Exchange DAC Setting Disappeared - CMIPCI
Hi
I see that the exchange DAC setting has disappeared from my mixer settings. I understand after reading thread
http://www.mail-archive.com/alsa-devel%40lists.sourceforge.net/msg09930.html
That this is because it wasn't working well in a multi-channel context.
The use that I was putting this to, however, was to switch between headphones and loudspeakers (by connecting loudspeakers to blue and headphones to green). I only ever do stereo output.
Is it possible to achieve the same functionality without this switch? If not, would it be possible to bring it back? Specifically I would like to be able to switch between loudspeakers and headphones without having to restart any applications and for the switch to have immediate effect.
My card is a 6 channel on board cmipci:
00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5900
Many thanks
John
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
I was able to restore the 'Exchange DAC' Setting with the attached patch. Do you think it would be worth while to try and make it a module setting?
Cheers
John
Quoted 30 lines · John Knottenbelt
Hi
I see that the exchange DAC setting has disappeared from my mixer settings. I understand after reading thread
http://www.mail-archive.com/alsa-devel%40lists.sourceforge.net/msg09930.htm
lThat this is because it wasn't working well in a multi-channel context.
The use that I was putting this to, however, was to switch between headphones and loudspeakers (by connecting loudspeakers to blue and headphones to green). I only ever do stereo output.
Is it possible to achieve the same functionality without this switch? If not, would it be possible to bring it back? Specifically I would like to be able to switch between loudspeakers and headphones without having to restart any applications and for the switch to have immediate effect.
My card is a 6 channel on board cmipci:
00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5900Many thanks
John
Quoted 9 lines
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
pci/cmipci.c renamed from pci/cmipci.c.orig +2 -2
@@ -2753,13 +2753,13 @@ err =snd_ctl_add (cm->card,snd_ctl_new1 (sw, cm));if (err <0 )return err; } -if (! cm->can_multi_ch) { +/* if (! cm->can_multi_ch) { */ err =snd_ctl_add (cm->card,snd_ctl_new1 (&snd_cmipci_nomulti_switch, cm));if (err <0 )return err; - } +/* } */ if (cm->device ==PCI_DEVICE_ID_CMEDIA_CM8738 || cm->device ==PCI_DEVICE_ID_CMEDIA_CM8738B ) { sw = snd_cmipci_8738_mixer_switches;for (idx =0 ; idx <num_controls (snd_cmipci_8738_mixer_switches); idx++, sw++) {