Skip to contentSkip to conversation

Reinstallation

DISCUSSION S. Barret Dolph 3 participants 11 messages Mar 30, 2004 – Apr 1, 2004 2 messages not in the archive

lore
Share & tools
lore
#0 lore raw

I tried installing Source Mage with custom kernels. I don't have the time to figure this out now and would like to remove everything and start over with Mandrake. (Whose evils I know how to cure.) What is the easiest way to do this. I have absolutely no data on the hard drive.

Cordially,
S. Barret Dolph
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 4 lines · S. Barret Dolph

I tried installing Source Mage with custom kernels. I don't have the time to figure this out now and would like to remove everything and start over with Mandrake. (Whose evils I know how to cure.) What is the easiest way to do this. I have absolutely no data on the hard drive.

Simply tell mandrake to use all the disk or the use the partitions which are in use with the old install.

Quoted 2 lines

Cordially,
S. Barret Dolph

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

A more detailed approach.

I made a mess of installing a custom kernal. (2.4x). I tried again with a new kernel. 2.64. This didn't work so I decided to start again as there was little installed. I downloaded the newest source mage (with the 2.63 kernetl), deleted all partitions, reformatted the partitions, transfered the basic install. But when I got to the splash screen I was given the list of 2.4x or 2.64. I would have guessed that fdisk would have erased all that. I still have problems with my cd as I can't even load Knoppix.

I would have guessed that reformatting the disk would wipe everything out but it seems not to be the case.

Quoted 11 lines · On Tuesday March 30 2004 17:44, pa3gcu wrote:
Quoted 3 lines · S. Barret Dolph

That doesn't work. The partitioning works but after that I nothing gets installed. Is there a way to remove the prior distribution before reinstalling?

Then you are doing it wrong as you have the choose of formating the partitions via disk druid, its as easy as that.

If you want to you can delete the old stuff easily, simply start your old distro and use fdisk to delete the partitions.
I can assure you there is no need to do that at all.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#5 lore raw
Quoted 2 lines · S. Barret Dolph

I would have guessed that reformatting the disk would wipe everything out but it seems not to be the case.

That is your MBR not your disk partitions working, your disk MBR is the first 512 bytes and is NOt a partition as such.

If you boot from a CDrom or floppy then you will have no problems with your disks MBR (Master Boot Record) as it will be ignored.

Mandrake cdroms are bootable, you will possably need to set your BIOS to boot from CDrom, is that your problem, you seem to be getting things all mixed up.

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#6 lore raw

I have no problems booting the Mandrake disk. It goes fine up with changing partitions, mounting partitions, but after I have selected the software it takes a very long time to say problems installing every single package.

Quoted 7 lines · you
Quoted 2 lines · S. Barret Dolph

I would have guessed that reformatting the disk would wipe everything out but it seems not to be the case.

That is your MBR not your disk partitions working, your disk MBR is the first 512 bytes and is NOt a partition as such.

Quoted 6 lines

If you boot from a CDrom or floppy then you will have no problems with your disks MBR (Master Boot Record) as it will be ignored.

Mandrake cdroms are bootable, you will possably need to set your BIOS to boot from CDrom, is that your problem, you seem to be getting things all mixed up.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#7 lore raw
Quoted 3 lines · S. Barret Dolph

I have no problems booting the Mandrake disk. It goes fine up with changing partitions, mounting partitions, but after I have selected the software it takes a very long time to say problems installing every single package.

Just what do you mean.???

What do you do in terms of commands, do you format the partitions, ? etc etc.???

Help us to help you, we cannot see what happens on your screen, you have to tell us letter for letter.

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#8 lore raw

I redid the partitions and then formatted them with Reiserfs. I then selected the packages to be installed. None of the packages could be installed. After waiting quite a while I got messages saying, for example, xxx program had problems do you want to continue. There was a message for every package apparently.

Quoted 8 lines

Just what do you mean.???

What do you do in terms of commands, do you format the partitions, ? etc etc.???

Help us to help you, we cannot see what happens on your screen, you have to tell us letter for letter.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#9 lore raw
Quoted 5 lines · S. Barret Dolph

I redid the partitions and then formatted them with Reiserfs. I then selected the packages to be installed. None of the packages could be installed. After waiting quite a while I got messages saying, for example, xxx program had problems do you want to continue. There was a message for every package apparently.

Sorry to jump into this late, but I'm about as confused as Richard is (and since I live 8 time zones west of Richard, perhaps it's time for me to pop in so he can go to dinner).

"xxx program had problems do you want to continue" is not an example. It is a paraphrase, and rather an uninformative one. Does the message really say nothing more informative than "had problems"? Does it really call each a "program", not a "package"? I doubt it ... I recall Knoppix as a Debian derivative, and the Debian style of messages is very different from what you are reporting ... but the best way to tell is to see an actual, complete example.

I haven't installed Knoppix here, so I'm fishing a bit to think of what might be causing problems.

Does the install kernel support Reiserfs out of the box? Might the root (/) partition need to be ext2 or ext3, for example? Or might you need to load a kernel module before doing package installation?

Technically, Linux users do not "format" partitions ... we create partitions with fdisk (or a relative) and put filesystems on them with mke2fs (or the one appropriate for your filesystem type). Did you do both steps?

Please describe the steps you are taking a bit more exactly, provide actual examples of error messages, and give us the structure of the system (such as the output of "df" and "uname -a" and "ls -l /" ... at this point, the description is so vague that I'm not really sure what else to ask for).

PS - Kernels have names like 2.6.4 and 2.4.x, not 2.64 and 2.4x.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#10 lore raw

The message reads, from a Mandrake installation, ....There was an error installing packages XXX. Do you wish to continue. This goes through every package I selected.

File partitions. I used fdisk to partition and then put Reseirfs on them.

Then I let Mandrake do the partitioning automatically.

The result was the same.

Quoted 32 lines

"xxx program had problems do you want to continue" is not an example. It is a paraphrase, and rather an uninformative one. Does the message really say nothing more informative than "had problems"? Does it really call each a "program", not a "package"? I doubt it ... I recall Knoppix as a Debian derivative, and the Debian style of messages is very different from what you are reporting ... but the best way to tell is to see an actual, complete example.

I haven't installed Knoppix here, so I'm fishing a bit to think of what might be causing problems.

Does the install kernel support Reiserfs out of the box? Might the root (/) partition need to be ext2 or ext3, for example? Or might you need to load a kernel module before doing package installation?

Technically, Linux users do not "format" partitions ... we create partitions with fdisk (or a relative) and put filesystems on them with mke2fs (or the one appropriate for your filesystem type). Did you do both steps?

Please describe the steps you are taking a bit more exactly, provide actual examples of error messages, and give us the structure of the system (such as the output of "df" and "uname -a" and "ls -l /" ... at this point, the description is so vague that I'm not really sure what else to ask for).

PS - Kernels have names like 2.6.4 and 2.4.x, not 2.64 and 2.4x.

Quoted 5 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#11 lore raw
Quoted 9 lines · S. Barret Dolph

The message reads, from a Mandrake installation, ....There was an error installing packages XXX. Do you wish to continue. This goes through every package I selected.

File partitions. I used fdisk to partition and then put Reseirfs on them.

Then I let Mandrake do  the partitioning automatically.

The result was the same.

If you used fdisk as you say and oyu created a reiserfs filesystem, then its madness to let Mandrake do it again.

The error message you are getting can be caused by two things.

1) No mount point defined in the partitions section of the install.
2) You source medium is corrupt, use MD5 to check it.

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#12 lore raw
In reply to S. Barret Dolph
Quoted 14 lines · S. Barret Dolph

I redid the partitions and then formatted them with Reiserfs. I then selected the packages to be installed. None of the packages could be installed. After waiting quite a while I got messages saying, for example, xxx program had problems do you want to continue. There was a message for every package apparently.

Quoted 7 lines

Just what do you mean.???

What do you do in terms of commands, do you format the partitions, ? etc etc.???

Help us to help you, we cannot see what happens on your screen, you have to tell us letter for letter.

Thats not very informative is it, like i said if you want help then we need the error messages letter for letter.

Firstly i suggest you go to;

http://www.mandrakelinux.com/en/hardware.php3
Make sure your hardware is compatable.
Then
http://www.mandrakelinux.com/en/fdoc.php3
Look for an install document.
Or read it from the source CD.
If you have followed the documentation to the "Tee" and things still go wrong then write and tell us what goes wrong where it goes wrong and the "exacht" error messages.

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs