htb2 -> htb3 problems
Hello!
I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation.
So, I've moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit.
What can be wrong? The only change I see is htb2 -> htb3
Here is my qdiscs/classes/filters example
qdisc htb 1: dev eth0 r2q 10 default 2500 direct_packets_stat 4604 ver 3.13 qdisc sfq 100: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec qdisc sfq 3300: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec qdisc sfq 3301: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec qdisc sfq 3302: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec qdisc sfq 3304: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec qdisc sfq 3305: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec qdisc sfq 3306: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec qdisc sfq 3308: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 5sec [skip]
class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
class htb 1:3300 parent 1:1 leaf 3300: prio 0 quantum 13107 rate 1Mbit ceil 1126Kbit burst 1023b/8 mpu 0b cburst 0b/8 mpu 0b level 0 class htb 1:3301 parent 1:1 leaf 3301: prio 0 quantum 10240 rate 800Kbit ceil 1Mbit burst 1023b/8 mpu 0b cburst 0b/8 mpu 0b level 0 class htb 1:3302 parent 1:1 leaf 3302: prio 0 quantum 13107 rate 1Mbit ceil 1200Kbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0 class htb 1:3304 parent 1:1 leaf 3304: prio 0 quantum 4915 rate 384Kbit ceil 384Kbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0 [skip]
filter parent 1: protocol ip pref 50 fw
filter parent 1: protocol ip pref 50 fw handle 0x14b4 classid 1:5300 filter parent 1: protocol ip pref 50 fw handle 0x14b5 classid 1:5301 filter parent 1: protocol ip pref 50 fw handle 0x14b6 classid 1:5302 filter parent 1: protocol ip pref 50 fw handle 0x14b8 classid 1:5304 filter parent 1: protocol ip pref 50 fw handle 0x14b9 classid 1:5305 filter parent 1: protocol ip pref 50 fw handle 0x14ba classid 1:5306 [skip]
Signature · 4 lines
Michael Vasilenko _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows
htb_dequeue_prioat 1st place with 3x isolation.So, I've moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit.
What can be wrong? The only change I see is htb2 -> htb3
Hello,
I suppose the drop you see is CPU bound ? Did you profiled it again ?
Both HTB algorithms are very different so that one can expect different behavior with different data/rules. But I can admit that this 5x drop is rather big and unfortunate.
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · devik
Quoted 7 lines
I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows
htb_dequeue_prioat 1st place with 3x isolation.So, I've moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit.
Quoted 6 lines
Quoted 1 line
What can be wrong? The only change I see is htb2 -> htb3
Hello,
I suppose the drop you see is CPU bound ? Did you profiled it again ?
No, CPU is about times more in idle state in htb3, and
5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the reason of moving to htb3.
Quoted 3 lines
Both HTB algorithms are very different so that one can expect different behavior with different data/rules. But I can admit that this 5x drop is rather big and unfortunate.
any ideas?
Signature · 4 lines
Michael Vasilenko _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines
Quoted 2 lines
I suppose the drop you see is CPU bound ? Did you profiled it again ?
No, CPU is about times more in idle state in htb3, and
5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the reason of moving to htb3.
ok then it is config issue probably. you should pin it down to smallest possible number of classes for test (say up to 5 classes) and then use tc -s show class ... to see internal statistics. Look for classes with small (or negative) tokens or ctokens - these are in throttling state and are slowing throughtput - then think if it is ok ..
From data you send one can't decide what's bad. In any case and as I said before, behavioue changed a bit so that results can be a bit different a may need tc script changes.
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · devik
Quoted 6 lines
Quoted 2 lines
I suppose the drop you see is CPU bound ? Did you profiled it again ?
No, CPU is about times more in idle state in htb3, and
5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the reason of moving to htb3.
Quoted 6 lines
ok then it is config issue probably. you should pin it down to smallest possible number of classes for test (say up to 5 classes) and then use tc -s show class ... to see internal statistics. Look for classes with small (or negative) tokens or ctokens - these are in throttling state and are slowing throughtput - then think if it is ok ..
ok
I'm creating root with 200Mbit
and parent with 10Mbit/1Mbit
class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 131072 rate 10Mbit ceil 12Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 25443954 bytes 17155 pkts (dropped 0, overlimits 0)
rate 143050bps 97pps backlog 25p
lended: 17130 borrowed: 0 giants: 0
tokens: 335 ctokens: -787
class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2723bps 49pps
lended: 0 borrowed: 0 giants: 0
tokens: 8241 ctokens: 8241
class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 25406104 bytes 17130 pkts (dropped 0, overlimits 0)
rate 144147bps 98pps
lended: 0 borrowed: 0 giants: 0
tokens: 8195 ctokens: 8195
class htb 1:3500 parent 1:1 leaf 3500: prio 0 quantum 13107 rate 1Mbit ceil 1Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2739bps 49pps
lended: 8712 borrowed: 0 giants: 0
tokens: 12501 ctokens: -294
so, rate is 1,2Mbit
and what is meaning of negative ctokens?
Quoted 9 lines
Quoted 1 line
From data you send one can't decide what's bad. In any case
and as I said before, behavioue changed a bit so that results can be a bit different a may need tc script changes.
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 4 lines
Michael Vasilenko _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 15 lines · Michael Vasilenko
Quoted 7 lines · devik
Quoted 6 lines
Quoted 2 lines
I suppose the drop you see is CPU bound ? Did you profiled it again ?
No, CPU is about times more in idle state in htb3, and
5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the reason of moving to htb3.Quoted 6 lines
ok then it is config issue probably. you should pin it down to smallest possible number of classes for test (say up to 5 classes) and then use tc -s show class ... to see internal statistics. Look for classes with small (or negative) tokens or ctokens - these are in throttling state and are slowing throughtput - then think if it is ok ..
Quoted 3 lines
ok
I'm creating root with 200Mbit
and parent with 10Mbit/1Mbit
and qdisc stats (I have sfq attached to each leaf htb class):
qdisc sfq 5500: quantum 1514b limit 128p flows 128/1024 perturb 5sec
Sent 52611108 bytes 35988 pkts (dropped 0, overlimits 0) backlog 22p
qdisc sfq 3500: quantum 1514b limit 128p flows 128/1024 perturb 5sec Sent 1004864 bytes 18073 pkts (dropped 0, overlimits 0)
qdisc htb 1: r2q 10 default 2500 direct_packets_stat 130 ver 3.13 Sent 53627322 bytes 54191 pkts (dropped 0, overlimits 89908) backlog 22p
Quoted 40 lines
class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 131072 rate 10Mbit ceil 12Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 25443954 bytes 17155 pkts (dropped 0, overlimits 0)
rate 143050bps 97pps backlog 25p
lended: 17130 borrowed: 0 giants: 0
tokens: 335 ctokens: -787class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2723bps 49pps
lended: 0 borrowed: 0 giants: 0
tokens: 8241 ctokens: 8241class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 25406104 bytes 17130 pkts (dropped 0, overlimits 0)
rate 144147bps 98pps
lended: 0 borrowed: 0 giants: 0
tokens: 8195 ctokens: 8195class htb 1:3500 parent 1:1 leaf 3500: prio 0 quantum 13107 rate 1Mbit ceil 1Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2739bps 49pps
lended: 8712 borrowed: 0 giants: 0
tokens: 12501 ctokens: -294so, rate is 1,2Mbit
and what is meaning of negative ctokens?Quoted 9 lines
Quoted 1 line
From data you send one can't decide what's bad. In any case
and as I said before, behavioue changed a bit so that results can be a bit different a may need tc script changes.
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/Signature · 1 line
Michael Vasilenko
Signature · 4 lines
Michael Vasilenko _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I see you have cburst 0 ! It is not allowed
and is described in docs. What was commands to
create the classes ?
-------------------------------
Martin Devera aka devik
Linux kernel QoS/HTB maintainer
http://luxik.cdi.cz/~devik/
Quoted 52 lines · Michael Vasilenko
Quoted 7 lines · devik
Quoted 6 lines
Quoted 2 lines
I suppose the drop you see is CPU bound ? Did you profiled it again ?
No, CPU is about times more in idle state in htb3, and
5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the reason of moving to htb3.Quoted 6 lines
ok then it is config issue probably. you should pin it down to smallest possible number of classes for test (say up to 5 classes) and then use tc -s show class ... to see internal statistics. Look for classes with small (or negative) tokens or ctokens - these are in throttling state and are slowing throughtput - then think if it is ok ..
ok
I'm creating root with 200Mbit
and parent with 10Mbit/1Mbitclass htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 131072 rate 10Mbit ceil 12Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 25443954 bytes 17155 pkts (dropped 0, overlimits 0)
rate 143050bps 97pps backlog 25p
lended: 17130 borrowed: 0 giants: 0
tokens: 335 ctokens: -787class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2723bps 49pps
lended: 0 borrowed: 0 giants: 0
tokens: 8241 ctokens: 8241class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 25406104 bytes 17130 pkts (dropped 0, overlimits 0)
rate 144147bps 98pps
lended: 0 borrowed: 0 giants: 0
tokens: 8195 ctokens: 8195class htb 1:3500 parent 1:1 leaf 3500: prio 0 quantum 13107 rate 1Mbit ceil 1Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2739bps 49pps
lended: 8712 borrowed: 0 giants: 0
tokens: 12501 ctokens: -294so, rate is 1,2Mbit
and what is meaning of negative ctokens?Quoted 4 lines
Quoted 1 line
From data you send one can't decide what's bad. In any case
and as I said before, behavioue changed a bit so that results can be a bit different a may need tc script changes.
Quoted 10 lines
Quoted 5 lines
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/--
Michael Vasilenko
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · devik
I see you have cburst 0 ! It is not allowed
and is described in docs. What was commands to
create the classes ?
/sbin/tc.3 qdisc add dev eth0 root handle 1:0 htb default 2500 r2q 100/sbin/tc.3 class add dev eth0 parent 1:0 classid 1:1 htb rate 200mbit ceil 200mbit quantum 200000 /sbin/tc.3 class add dev eth0 parent 1:0 classid 1:2 htb rate 200mbit ceil 200mbit quantum 200000 /sbin/tc.3 class add dev eth0 parent 1:1 classid 1:3500 htb rate 10Mbit ceil 10Mbit burst 2048b cburst 1 /sbin/tc.3 qdisc add dev eth0 parent 1:3500 handle 3500: sfq perturb 5/sbin/tc.3 class add dev eth0 parent 1:2 classid 1:5500 htb rate 20Mbit ceil 20Mbit burst 2048b cburst 1 quantum 60000 /sbin/tc.3 qdisc add dev eth0 parent 1:5500 handle 5500: sfq perturb 5/sbin/tc.3 filter add dev eth0 parent 1:0 protocol ip prio 50 handle 3500 fw classid 1:3500 /sbin/tc.3 filter add dev eth0 parent 1:0 protocol ip prio 50 handle 5500 fw classid 1:5500
tc.3 -V
tc utility, iproute2-ss020116
Quoted 68 lines · Michael Vasilenko
Quoted 53 lines
Quoted 7 lines · devik
Quoted 6 lines
Quoted 2 lines
I suppose the drop you see is CPU bound ? Did you profiled it again ?
No, CPU is about times more in idle state in htb3, and
5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the reason of moving to htb3.Quoted 6 lines
ok then it is config issue probably. you should pin it down to smallest possible number of classes for test (say up to 5 classes) and then use tc -s show class ... to see internal statistics. Look for classes with small (or negative) tokens or ctokens - these are in throttling state and are slowing throughtput - then think if it is ok ..
ok
I'm creating root with 200Mbit
and parent with 10Mbit/1Mbitclass htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 131072 rate 10Mbit ceil 12Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 25443954 bytes 17155 pkts (dropped 0, overlimits 0)
rate 143050bps 97pps backlog 25p
lended: 17130 borrowed: 0 giants: 0
tokens: 335 ctokens: -787class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2723bps 49pps
lended: 0 borrowed: 0 giants: 0
tokens: 8241 ctokens: 8241class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 25406104 bytes 17130 pkts (dropped 0, overlimits 0)
rate 144147bps 98pps
lended: 0 borrowed: 0 giants: 0
tokens: 8195 ctokens: 8195class htb 1:3500 parent 1:1 leaf 3500: prio 0 quantum 13107 rate 1Mbit ceil 1Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2739bps 49pps
lended: 8712 borrowed: 0 giants: 0
tokens: 12501 ctokens: -294so, rate is 1,2Mbit
and what is meaning of negative ctokens?Quoted 4 lines
Quoted 1 line
From data you send one can't decide what's bad. In any case
and as I said before, behavioue changed a bit so that results can be a bit different a may need tc script changes.
Quoted 10 lines
Quoted 5 lines
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/--
Michael Vasilenko_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 4 lines
Michael Vasilenko _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
remove cburst 1
-------------------------------
Martin Devera aka devik
Linux kernel QoS/HTB maintainer
http://luxik.cdi.cz/~devik/
Quoted 86 lines · Michael Vasilenko
Quoted 3 lines · devik
I see you have cburst 0 ! It is not allowed
and is described in docs. What was commands to
create the classes ?
/sbin/tc.3qdisc add dev eth0 root handle 1:0 htb default 2500 r2q 100/sbin/tc.3class add dev eth0 parent 1:0 classid 1:1 htb rate 200mbit ceil 200mbit quantum 200000/sbin/tc.3class add dev eth0 parent 1:0 classid 1:2 htb rate 200mbit ceil 200mbit quantum 200000/sbin/tc.3class add dev eth0 parent 1:1 classid 1:3500 htb rate 10Mbit ceil 10Mbit burst 2048b cburst 1/sbin/tc.3qdisc add dev eth0 parent 1:3500 handle 3500: sfq perturb 5/sbin/tc.3class add dev eth0 parent 1:2 classid 1:5500 htb rate 20Mbit ceil 20Mbit burst 2048b cburst 1 quantum 60000/sbin/tc.3qdisc add dev eth0 parent 1:5500 handle 5500: sfq perturb 5/sbin/tc.3filter add dev eth0 parent 1:0 protocol ip prio 50 handle 3500 fw classid 1:3500/sbin/tc.3filter add dev eth0 parent 1:0 protocol ip prio 50 handle 5500 fw classid 1:5500tc.3 -V
tc utility, iproute2-ss020116Quoted 65 lines · Michael Vasilenko
Quoted 63 lines
Quoted 7 lines · devik
Quoted 6 lines
Quoted 2 lines
I suppose the drop you see is CPU bound ? Did you profiled it again ?
No, CPU is about times more in idle state in htb3, and
5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the reason of moving to htb3.Quoted 6 lines
ok then it is config issue probably. you should pin it down to smallest possible number of classes for test (say up to 5 classes) and then use tc -s show class ... to see internal statistics. Look for classes with small (or negative) tokens or ctokens - these are in throttling state and are slowing throughtput - then think if it is ok ..
ok
I'm creating root with 200Mbit
and parent with 10Mbit/1Mbitclass htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 131072 rate 10Mbit ceil 12Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 25443954 bytes 17155 pkts (dropped 0, overlimits 0)
rate 143050bps 97pps backlog 25p
lended: 17130 borrowed: 0 giants: 0
tokens: 335 ctokens: -787class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2723bps 49pps
lended: 0 borrowed: 0 giants: 0
tokens: 8241 ctokens: 8241class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 25406104 bytes 17130 pkts (dropped 0, overlimits 0)
rate 144147bps 98pps
lended: 0 borrowed: 0 giants: 0
tokens: 8195 ctokens: 8195class htb 1:3500 parent 1:1 leaf 3500: prio 0 quantum 13107 rate 1Mbit ceil 1Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0
Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0)
rate 2739bps 49pps
lended: 8712 borrowed: 0 giants: 0
tokens: 12501 ctokens: -294so, rate is 1,2Mbit
and what is meaning of negative ctokens?Quoted 9 lines
Quoted 1 line
From data you send one can't decide what's bad. In any case
and as I said before, behavioue changed a bit so that results can be a bit different a may need tc script changes.
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/--
Michael Vasilenko
Quoted 8 lines
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/--
Michael Vasilenko
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line · devik
remove cburst 1
thanks!
class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 65536 rate 5Mbit ceil 5Mbit burst 20Kb/8 mpu 0b cburst 8151b/8 mpu 0b level 0
Sent 45107618 bytes 42138 pkts (dropped 0, overlimits 0)
rate 608617bps 548pps backlog 40p
lended: 42098 borrowed: 0 giants: 0
tokens: 3908 ctokens: -11502
class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 369059 bytes 6711 pkts (dropped 0, overlimits 0)
rate 5706bps 104pps
lended: 0 borrowed: 0 giants: 0
tokens: 8241 ctokens: 8241
class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7
Sent 45055458 bytes 42098 pkts (dropped 0, overlimits 0)
rate 613755bps 549pps
lended: 0 borrowed: 0 giants: 0
tokens: 7822 ctokens: 7822
class htb 1:3500 parent 1:1 leaf 3500: prio 0 quantum 131072 rate 10Mbit ceil 10Mbit burst 20Kb/8 mpu 0b cburst 14704b/8 mpu 0b level 0
Sent 369059 bytes 6711 pkts (dropped 0, overlimits 0)
rate 5833bps 106pps
lended: 6711 borrowed: 0 giants: 0
tokens: 12713 ctokens: 9104
but I see only 330Kbytes/sec flow (half of 5Mbit rate)
Signature · 4 lines
Michael Vasilenko _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines
Quoted 1 line
remove cburst 1
thanks!
Quoted 8 lines
class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 65536 rate 5Mbit ceil 5Mbit burst 20Kb/8 mpu 0b cburst 8151b/8 mpu 0b level 0
Sent 45107618 bytes 42138 pkts (dropped 0, overlimits 0) rate 608617bps 548pps backlog 40p
lended: 42098 borrowed: 0 giants: 0
tokens: 3908 ctokens: -11502but I see only 330Kbytes/sec flow (half of 5Mbit rate)
From above I see rate 608617bps = 4.7MBit. Probably it will settle down after some while. I suspect there is problem in your way of measuring the rate. Also you can deliberately increase (c)burst to more than default, say to 20kB - the larger the burst it the more insensitive to CPU load it is ...
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Martin Devera
Quoted 11 lines
Quoted 1 line
remove cburst 1
thanks!
class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 65536 rate 5Mbit ceil 5Mbit burst 20Kb/8 mpu 0b cburst 8151b/8 mpu 0b level 0
Sent 45107618 bytes 42138 pkts (dropped 0, overlimits 0) rate 608617bps 548pps backlog 40p
lended: 42098 borrowed: 0 giants: 0
tokens: 3908 ctokens: -11502
Quoted 7 lines
Quoted 3 lines
but I see only 330Kbytes/sec flow (half of 5Mbit rate)
From above I see rate 608617bps = 4.7MBit. Probably it will settle down
after some while. I suspect there is problem in your way of measuring the rate. Also you can deliberately increase (c)burst to more than default, say to 20kB - the larger the burst it the more insensitive to CPU load it is ...
OK, I removed all manual settings of burst/cburst, and it works just fine. htb3 rocks! 30%/90% CPU Usage on 80Mbit stream with >500 classes on htb3/htb2 (P4 2Ghz, 2.4.25 kernel with APIC, e1000 NIC)
Signature · 4 lines
Michael Vasilenko _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/