Badness in remove_proc_entry
I'm not sure if this is alsa's fault. It happens when I unload the module. Yup, snd_gina24 is the driver I'm developing, but it also happens with snd-powermac and when I try to load a module for a card I don't have.
Linux Jay 2.6.5-rc2-ben0 #1 SMP Sat Mar 27 09:10:55 CET 2004 ppc unknown
Badness in remove_proc_entry at fs/proc/generic.c:660
Call trace: [c000bbe4] dump_stack+0x18/0x28 [c00089f4] check_bug_trap+0x84/0xac [c0008b4c] ProgramCheckException+0x130/0x170 [c00080b4] ret_from_except_full+0x0/0x4c [c00973a4] remove_proc_entry+0x100/0x154 [e668c64c] snd_remove_proc_entry+0x24/0x34 [snd] [e668df28] snd_info_unregister+0xb0/0x128 [snd] [e668d668] snd_info_card_free+0x74/0xa4 [snd] [e668afd8] snd_card_free+0xf8/0x2a0 [snd] [e671d63c] snd_Echo_remove+0x80/0x84 [snd_gina24] [c00ec21c] pci_device_remove+0x60/0x64 [c012ab80] device_release_driver+0x84/0x88 [c012abb0] driver_detach+0x2c/0x50 [c012aee0] bus_remove_driver+0x54/0xb8 [c012b2dc] driver_unregister+0x18/0x88
--
Giuliano.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
Quoted 4 lines · Giuliano Pochini
I'm not sure if this is alsa's fault. It happens when I unload the module. Yup,
snd_gina24is the driver I'm developing, but it also happens with snd-powermac and when I try to load a module for a card I don't have.
It's fixed in 1.0.4rc1.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
Quoted 7 lines · On Sun, 28 Mar 2004 09:54:46 +0200 (CEST) Jaroslav Kysela <[email protected]> wrote:
Quoted 3 lines · Giuliano Pochini
I'm not sure if this is alsa's fault. It happens when I unload the module. Yup,
snd_gina24is the driver I'm developing, but it also happens with snd-powermac and when I try to load a module for a card I don't have.It's fixed in 1.0.4rc1.
I ported my driver to 1.0.4rc2. There is no "badness" in the message anymore :) but it still comes up. Now it only happens if I try two modules I'm developing. Example:
modprobe snd-layla24
No errors, but I don't have that card. lsmod shows the module is loaded.
modprobe snd-gina24 (my card) --> dmesg:
kobject_register failed for Echoaudio (-17)
Call trace: [c000bbe4] dump_stack+0x18/0x28 [c00dfb24] kobject_register+0x68/0x6c [c012adec] bus_add_driver+0x50/0xf0 [c012b2b4] driver_register+0x38/0x48 [c00ec408] pci_register_driver+0x50/0x6c [e66669b0] alsa_card_Echo_init+0x1c/0x774 [snd_gina24] [c003de50] sys_init_module+0x200/0x3e0 [c0007b1c] ret_from_syscall+0x0/0x44
Echoaudio soundcard not found or device busy
If I load snd-gina24 and then snd-layla24, it complains when I load the latted, even if snd-gina24 is loaded and running fine. It does not happen if the first module I load is something else (eg. hdsp). Maybe there is something I'm not aware of... I already tried to use different MODULE_DESCRIPTION and MODULE_DEVICES without success.
--
Giuliano.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click