Skip to contentSkip to conversation

a7n8x-x & i2c

DISCUSSION backblue 3 participants 9 messages Mar 10, 2004 – Mar 12, 2004

lore
Share & tools
lore

backblue

author
#0 lore raw

Hello,

I have compiled 2.6.3, with i2c suporte for my chipset "nforce2" to the board asus a7n8x-x, but, it crashes my box all the time, dont know why! But it only crashes after login and a couple of minutes working...
any one know womething about this?

#1 lore raw

Hi,

Quoted 3 lines

I have compiled 2.6.3, with i2c suporte for my chipset "nforce2" to the board asus a7n8x-x, but, it crashes my box all the time, dont know why! But it only crashes after login and a couple of minutes working...
any one know womething about this?

Is the crash only with i2c or are you just trying linux on this board?

Craig

author
#2 lore raw

It only crashes with i2c, the kernel it's working nicelly, at the moment, but without i2c, if i compile it with i2c build in, it crashes.

Quoted 10 lines · On Wed, 10 Mar 2004 20:05:00 +0100 Craig Bradney <[email protected]> wrote:

Hi,

Quoted 3 lines

I have compiled 2.6.3, with i2c suporte for my chipset "nforce2" to the board asus a7n8x-x, but, it crashes my box all the time, dont know why! But it only crashes after login and a couple of minutes working...
any one know womething about this?

Is the crash only with i2c or are you just trying linux on this board?

Craig

#3 lore raw

Ok, thought you might have had the nForce2 bug issue as well. Perhaps you haave already patched for that.

Craig

Quoted 21 lines · backblue

It only crashes with i2c, the kernel it's working nicelly, at the moment, but without i2c, if i compile it with i2c build in, it crashes.

Quoted 10 lines · On Wed, 10 Mar 2004 20:05:00 +0100 Craig Bradney <[email protected]> wrote:

Hi,

Quoted 3 lines

I have compiled 2.6.3, with i2c suporte for my chipset "nforce2" to the board asus a7n8x-x, but, it crashes my box all the time, dont know why! But it only crashes after login and a couple of minutes working...
any one know womething about this?

Is the crash only with i2c or are you just trying linux on this board?

Craig

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author
#4 lore raw

If i run sensors-detect, it doesn't detect any chips, does a7n8x-x should work?

Quoted 28 lines · On Wed, 10 Mar 2004 22:14:43 +0100 Craig Bradney <[email protected]> wrote:

Ok, thought you might have had the nForce2 bug issue as well. Perhaps you haave already patched for that.

Craig

Quoted 21 lines · backblue

It only crashes with i2c, the kernel it's working nicelly, at the moment, but without i2c, if i compile it with i2c build in, it crashes.

Quoted 10 lines · On Wed, 10 Mar 2004 20:05:00 +0100 Craig Bradney <[email protected]> wrote:

Hi,

Quoted 3 lines

I have compiled 2.6.3, with i2c suporte for my chipset "nforce2" to the board asus a7n8x-x, but, it crashes my box all the time, dont know why! But it only crashes after login and a couple of minutes working...
any one know womething about this?

Is the crash only with i2c or are you just trying linux on this board?

Craig

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
In reply to backblue
Quoted 6 lines · backblue

Hello,

I have compiled 2.6.3, with i2c suporte for my chipset "nforce2" to the board asus a7n8x-x, but, it crashes my box all the time, dont know why! But it only crashes after login and a couple of minutes working... any one know womething about this?

What is the oops reported?

Do you have any of the CONFIG_I2C_DEBUG_* options enabled? If so, please do not, as that was causing a few oopses. All of them are fixed in the latest -mm release.

thanks,

greg k-h

author
#6 lore raw

No i dont have nothing of that enable! all debug options are disable, should a7n8x-x work with lm_sensors? sensors-detect says that dont founds any chip's in my machine... but it finds nforce2 SMBus.

Quoted 17 lines · On Thu, 11 Mar 2004 16:31:35 -0800 Greg KH <[email protected]> wrote:
Quoted 6 lines · backblue

Hello,

I have compiled 2.6.3, with i2c suporte for my chipset "nforce2" to the board asus a7n8x-x, but, it crashes my box all the time, dont know why! But it only crashes after login and a couple of minutes working... any one know womething about this?

What is the oops reported?

Do you have any of the CONFIG_I2C_DEBUG_* options enabled? If so, please do not, as that was causing a few oopses. All of them are fixed in the latest -mm release.

thanks,

greg k-h

#7 lore raw
Quoted 2 lines · backblue

No i dont have nothing of that enable! all debug options are disable, should a7n8x-x work with lm_sensors?

What is "a7n8x-x"?

Quoted 1 line

sensors-detect says that dont founds any chip's in my machine...

Then I would believe that no sensors are present for it :)

Quoted 1 line

but it finds nforce2 SMBus.

Hm, did you try the 2.4 package of lmsensors on a 2.4 kernel? It supports more chip drivers than 2.6 currently does.

good luck,

greg k-h

#8 lore raw
Quoted 6 lines · Greg KH
Quoted 2 lines · backblue

No i dont have nothing of that enable! all debug options are disable, should a7n8x-x work with lm_sensors?

What is "a7n8x-x"?

An ASUS motherboard.

Quoted 9 lines
Quoted 1 line

sensors-detect says that dont founds any chip's in my machine...

Then I would believe that no sensors are present for it :)

Quoted 1 line

but it finds nforce2 SMBus.

Hm, did you try the 2.4 package of lmsensors on a 2.4 kernel? It supports more chip drivers than 2.6 currently does.

Try using the w83781d

<M> Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F

Well.. that one works here on an A7N8X Deluxe anyway. I dont think it worked for me builtin, but I load it as a module and its ok

Craig