ALSA MIDI serial u16550 horribly broken in 2.6.4
poking io port 0x1 probably isn't going to do much good. Here's what happens after a 'modprobe snd_serial_u16550'
Dave
u16550: can't grab port 0x1
no UART detected at 0x1
Unable to handle kernel NULL pointer dereference at virtual address 00000020 printing eip: c788b38f *pde = 00000000 Oops: 0000 [#1] SMP CPU: 0 EIP: 0060:[<c788b38f>] Not tainted EFLAGS: 00010246 (2.6.4-prep)
EIP is at snd_info_unregister+0x5/0x60 [snd]
eax: 00000000 ebx: c1286b1c ecx: 00000000 edx: 00000000
esi: 00000000 edi: c1286b59 ebp: c1286b40 esp: c21cef4c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 8679, threadinfo=c21ce000 task=c37a0ce0)
Stack: c1286b1c fffffff0 c1286b59 c7889c6d 00000000 c78991f6 c1286b59 c1286b40
c78073f3 00009600 0001c200 00000000 00000000 c7807490 c1286b1c 00000000
00000000 00000000 c031bbd8 c21ce000 c78074b4 c031bbf8 c789ac00 c0138fad
Call Trace:
[<c7889c6d>] snd_card_free+0x163/0x1ed [snd]
[<c78073f3>] snd_serial_probe+0x12a/0x1de [snd_serial_u16550]
[<c7807490>] snd_serial_probe+0x1c7/0x1de [snd_serial_u16550]
[<c78074b4>] alsa_card_serial_init+0xd/0x34 [snd_serial_u16550]
[<c0138fad>] sys_init_module+0x14f/0x25f
[<c02c4567>] syscall_call+0x7/0xb
Code: 8b 40 20 85 c0 74 05 8b 78 34 eb 06 8b 3d 2c 5f 89 c7 bb 90Quoted 2 lines · Dave Jones
poking io port
0x1probably isn't going to do much good. Here's what happens after a 'modprobesnd_serial_u16550'
Thanks. I've fixed this problem in our CVS tree. The oops should be fixed in the current Linus's tree, too.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
Quoted 7 lines · Jaroslav Kysela
Quoted 2 lines · Dave Jones
poking io port
0x1probably isn't going to do much good. Here's what happens after a 'modprobesnd_serial_u16550'Thanks. I've fixed this problem in our CVS tree. The oops should be fixed in the current Linus's tree, too.
Hmm, I don't see it at http://cvs.sourceforge.net/viewcvs.py/alsa/alsa-kernel/drivers/serial-u16550.c
Is there somewhere else I should look ?
This was pretty close to top of tree already btw, (only missing the csets from a few hours ago). I'll test again shortly with top-of-tree.
Dave
At Mon, 15 Mar 2004 17:51:10 +0000,
Quoted 4 lines · Dave Jones
Quoted 2 lines · Jaroslav Kysela
On Mon, 15 Mar 2004, Dave Jones wrote:
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
poking io port
0x1probably isn't going to do much good. Here's what happens after a 'modprobesnd_serial_u16550'Thanks. I've fixed this problem in our CVS tree. The oops should be fixed in the current Linus's tree, too.
Hmm, I don't see it at http://cvs.sourceforge.net/viewcvs.py/alsa/alsa-kernel/drivers/serial-u16550.c
Is there somewhere else I should look ?
it must be the usual delay of sourceforce's anon cvs tree... the patch is attached below.
Takashi
sound/drivers/serial-u16550.c +2 -3
@@ -342,7 +342,7 @@unsigned char c;/* Do some vague tests for the presence of the uart */ -if (io_base ==0 ) { +if (io_base ==0 || io_base ==SNDRV_AUTO_PORT ) {return -ENODEV ;/* Not configured */ }
@@ -804,10 +804,9 @@return err; } -if (irq >=0 ) { +if (irq >=0 && irq !=SNDRV_AUTO_IRQ ) {if (request_irq (irq, snd_uart16550_interrupt,SA_INTERRUPT ,"Serial MIDI" , (void *) uart)) { - uart->irq =-1 ;snd_printk ("irq %d busy. Using Polling.\n" , irq); }else { uart->irq = irq;