Total freeze switching X->fb (matrox)
I have this problem with linux 2.6 (2.4 was ok).
I hope this is the right place to report this, it may be related with "drm" mga module..
The problem is: framebuffer (matroxfb) works fine, X (xfree 4.3 or Xorg 6.7) works fine, but sometimes when i hit "ctrl alt F1" for switching on the console, the system freeze.
It's not only a xfree freeze: no SysRq reboot and no working network (sshd is not responding). hard freeze.
This happen *sometimes* : i switch between X and console many times during the day, the box freeze only 2-3 times a day.
I don't known where to go to find the problem, the only interesting element i have is:
2.4:
kernel: [drm] AGP 0.99 Aperture @ 0xe0000000 64MB
kernel: [drm] Initialized mga 3.0.2 20010321 on minor 0 2.6:
kernel: [drm] Initialized mga 3.1.0 20021029 on minor 0
kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
kernel: agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
may the problem be related with the newer version of the module?
any idea?
my stuffs:
video card: Matrox G400 DH on nvidia nforce2 motherboard
kernel: vanilla 2.6.3+ (nforce2 agp/matrox drm/matroxfb support) X server: Xfree 4.3.0 or Xorg r6.7 using "mga" driver
thanks.
Quoted 7 lines · legion
The problem is: framebuffer (matroxfb) works fine, X (xfree 4.3 or Xorg 6.7) works fine, but sometimes when i hit "ctrl alt F1" for switching on the console, the system freeze.
video card: Matrox G400 DH on nvidia nforce2 motherboard
kernel: vanilla 2.6.3+ (nforce2 agp/matrox drm/matroxfb support) X server: Xfree 4.3.0 or Xorg r6.7 using "mga" driver
It also happens with Matrox G550 on VIA board.
All 2.6.x kernels. XFree86 4.3 and 4.4.
And 1280x1024-16@60 do not work (in fb, X is fine) :-(
Signature · 2 lines
Tomasz Torcz Only gods can safely risk perfection, [email protected] it's a dangerous thing for a man. -- Alia