Kernel panic in 2.4.25
It's almost 100% (sometimes it just hangs) reproducable for me although in somewhat strange situation. I have to run Quagga/Zebra routing suite with zebra and ospfd daemons running. Networking restart script (removing 60 vlans, creating them again and assigning IPs to them) leads to panic. Process isn't always swapper, I have seen ip and kupdated as well, but trace is always same. I can't reproduce it with 2.4.20 kernel.
Unable to handle kernel NULL pointer dereference at virtual address
00000000
c0118743
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0118743>] Not tainted
EFLAGS: 00010082
eax: c02da4c4 ebx: c02da3c4 ecx: c02da4c4 edx: 00000000
esi: c02e7a20 edi: c02da2a0 ebp: c028df40 esp: c028df14
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c028d000)
Stack: 00000000 c02d1b80 00000000 00002400 00000000 00002400 00000004
00000000
00000001 c028df38 c028df38 c028df48 c0115898 c028df60 c01157c9
00000000
00000001 c02d1ba0 fffffffe c028df7c c01155ab c02d1ba0 00000000
c02d1900
Call Trace: [<c0115898>] [<c01157c9>] [<c01155ab>] [<c0108072>] [<c0105260>]
[<c0105260>] [<c010a228>] [<c0105260>] [<c0105260>] [<c0105286>]
[<c01052f9>]
[<c0105000>] [<c010502a>]
Code: 8b 02 89 48 04 89 01 89 51 04 89 0a 89 f1 39 d9 0f 85 37 ff
Quoted 9 lines
Quoted 9 lines
EIP;
c0118743<timer_bh+1b7/35c> <=====eax;
c02da4c4<tv1+4/804>
ebx;c02da3c4<tv2+124/220>
ecx;c02da4c4<tv1+4/804>
esi;c02e7a20<serial_timer+0/20>
edi;c02da2a0<tv2+0/220>
ebp;c028df40<init_task_union+1f40/2000>
esp;c028df14<init_task_union+1f14/2000>
Trace; c0115898 <bh_action+1c/4c>
Trace; c01157c9 <tasklet_hi_action+49/70>
Trace; c01155ab <do_softirq+4b/a0>
Trace; c0108072 <do_IRQ+96/a8>
Trace; c0105260 <default_idle+0/30>
Trace; c0105260 <default_idle+0/30>
Trace; c010a228 <call_do_IRQ+5/d>
Trace; c0105260 <default_idle+0/30>
Trace; c0105260 <default_idle+0/30>
Trace; c0105286 <default_idle+26/30>
Trace; c01052f9 <cpu_idle+41/54>
Trace; c0105000 <_stext+0/0>
Trace; c010502a <rest_init+2a/30>
Code; c0118743 <timer_bh+1b7/35c>
00000000 <_EIP>:
Code; c0118743 <timer_bh+1b7/35c> <=====
0: 8b 02 mov (%edx),%eax <=====
Code; c0118745 <timer_bh+1b9/35c>
2: 89 48 04 mov %ecx,0x4(%eax)
Code; c0118748 <timer_bh+1bc/35c>
5: 89 01 mov %eax,(%ecx)
Code; c011874a <timer_bh+1be/35c>
7: 89 51 04 mov %edx,0x4(%ecx)
Code; c011874d <timer_bh+1c1/35c>
a: 89 0a mov %ecx,(%edx)
Code; c011874f <timer_bh+1c3/35c>
c: 89 f1 mov %esi,%ecx
Code; c0118751 <timer_bh+1c5/35c>
e: 39 d9 cmp %ebx,%ecx
Code; c0118753 <timer_bh+1c7/35c>
10: 0f 85 37 ff 00 00 jne ff4d <_EIP+0xff4d> c0128690
<swap_entry
_free+18/3c>
<0>Kernel panic: Aiee, killing interrupt handler!
Signature · 3 lines
Hasso Tepper Elion Enterprises Ltd. WAN administrator
#
# Automatically generated make config: don't edit
#CONFIG_X86=y
# CONFIG_SBUS is not setCONFIG_UID16=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not setCONFIG_M686=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_HAS_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_PPRO_FENCE=yCONFIG_X86_F00F_WORKS_OK=yCONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
# CONFIG_X86_TSC_DISABLE is not setCONFIG_X86_TSC=y
#
# General setup
#CONFIG_NET=yCONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_ISA=yCONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not setCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_OOM_KILLER is not set
# CONFIG_PM is not set
# CONFIG_APM is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_STATS is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_NETLINK_DEV=mCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not setCONFIG_UNIX=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not setCONFIG_IP_ROUTE_NAT=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_TOS=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not setCONFIG_ARPD=y
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_AMANDA=mCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_LIMIT=mCONFIG_IP_NF_MATCH_MAC=mCONFIG_IP_NF_MATCH_PKTTYPE=mCONFIG_IP_NF_MATCH_MARK=mCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_DSCP=mCONFIG_IP_NF_MATCH_AH_ESP=mCONFIG_IP_NF_MATCH_LENGTH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_TCPMSS=mCONFIG_IP_NF_MATCH_HELPER=mCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_MATCH_CONNTRACK=mCONFIG_IP_NF_MATCH_UNCLEAN=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_MIRROR=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_NAT_AMANDA=mCONFIG_IP_NF_NAT_LOCAL=yCONFIG_IP_NF_NAT_SNMP_BASIC=mCONFIG_IP_NF_NAT_IRC=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_NAT_TFTP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_DSCP=mCONFIG_IP_NF_TARGET_MARK=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=mCONFIG_IP_NF_COMPAT_IPCHAINS=mCONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not setCONFIG_IPV6=m
#
# IPv6: Netfilter Configuration
#CONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_LIMIT=mCONFIG_IP6_NF_MATCH_MAC=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_MULTIPORT=mCONFIG_IP6_NF_MATCH_OWNER=mCONFIG_IP6_NF_MATCH_MARK=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_AHESP=mCONFIG_IP6_NF_MATCH_LENGTH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_KHTTPD is not set
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not setCONFIG_VLAN_8021Q=y
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not setCONFIG_BRIDGE=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not setCONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_CSZ=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_INGRESS=mCONFIG_NET_QOS=yCONFIG_NET_ESTIMATOR=yCONFIG_NET_CLS=yCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_BLK_DEV_GENERIC=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_ADMA100 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not setCONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_SVWKS=yCONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
# CONFIG_BLK_DEV_ATARAID_SII is not set
#
# SCSI support
#CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=253CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#CONFIG_I2O=mCONFIG_I2O_PCI=mCONFIG_I2O_BLOCK=mCONFIG_I2O_LAN=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_EEPRO100_PIO is not setCONFIG_E100=m
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not setCONFIG_E1000=yCONFIG_E1000_NAPI=y
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=yCONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_KCS is not set
# CONFIG_IPMI_WATCHDOG is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_SCx200 is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
#
# Direct Rendering Manager (XFree86 DRI support)
#
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_OBMOUSE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not setCONFIG_EXT3_FS=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not setCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_TRACE is not set
# CONFIG_XFS_DEBUG is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#CONFIG_VGA_CONSOLE=yCONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#CONFIG_FB=yCONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not setCONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not setCONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not setCONFIG_FBCON_CFB8=yCONFIG_FBCON_CFB16=yCONFIG_FBCON_CFB24=yCONFIG_FBCON_CFB32=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Support for USB gadgets
#
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not setCONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not setCONFIG_FRAME_POINTER=yCONFIG_LOG_BUF_SHIFT=0
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
Quoted 7 lines · Hasso Tepper
It's almost 100% (sometimes it just hangs) reproducable for me although in somewhat strange situation. I have to run Quagga/Zebra routing suite with zebra and ospfd daemons running. Networking restart script (removing 60 vlans, creating them again and assigning IPs to them) leads to panic. Process isn't always swapper, I have seen ip and kupdated as well, but trace is always same. I can't reproduce it with 2.4.20 kernel.
It's introduced with 2.4.25-rc1 (2.4.25-pre8 is OK). And it's still there in 2.4.26-rc1.
Quoted 71 lines
Unable to handle kernel NULL pointer dereference at virtual address 00000000 c0118743 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c0118743>] Not tainted EFLAGS: 00010082 eax: c02da4c4 ebx: c02da3c4 ecx: c02da4c4 edx: 00000000 esi: c02e7a20 edi: c02da2a0 ebp: c028df40 esp: c028df14 ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 0, stackpage=c028d000) Stack: 00000000 c02d1b80 00000000 00002400 00000000 00002400 00000004 00000000 00000001 c028df38 c028df38 c028df48 c0115898 c028df60 c01157c9 00000000 00000001 c02d1ba0 fffffffe c028df7c c01155ab c02d1ba0 00000000 c02d1900 Call Trace: [<c0115898>] [<c01157c9>] [<c01155ab>] [<c0108072>][<
c0105260>]
[<c0105260>] [<c010a228>] [<c0105260>] [<c0105260>] [<c0105286>]
[<c01052f9>]
[<c0105000>] [<c010502a>]Code: 8b 02 89 48 04 89 01 89 51 04 89 0a 89 f1 39 d9 0f 85 37 ffQuoted 9 lines
Quoted 9 lines
EIP;
c0118743<timer_bh+1b7/35c> <=====eax;
c02da4c4<tv1+4/804>
ebx;c02da3c4<tv2+124/220>
ecx;c02da4c4<tv1+4/804>
esi;c02e7a20<serial_timer+0/20>
edi;c02da2a0<tv2+0/220>
ebp;c028df40<init_task_union+1f40/2000>
esp;c028df14<init_task_union+1f14/2000>Trace;
c0115898<bh_action+1c/4c>
Trace;c01157c9<tasklet_hi_action+49/70>
Trace;c01155ab<do_softirq+4b/a0>
Trace;c0108072<do_IRQ+96/a8>
Trace;c0105260<default_idle+0/30>
Trace;c0105260<default_idle+0/30>
Trace;c010a228<call_do_IRQ+5/d>
Trace;c0105260<default_idle+0/30>
Trace;c0105260<default_idle+0/30>
Trace;c0105286<default_idle+26/30>
Trace;c01052f9<cpu_idle+41/54>
Trace;c0105000<_stext+0/0>
Trace;c010502a<rest_init+2a/30>Code;
c0118743<timer_bh+1b7/35c>
00000000 <_EIP>:
Code;c0118743<timer_bh+1b7/35c> <=====
0: 8b 02 mov (%edx),%eax <=====
Code;c0118745<timer_bh+1b9/35c>
2: 89 48 04 mov %ecx,0x4(%eax)
Code;c0118748<timer_bh+1bc/35c>
5: 89 01 mov %eax,(%ecx)
Code;c011874a<timer_bh+1be/35c>
7: 89 51 04 mov %edx,0x4(%ecx)
Code;c011874d<timer_bh+1c1/35c>
a: 89 0a mov %ecx,(%edx)
Code;c011874f<timer_bh+1c3/35c>
c: 89 f1 mov %esi,%ecx
Code;c0118751<timer_bh+1c5/35c>
e: 39 d9 cmp %ebx,%ecx
Code;c0118753<timer_bh+1c7/35c>
10: 0f 85 37 ff 00 00 jne ff4d <_EIP+0xff4d>c0128690<swap_entry
_free+18/3c><0>Kernel panic: Aiee, killing interrupt handler!
Signature · 3 lines
Hasso Tepper Elion Enterprises Ltd. WAN administrator
I'm having similar problems, and wonder:
1) Is the box also serving as a firewall (iptables)?
2) Are you using Intel E100 nics?
Phil Oester
Quoted 11 lines · Hasso Tepper
Quoted 7 lines · Hasso Tepper
It's almost 100% (sometimes it just hangs) reproducable for me although in somewhat strange situation. I have to run Quagga/Zebra routing suite with zebra and ospfd daemons running. Networking restart script (removing 60 vlans, creating them again and assigning IPs to them) leads to panic. Process isn't always swapper, I have seen ip and kupdated as well, but trace is always same. I can't reproduce it with 2.4.20 kernel.
It's introduced with 2.4.25-rc1 (2.4.25-pre8 is OK). And it's still there in 2.4.26-rc1.
If you are using E100's, can you backout (patch -R) this patch from 2.4.25 vanilla:
http://linux.bkbits.net:8080/linux-2.4/gnupatch@401f2442_DogKaCRsaoMURrjvGCz4w
if using E1000's, can you backout this patch:
http://linux.bkbits.net:8080/linux-2.4/gnupatch@402212c1G2hqO92c1xCHTWJ4AFBFPQ
And see if this stops the panics?
Phil Oester
Quoted 12 lines · Hasso Tepper
Quoted 11 lines
Quoted 7 lines · Hasso Tepper
It's almost 100% (sometimes it just hangs) reproducable for me although in somewhat strange situation. I have to run Quagga/Zebra routing suite with zebra and ospfd daemons running. Networking restart script (removing 60 vlans, creating them again and assigning IPs to them) leads to panic. Process isn't always swapper, I have seen ip and kupdated as well, but trace is always same. I can't reproduce it with 2.4.20 kernel.
It's introduced with 2.4.25-rc1 (2.4.25-pre8 is OK). And it's still there in 2.4.26-rc1.
Quoted 7 lines · Phil Oester
If you are using E100's, can you backout (patch -R) this patch from 2.4.25 vanilla:
http://linux.bkbits.net:8080/linux-2.4/gnupatch@401f2442_DogKaCRsao
MURrjvGCz4wif using E1000's, can you backout this patch:
Yes.
Quoted 2 lines
http://linux.bkbits.net:8080/linux-2.4/gnupatch@402212c1G2hqO92c1xC
HTWJ4AFBFPQ
But this patch isn't in 2.4.25-rc1 I have already problem with.
Quoted 1 line
And see if this stops the panics?
Now when linux.bkbits.net is working again, I walked through patches between 2.4.25-pre8 and 2.4.25-rc1 and reverted this patch -
http://linux.bkbits.net:8080/linux-2.4/cset%
401.1290.17.1?nav=index.html|ChangeSet@-9M
This solved problem for me, seems (tested only with 2.4.25-rc1 for now). I had feeling that it's related to multicast from the beginning because I couldn't reproduce panic when I hadn't ospfd daemon running (ospf uses multicast).
Quoted 16 lines
Phil Oester
Quoted 13 lines · Hasso Tepper
Quoted 12 lines
Quoted 8 lines · Hasso Tepper
It's almost 100% (sometimes it just hangs) reproducable for me although in somewhat strange situation. I have to run Quagga/Zebra routing suite with zebra and ospfd daemons running. Networking restart script (removing 60 vlans, creating them again and assigning IPs to them) leads to panic. Process isn't always swapper, I have seen ip and kupdated as well, but trace is always same. I can't reproduce it with 2.4.20 kernel.
It's introduced with 2.4.25-rc1 (2.4.25-pre8 is OK). And it's still there in 2.4.26-rc1.
Signature · 3 lines
Hasso Tepper Elion Enterprises Ltd. WAN administrator
Do you have CONFIG_IP_MULTICAST enabled in your .config? I don't, and a couple of the changes in this changeset depend upon it.
I also run ospfd, so maybe you've hit upon something here...cc'ing linux-net for comment
Phil
p.s. here's a bookmarkable link to that changeset:
Quoted 9 lines · Hasso Tepper
Now when linux.bkbits.net is working again, I walked through patches between 2.4.25-pre8 and 2.4.25-rc1 and reverted this patch -
http://linux.bkbits.net:8080/linux-2.4/cset%
401.1290.17.1?nav=index.html|ChangeSet@-9MThis solved problem for me, seems (tested only with 2.4.25-rc1 for now). I had feeling that it's related to multicast from the beginning because I couldn't reproduce panic when I hadn't ospfd daemon running (ospf uses multicast).
Quoted 1 line · Phil Oester
Do you have
CONFIG_IP_MULTICASTenabled in your .config?
Yes.
Quoted 5 lines
I don't, and a couple of the changes in this changeset depend upon it.
I also run ospfd, so maybe you've hit upon something here...cc'ing linux-net for comment
Signature · 3 lines
Hasso Tepper Elion Enterprises Ltd. WAN administrator
IIRC a similar problem was in v2.6.
I'll dig it up.
Quoted 10 lines · Hasso Tepper
Quoted 1 line · Phil Oester
Do you have
CONFIG_IP_MULTICASTenabled in your .config?Yes.
Quoted 5 lines
I don't, and a couple of the changes in this changeset depend upon it.
I also run ospfd, so maybe you've hit upon something here...cc'ing linux-net for comment