Skip to contentSkip to conversation

Continous buzzing sound in kde

DISCUSSION Peter H. 2 participants 4 messages Mar 28, 2004 – Mar 29, 2004

lore
Share & tools
lore

Peter H.

author
#0 lore raw

Hi,

In slackware 9.1 where I had to change from alsa to OSS sound system due to distorted sounds with alsa I still can not open kde desktop.

Trying to do so I get a continuous, annoying buzz, necessitating a quick ctrl-alt-backspace retreat.

This shows on the console:

AudioIO::close(): entering AudioIOOSSThreaded::stopThread() entering
waiting for writerThread to finish AudioIOOSSTHreaded::writerThread() fatal error writing to a audio_fd AudioIOOSSThreaded::writerThread() thread stopped AudioIOOSSTHreaded::readerThread() fatal error reading from audio_fd AudioIOOSSThreaded::readerThread() thread stopped
waiting for readerThread to finish AudioIOOSSThreaded::stopThread(): leaving AudioIO::close(): leaving

Any suggestions to stop this buzzing sound?

There is no sound problem anymore with gnome or fvwm2.

lsmod gives:

Module                  Size  Used by    Not tainted
bsd_comp                4312   0 (autoclean)
ppp_async               7552   0 (autoclean)
ppp_generic            15452   0 (autoclean) [bsd_comp ppp_async]
slhc                    5040   0 (autoclean) [ppp_generic]
pcmcia_core            40032   0
ide-scsi                9424   0
via82cxxx_audio        19704   0
ac97_codec             12296   0 [via82cxxx_audio]
soundcore               3332   2 [via82cxxx_audio]
agpgart                39576   0 (unused)

Chipset: P4M266/A Northbridge and VT8235 Southbridge

AC'97 Audio Codec: Compliant with AC'97 2.1 specs.
16-bit stereo full-duplex CODEC with fixed 48KHz sampling
rate.
Sound Blaster, Sound Blaster Pro Compatible

Regards

Signature · 9 lines
Peter



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#1 lore raw
Quoted 4 lines · Peter H.

Hi,

In slackware 9.1 where I had to change from alsa to OSS sound system due to distorted sounds with alsa I still can not open kde desktop.

Having one of these chipsets i sympathise with you, however i dont have your problem.

Quoted 2 lines

Trying to do so I get a continuous, annoying buzz, necessitating a quick ctrl-alt-backspace retreat.

So it seems the problem arises when kde is starting, this would point to the file (default sound file) KDE_Startup.wav found in /opt/kde/share/sounds/

The funtion audio_fd is another word for /dev/dsp (at least it is normally), I would simply move or rename KDE_Startup.wav and see what happens.

The buzzing sound would possably interpret a missed interrupt or some interrupt sharing problem, if you use google.com/linux you may well see that others have reported simalar problems at some time or other.

Of course it could well be that the .wav may be corrupted in some way and kicks the problem off.

You could once again use strace to catch the problem, however be prepared if you do for one hell of a big strace file.

Quoted 41 lines

This shows on the console:

AudioIO::close(): entering AudioIOOSSThreaded::stopThread() entering
waiting for writerThread to finish AudioIOOSSTHreaded::writerThread() fatal error writing to a audio_fd AudioIOOSSThreaded::writerThread() thread stopped AudioIOOSSTHreaded::readerThread() fatal error reading from audio_fd AudioIOOSSThreaded::readerThread() thread stopped
waiting for readerThread to finish AudioIOOSSThreaded::stopThread(): leaving AudioIO::close(): leaving

Any suggestions to stop this buzzing sound?

There is no sound problem anymore with gnome or fvwm2.

lsmod gives:

Module                  Size  Used by    Not tainted
bsd_comp                4312   0 (autoclean)
ppp_async               7552   0 (autoclean)
ppp_generic            15452   0 (autoclean) [bsd_comp ppp_async]
slhc                    5040   0 (autoclean) [ppp_generic]
pcmcia_core            40032   0
ide-scsi                9424   0
via82cxxx_audio        19704   0
ac97_codec             12296   0 [via82cxxx_audio]
soundcore               3332   2 [via82cxxx_audio]
agpgart                39576   0 (unused)

Chipset: P4M266/A Northbridge and VT8235 Southbridge

AC'97 Audio Codec: Compliant with AC'97 2.1 specs.
16-bit stereo full-duplex CODEC with fixed 48KHz
sampling rate.
Sound Blaster, Sound Blaster Pro Compatible

Regards

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
author
#2 lore raw

Thanks Richard!

I solved the problem!!!

In the control center sound system in Sound I/O disable "Enable full duplex operation".

Regards

Signature · 7 lines
Peter

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#3 lore raw
Quoted 6 lines · Peter

Thanks Richard!

I solved the problem!!!

In the control center sound system in Sound I/O disable "Enable full duplex operation".

In the trace you sent me i found;

ioctl(3, SNDCTL_TMR_TIMEBASE, 0xbffff640) = -1 ENOTTY (Inappropriate ioctl for device)

Yes, i was about to write to you, the above is what i think is/was the problem, however it should not cause a buzzing sound, anyway glad it now works.

Quoted 1 line

Regards

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs