module is not unloaded when probe fails
When I try to load a module and it fails (snd-darla20 in this case) the module is not unloaded. IIRC it didn't happen some months ago, but I have no idea what is the cause because I changed a lot of stuff in the meantime (kernel, compiler, modutils...). Is this the expected behaviour ?
[Giu@Jay Giu]$ uname -a
Linux Jay 2.6.3-ben2 #10 SMP Sun Mar 14 21:46:34 CET 2004 ppc unknown
[root@Jay Giu]# dmesg
[...]
PCI: Enabling device 0001:01:15.0 (0004 -> 0006) [...]
Echoaudio: probe of 0001:01:15.0 failed with error -1 [root@Jay Giu]# lsmod
Module Size Used by snd_darla20 67908 0 snd_pcm 137692 1 snd_darla20 snd_timer 33000 1 snd_pcm snd 72800 3 snd_darla20,snd_pcm,snd_timer snd_page_alloc 14436 2 snd_darla20,snd_pcm therm_windtunnel 9748 0
--
Giuliano.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
Quoted 5 lines · Giuliano Pochini
When I try to load a module and it fails (snd-darla20 in this case) the module is not unloaded. IIRC it didn't happen some months ago, but I have no idea what is the cause because I changed a lot of stuff in the meantime (kernel, compiler, modutils...). Is this the expected behaviour ?
Yes, it's by design. If a module sees it can't drive the available hardware, it *should* stay loaded so you either can
- add new hardware it can drive or
- tell it via /sys/bus/pci/drivers/tulip/new_id that it should drive dome hardware with previously unknown pci id.
Quoted 2 lines
[Giu@Jay Giu]$ uname -a
Linux Jay 2.6.3-ben2 #10 SMP Sun Mar 14 21:46:34 CET 2004 ppc unknown
It's a new 2.6 feature.
Regards,
Carl-Daniel
Signature · 9 lines
http://www.hailfinger.org/ ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click