usb broken in 2.6.5-rc1?
My mouse works, but this happens when I connect my USB 2.0 mass storage device:
usb 1-3: new high speed USB device using address 2 irq 21: nobody cared!
Call Trace: [<c010960a>] __report_bad_irq+0x2a/0x90 [<c01096fc>] note_interrupt+0x6c/0xa0 [<c01099d1>] do_IRQ+0x121/0x130 [<c0107cf4>] common_interrupt+0x18/0x20
handlers:
[<c0291c00>] (usb_hcd_irq+0x0/0x70) [<c0291c00>] (usb_hcd_irq+0x0/0x70) [<c0291c00>] (usb_hcd_irq+0x0/0x70) Disabling IRQ #21
usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 2, error -110 usb 1-3: new high speed USB device using address 3 usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 3, error -110 usb 1-3: new high speed USB device using address 4 usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 4, error -110 usb 1-3: new high speed USB device using address 5 usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 5, error -110 usb 1-3: new high speed USB device using address 6 usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 6, error -110 usb 1-3: new high speed USB device using address 7 usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 7, error -110 usb 1-3: new high speed USB device using address 8 usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 8, error -110 usb 1-3: new high speed USB device using address 9 usb 1-3: control timeout on ep0out
usb 1-3: control timeout on ep0out
usb 1-3: device not accepting address 9, error -110 usb 1-3: new high speed USB device using address 10 usb 1-3: control timeout on ep0out
[and so on]
Oh, and my mouse stops working.
Has anyone ever seen USB mass storage actually work under Linux? Just curious. This is a VIA chipset, by the way.
Felix
Quoted 2 lines · Felix von Leitner
My mouse works, but this happens when I connect my USB 2.0 mass storage device:
Care to send this to the linux-usb-devel mailing list where it will reach the proper people?
Quoted 1 line
Has anyone ever seen USB mass storage actually work under Linux?
Heh, Loads of people have.
Quoted 1 line
Just curious. This is a VIA chipset, by the way.
Ick, they are known to be buggy :(
thanks,
greg k-h