It has remote mgt built-in which supports remote console and remote reset/power control.

Quoted 4 lines

but, could
you reverify the test? I don't believe we'll need any extended error logging, so disable DEBUG2. If that fails, then I just may need that SSH access.

I reverified with latest lia64.bkbits.net/linux-ia64-2.5 tree (2.6.4) and DEBUG2 disabled. Console output appended.

Looks like loading the patched qla2300 (rscn_handling-v8.00.00b10_2.diff) completely locks out any disk accesses. An existing ssh login responds until I attempt to touch something (eg shell completion) on disk. I can't open a new ssh session to the box.

thanks,
grant

....
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
i8042.c: i8042 controller self test timeout.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 131072 buckets, 2048Kbytes
TCP: Hash tables configured (established 4194304 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192kB freed
INIT: version 2.85 booting
Setting disc parameters: done.
Activating swap.
Adding 1534160k swap on /dev/sdb2. Priority:-1 extents:1 Checking root file system...
fsck 1.35-WIP (31-Jan-2004)
/dev/sdb3: clean, 570623/4194304 files, 4274589/8377897 blocks EXT3 FS on sdb3, internal journal
System time was Sun Mar 14 05:57:13 UTC 2004.
Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sun Mar 14 05:57:15 UTC 2004. Calculating module dependencies... done.
Loading modules...

tg3

tg3: no version for "per_cpu__local_per_cpu_offset" found: kernel tainted.
tg3.c:v2.9 (March 8, 2004)
PCI: Found IRQ 57 for device 0000:20:02.0
IOSAPIC: vector 57 -> CPU 0x0100, enabled
eth1: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:6e:1e:9e:e7
PCI: Found IRQ 62 for device 0000:60:01.0
IOSAPIC: vector 62 -> CPU 0x0000, enabled
eth2: Tigon3 [partno(A6847-60001) rev 0105 PHY(serdes)] (PCI:33MHz:64-bit) 10/100/1000BaseT Ethernet 00:04:76:de:51:a4

    e1000

Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k2 Copyright (c) 1999-2004 Intel Corporation.
PCI: Found IRQ 58 for device 0000:40:01.0
IOSAPIC: vector 58 -> CPU 0x0100, enabled
eth3: Intel(R) PRO/1000 Network Connection
PCI: Found IRQ 59 for device 0000:40:01.1
IOSAPIC: vector 59 -> CPU 0x0000, enabled
eth4: Intel(R) PRO/1000 Network Connection
All modules loaded.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Checking all file systems...
fsck 1.35-WIP (31-Jan-2004)
Setting kernel variables..
Mounting local filesystems...
Cleaning /tmp /var/run /var/lock.
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
ip_tables: (C) 2000-2002 Netfilter core team Aborting iptables load: unknown ruleset, "active". Setting up IP spoofing protection: rp_filter. Configuring network interfaces...done.
Starting portmap daemon: portmap.

Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Sat Mar 13 21:57:20 PST 2004

Running ntpdate to synchronize clock.
Initializing random number generator...done.
Recovering nvi editor sessions... done.
Setting up X server socket directory /tmp/.X11-unix...done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting firewall (iptables):........ip_conntrack version 2.1 (8192 buckets, 65536 max) - 440 bytes per conntrack
.........................
..Starting NAT:........
Starting web server: Apache2tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
.
STARTDISTCC is set to NO in /etc/default/distcc
/usr/bin/distccd not starting
Starting disk temperature monitoring daemon: disabled.
Starting internet superserver: inetd.
Starting mail transport agent: Postfix.
rsync daemon not enabled in /etc/default/rsync
Starting OpenBSD Secure Shell server: sshd.
Starting the system activity data collector: sadc.
Starting NFS common utilities: statd lockd.
Starting ProFTPD ftp daemon: proftpd.
Starting periodic command scheduler: cron.
Configuring for Hazard/etc/rc2.d/S99hazard: line 26: /tmp/hazard/rawrebind: No such file or directory Starting S.M.A.R.T. daemon: smartd.

Debian GNU/Linux testing/unstable gsyprf3.external.hp.com ttyS0

gsyprf3.external.hp.com login: root
Password:
Last login: Sat Mar 13 21:44:43 2004 on ttyS0
Linux gsyprf3.external.hp.com 2.6.4 #1 SMP Sat Mar 13 20:12:56 PST 2004 ia64 GNU/Linux

The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law.

gsyprf3:~# sync
gsyprf3:~# modprobe qla2300
QLogic Fibre Channel HBA Driver (a000000200314bb0)
PCI: Found IRQ 66 for device 0000:80:01.0
IOSAPIC: vector 66 -> CPU 0x0100, enabled
qla2300 0000:80:01.0: Found an ISP2312, irq 66, iobase 0xc0000000c8041000
qla2300 0000:80:01.0: Configuring PCI space...
qla2300 0000:80:01.0: Configure NVRAM parameters...
qla2300 0000:80:01.0: Verifying loaded RISC code...
scsi(4): Verifying Checksum of loaded RISC code.
scsi(4): Checksum OK, start firmware.
scsi(4): Issue init firmware.
qla2300 0000:80:01.0: LIP reset occured (f7f7).
qla2300 0000:80:01.0: Waiting for LIP to complete...
scsi(4): Port database changed 0000 0004.
qla2300 0000:80:01.0: LOOP UP detected (2 Gbps).
scsi(4): F/W Ready - OK 
scsi(4): fw_state=3 curr time=fffed60b.
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80040
scsi(4): RSCN queue entry[0] = [00/000000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[0] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[2] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[3] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[5] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[11] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[12] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[20] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[27] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[28] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[3] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[5] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[13] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[15] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[21] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[22] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[23] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[30] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[31] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[7] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[16] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
IN=eth0 OUT= MAC=00:30:6e:1e:ce:0a:00:10:2f:6b:e8:88:08:00 SRC=63.195.118.181 DST=192.6.38.17 LEN=44 TOS=0x00 PREC=0x00 TTL=13 ID=56298 PROTO=UDP SPT=1093 DPT=38293 LEN=24 
IN=eth0 OUT= MAC=00:30:6e:1e:ce:0a:00:10:2f:6b:e8:88:08:00 SRC=63.195.118.181 DST=192.6.38.17 LEN=44 TOS=0x00 PREC=0x00 TTL=13 ID=56299 PROTO=UDP SPT=1093 DPT=38293 LEN=24 
IN=eth0 OUT= MAC=00:30:6e:1e:ce:0a:00:10:2f:6b:e8:88:08:00 SRC=63.195.118.181 DST=192.6.38.17 LEN=44 TOS=0x00 PREC=0x00 TTL=13 ID=56300 PROTO=UDP SPT=1093 DPT=38293 LEN=24 
IN=eth0 OUT= MAC=00:30:6e:1e:ce:0a:00:10:2f:6b:e8:88:08:00 SRC=63.195.118.181 DST=192.6.38.17 LEN=44 TOS=0x00 PREC=0x00 TTL=13 ID=56301 PROTO=UDP SPT=1093 DPT=38293 LEN=24 
IN=eth0 OUT= MAC=00:30:6e:1e:ce:0a:00:10:2f:6b:e8:88:08:00 SRC=63.195.118.181 DST=192.6.38.17 LEN=44 TOS=0x00 PREC=0x00 TTL=13 ID=56302 PROTO=UDP SPT=1093 DPT=38293 LEN=24 
IN=eth0 OUT= MAC=00:30:6e:1e:ce:0a:00:10:2f:6b:e8:88:08:00 SRC=63.195.118.181 DST=192.6.38.17 LEN=44 TOS=0x00 PREC=0x00 TTL=13 ID=56303 PROTO=UDP SPT=1093 DPT=38293 LEN=24 
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[17] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[27] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[28] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[6] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[13] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[15] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[21] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[22] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[28] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[30] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[6] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[7] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[14] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[22] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[23] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): Loop down counter running= 0 or Resync needed- dpc flags= 144
qla2300 0000:80:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi(4): Configure loop -- dpc flags =0x80
scsi(4): RSCN queue entry[31] = [01/0b1000].
scsi(4): device_resync: rscn overflow.
scsi(4): Trying Fabric Login w/loop id 0x0081 for port 0b10ce.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
scsi(4): RSCN database changed -- 010b 1000.
...

Grant Grundler

author

2004-12-27 18:59 UTC #11 lore raw

In reply to Grant Grundler

On Fri, Mar 05, 2004 at 10:21:47AM -0700, Grant Grundler wrote:
...

Quoted 6 lines

appended. I've trimmed it down...full log is at:
ftp://gsyprf10.external.hp.com/kernels/rx2600/gsyprf3.log_qla2300_F_Port
BTW, this is running on an HP rx2600 (ia64) and both qla2312 ports are connected to one HP FC16 (IIRC) switch. Three DS2405 disk enclosures are also connected to the switch. IIRC, only two are powered up.

Andrew,
I finally got this config working. I changed the FC16 port settings from "fabric" to "loop" mode for the three DS2405 disk trays.

To make things simple, I've set half the ports to loop mode and the other half to fabric mode. Hosts plug into "fabric" ports and disks into "loop" ports.

I'm over simplifying things here since I got this working a month or two ago. If someone wants to poke around with this config, please ask.

thanks,
grant