UTF-8ifying the kernel sources
Subsystems (3)
PATCH 4/4 UTF-8ifying the kernel sources
arch/ppc/platforms/proc_rtas.c +1 -1
@@ -515,7 +515,7 @@ have_strings =1 ;break ;case THERMAL_SENSOR : - n +=sprintf (buf+n,"Temp. (�C/�F):\t" ); + n +=sprintf (buf+n,"Temp. (°C/°F):\t" ); temperature =1 ;break ;case LID_STATUS :
arch/ppc64/kernel/rtas-proc.c +1 -1
@@ -608,7 +608,7 @@ }break ;case THERMAL_SENSOR : - n +=sprintf (buf+n,"Temp. (�C/�F):\t" ); + n +=sprintf (buf+n,"Temp. (°C/°F):\t" ); temperature =1 ;break ;case LID_STATUS :
drivers/macintosh/therm_adt7467.c +9 -9
@@ -53,7 +53,7 @@MODULE_LICENSE ("GPL" );MODULE_PARM (limit_adjust,"i" ); -MODULE_PARM_DESC (limit_adjust,"Adjust maximum temperatures (50�C cpu, 70�C gpu) by N �C." ); +MODULE_PARM_DESC (limit_adjust,"Adjust maximum temperatures (50°C cpu, 70°C gpu) by N °C." );MODULE_PARM (fan_speed,"i" );MODULE_PARM_DESC (fan_speed,"Specify fan speed (0-255) when lim < temp < lim+8 (default 128)" );
@@ -142,7 +142,7 @@ }printk (KERN_INFO "adt746x: Putting max temperatures back from %d, %d, %d," -" to %d, %d, %d, (�C)\n" , +" to %d, %d, %d, (°C)\n" , th->limits[0 ], th->limits[1 ], th->limits[2 ], th->initial_limits[0 ], th->initial_limits[1 ], th->initial_limits[2 ]);
@@ -271,14 +271,14 @@int var = temps[i] - lims[i];if (var >8 ) {if (th->overriding[fan_number] ==0 ) -printk (KERN_INFO "adt746x: Limit exceeded by %d�C, overriding specified fan speed for %s.\n" , +printk (KERN_INFO "adt746x: Limit exceeded by %d°C, overriding specified fan speed for %s.\n" , var, fan_number?"GPU" :"CPU" ); th->overriding[fan_number] =1 ;write_fan_speed (th,255 , fan_number); started =1 ; }else if ((!th->overriding[fan_number] || var <6 ) && var >0 ) {if (th->overriding[fan_number] ==1 ) -printk (KERN_INFO "adt746x: Limit exceeded by %d�C, setting speed to specified for %s.\n" , +printk (KERN_INFO "adt746x: Limit exceeded by %d°C, setting speed to specified for %s.\n" , var, fan_number?"GPU" :"CPU" ); th->overriding[fan_number] =0 ;write_fan_speed (th, fan_speed, fan_number);
@@ -309,8 +309,8 @@ || temps[1] != th->cached_temp[1] || temps[2] != th->cached_temp[2]) { printk(KERN_INFO "adt746x: Temperature infos:" - " thermostats: %d,%d,%d �C;" - " limits: %d,%d,%d �C;" + " thermostats: %d,%d,%d °C;" + " limits: %d,%d,%d °C;" " fan speed: %d RPM\n", temps[0], temps[1], temps[2], lims[0], lims[1], lims[2],
@@ -381,7 +381,7 @@ }printk (KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d" -" to %d, %d, %d (�C)\n" , +" to %d, %d, %d (°C)\n" , th->initial_limits[0 ], th->initial_limits[1 ], th->initial_limits[2 ], th->limits[0 ], th->limits[1 ], th->limits[2 ]);
@@ -421,7 +421,7 @@#define BUILD_SHOW_FUNC_DEG (name, data) \ static ssize_t show_##name(struct device *dev, char *buf) \ { \ - return sprintf(buf, "%d�C\n", data); \ + return sprintf(buf, "%d°C\n", data); \ }#define BUILD_SHOW_FUNC_INT (name, data) \ static ssize_t show_##name(struct device *dev, char *buf) \
@@ -435,7 +435,7 @@int val; \int i; \ val =simple_strtol (buf,NULL ,10 ); \ -printk (KERN_INFO "Adjusting limits by %d�C\n" , val); \ +printk (KERN_INFO "Adjusting limits by %d°C\n" , val); \ limit_adjust = val; \for (i=0 ; i <3 ; i++) \set_limit (thermostat, i); \
drivers/mtd/chips/cfi_probe.c +4 -4
@@ -250,12 +250,12 @@else printk ("No Vpp line\n" ); -printk ("Typical byte/word write timeout: %d �s\n" ,1 <<cfip->WordWriteTimeoutTyp); -printk ("Maximum byte/word write timeout: %d �s\n" , (1 <<cfip->WordWriteTimeoutMax) * (1 <<cfip->WordWriteTimeoutTyp)); +printk ("Typical byte/word write timeout: %d µs\n" ,1 <<cfip->WordWriteTimeoutTyp); +printk ("Maximum byte/word write timeout: %d µs\n" , (1 <<cfip->WordWriteTimeoutMax) * (1 <<cfip->WordWriteTimeoutTyp));if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) { -printk ("Typical full buffer write timeout: %d �s\n" ,1 <<cfip->BufWriteTimeoutTyp); -printk ("Maximum full buffer write timeout: %d �s\n" , (1 <<cfip->BufWriteTimeoutMax) * (1 <<cfip->BufWriteTimeoutTyp)); +printk ("Typical full buffer write timeout: %d µs\n" ,1 <<cfip->BufWriteTimeoutTyp); +printk ("Maximum full buffer write timeout: %d µs\n" , (1 <<cfip->BufWriteTimeoutMax) * (1 <<cfip->BufWriteTimeoutTyp)); }else printk ("Full buffer write not supported\n" );
drivers/net/wireless/netwave_cs.c +4 -4
@@ -4,18 +4,18 @@* Version: 0.4.1 * Description: Netwave AirSurfer Wireless LAN PC Card driver * Status: Experimental. -* Authors: John Markus Bj�rndalen <[email protected]> +* Authors: John Markus Bjørndalen <[email protected]> * Dag Brattli <[email protected]> * David Hinds <[email protected]> * Created at: A long time ago! * Modified at: Mon Nov 10 11:54:37 1997 * Modified by: Dag Brattli <[email protected]> * -* Copyright (c) 1997 University of Troms�, Norway +* Copyright (c) 1997 University of Tromsø, Norway * * Revision History: * -* 08-Nov-97 15:14:47 John Markus Bj�rndalen <[email protected]> +* 08-Nov-97 15:14:47 John Markus Bjørndalen <[email protected]> * - Fixed some bugs in netwave_rx and cleaned it up a bit. * (One of the bugs would have destroyed packets when receiving * multiple packets per interrupt).
@@ -164,7 +164,7 @@MODULE_PARM (pc_debug,"i" ); #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)static char *version = -"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bj�rndalen)\n" ; +"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n" ;#else #define DEBUG(n, args...)#endif