Skip to contentSkip to conversation

Mouse wheel problems again...

DISCUSSION Toby A Inkster 1 participant 1 message Mar 16, 2004

lore
Share & tools
lore
#0 lore raw

Dear all,

Am having problems using my mouse wheel on 2.6.3, when it worked fine in 2.4.24.

Technically it's not a mouse, but a trackball. And technically not a wheel, but a couple of buttons. But this shouldn't make any difference, should it?

When I click the scroll buttons they are both treated as middle-click (button
2) when they should be treated as scrolling (buttons 4 and 5) -- this is according to xev.

The mouse is plugged into the PS/2 port, but I also have the USB mouse stuff compiled as a module just in case I change my mind.

I think I've tried most of the suggestions I could find in the archive and on Google.

Using hexdump on /dev/input/mice, the signals sent for up and down scroll buttons seem identical to each other.

Here is some (possibly relevent) information:

[tai@ophelia (pts/1) ~]$ cat /boot/config | grep -i mouse ; echo '' CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_USB_MOUSE=m

[tai@ophelia (pts/1) ~]$ dmesg | grep -i mouse ; echo ''
mice: PS/2 mouse device common for all mice
input: PS/2 Logitech Mouse on isa0060/serio1

[tai@ophelia (pts/1) input]$ cat /proc/bus/input/devices|tac|tail -n 8|tac
I: Bus=0011 Vendor=0002 Product=0001 Version=006d
N: Name="PS/2 Logitech Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

And here's some stuff from XF86Config-4:

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option      "SendCoreEvents"        "true"
    Option      "Device"                "/dev/input/mice"
    Option      "Protocol"              "ExplorerPS/2"
    Option      "Buttons"               "5"
    Option      "Emulate3Buttons"
    Option      "Emulate3Timeout"       "50"
    Option      "ZAxisMapping"          "4 5"

EndSection
# [...]
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
InputDevice "Mouse1" "SendCoreEvents"
EndSection

Any suggesitons?

Thanks in advance for any light than can be shed.

Signature · 5 lines
Toby A Inkster BSc (Hons) ARCS
Contact Me - http://www.goddamn.co.uk/tobyink/?page=132

Q: WHY DO ELEPHANTS HAVE BIG EARS?
A: BECAUSE NODDY WOULDN'T PAY THE RANDOM.