debugging kswapd oops 2.4.26-pre6
Greetings,
I am trying to debug a reproducable oops in kmem_cache_reap. Kernel is patched with 64 bit jiffies patch with 500HZ ticks.
System is nforce2 Albatron KM18G pro with bt878 tv card and matrox meteorII mc rgb capture cards and some other in house code modules to tie together gps compass etc with images.
Earlier postings
http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-02/7341.html
Oh yeah - have run memtest86 overnight OK and can reproduce Oops on another KM18G Pro machine with different memory, capture cards and cpu. I forcibly power off machine, on reboot it fscks the storage drive, runs the imaging progs and bang Oops shortly after memfree hits low watermark.
I am new to kernel debugging but have picked up on a code difference as follows and am unsure what to make of it.
Here is my most common Oops report.
ksymoops 2.4.8 on i686 2.4.26-rd3. Options used
-V (default)
-k /proc/ksyms (default)
-L (specified)
-o /lib/modules/2.4.26-rd3/ (default)
-m /boot/System.map (specified)
Unable to handle kernel paging request at virtual address 7e857f92 c0132357 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c0132357>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010897
eax: 7e857f82 ebx: 000009df ecx: c121e1d8 edx: 00000000
esi: 00000002 edi: 00000000 ebp: 00000000 esp: c13f5f38
ds: 0018 es: 0018 ss: 0018
Process kswapd (pid: 4, stackpage=c13f5000)
Stack: c110b0c0 000001d0 00000000 c121e1c8 00000000 00000000 00000020 000001d0
c031c5f8 c031c5f8 c013362c c13f5f84 000001d0 0000003c 00000020 c01336c3
c13f5f84 c13f4000 00000000 00000000 c031c5f8 c13f4000 c031c520 00000000
Call Trace: [<c013362c>] [<c01336c3>] [<c013386e>] [<c01338c9>] [<c01339ed>]
[<c0133960>] [<c0105000>] [<c010578b>] [<c0133960>]
Code: 8b 50 10 85 d2 74 08 0f 0b ff 06 1c f1 2c c0 8b 00 43 39 c8Quoted 4 lines
Quoted 4 lines
EIP;
c0132357<kmem_cache_reap+77/1f0> <=====ecx;
c121e1d8<_end+e6462c/1e4e84d4>
esp;c13f5f38<_end+103c38c/1e4e84d4>
Trace; c013362c <shrink_caches+1c/60>
Trace; c01336c3 <try_to_free_pages_zone+53/e0>
Trace; c013386e <kswapd_balance_pgdat+5e/a0>
Trace; c01338c9 <kswapd_balance+19/30>
Trace; c01339ed <kswapd+8d/b0>
Trace; c0133960 <kswapd+0/b0>
Trace; c0105000 <_stext+0/0>
Trace; c010578b <arch_kernel_thread+2b/40>
Trace; c0133960 <kswapd+0/b0>
Code; c0132357 <kmem_cache_reap+77/1f0>
00000000 <_EIP>:(gdb) disassemble kmem_cache_reap
Code; c0132357 <kmem_cache_reap+77/1f0> <=====
0: 8b 50 10 mov 0x10(%eax),%edx <=====
Code; c013235a <kmem_cache_reap+7a/1f0>
3: 85 d2 test %edx,%edx
Code; c013235c <kmem_cache_reap+7c/1f0>
5: 74 08 je f <_EIP+0xf>
Code; c013235e <kmem_cache_reap+7e/1f0>
7: 0f 0b ud2a
Code; c0132360 <kmem_cache_reap+80/1f0>
9: ff 06 incl (%esi)
Code; c0132362 <kmem_cache_reap+82/1f0>
b: 1c f1 sbb $0xf1,%al
Code; c0132364 <kmem_cache_reap+84/1f0>
d: 2c c0 sub $0xc0,%al
Code; c0132366 <kmem_cache_reap+86/1f0>
f: 8b 00 mov (%eax),%eax
Code; c0132368 <kmem_cache_reap+88/1f0>
11: 43 inc %ebx
Code; c0132369 <kmem_cache_reap+89/1f0>
12: 39 c8 cmp %ecx,%eax
Here is relevant code from same running kernel on epox 8rga+ machine matches above (no capture cards and no custom kern modules).
gdb vmlinux /proc/kcore
(gdb) disassemble kmem_cache_reap
0xc0132357 <kmem_cache_reap+119>: mov 0x10(%eax),%edx 0xc013235a <kmem_cache_reap+122>: test %edx,%edx 0xc013235c <kmem_cache_reap+124>: je 0xc0132366 <kmem_cache_reap+134> 0xc013235e <kmem_cache_reap+126>: ud2a 0xc0132360 <kmem_cache_reap+128>: incl (%esi) 0xc0132362 <kmem_cache_reap+130>: sbb $0xf1,%al 0xc0132364 <kmem_cache_reap+132>: sub $0xc0,%al 0xc0132366 <kmem_cache_reap+134>: mov (%eax),%eax 0xc0132368 <kmem_cache_reap+136>: inc %ebx 0xc0132369 <kmem_cache_reap+137>: cmp %ecx,%eax
Here is result of objdump of slab.o in kernel source tree.
d97: 8b 50 10 mov 0x10(%eax),%edx
d9a: 85 d2 test %edx,%edx
d9c: 74 08 je da6 <kmem_cache_reap+0x86>
d9e: 0f 0b ud2a
da0: ff 06 incl (%esi)
da2: 00 00 add %al,(%eax)
da4: 00 00 add %al,(%eax)
da6: 8b 00 mov (%eax),%eax
da8: 43 inc %ebx
da9: 39 c8 cmp %ecx,%eaxI note the differences? Oops and running kernel have sbb and sub, slab.o does not and has add add instead?
Is this expected? perhaps some normal fixup on relocation?
Regards
Ross Dickson