Skip to contentSkip to conversation

Access of 2 RME Multifaces

DISCUSSION Orm Finnendahl 3 participants 3 messages Apr 12, 2004 – Apr 13, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

hope this is the right list to post: I installed to RME Pci Cards with a Multiface each. Running hdsploader finds and initializes both and hdspmixer can also get used with both cards using the card select buttons for card1 and card2. However after startup of jack, I only see 18 alsa_pcm in and out ports instead of 36.

Can someone point me to some infos regarding where and how to configure that? I guess it has to be done somewhere in alsa, but I might be wrong...

--
Orm

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

#1 lore raw
Quoted 5 lines

hope this is the right list to post: I installed to RME Pci Cards with a Multiface each. Running hdsploader finds and initializes both and hdspmixer can also get used with both cards using the card select buttons for card1 and card2. However after startup of jack, I only see 18 alsa_pcm in and out ports instead of 36.

what ALSA device did you tell JACK to use?

Quoted 3 lines

Can someone point me to some infos regarding where and how to configure that? I guess it has to be done somewhere in alsa, but I might be wrong...

~/.asoundrc

google for "alsa multi"

--p

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

#2 lore raw
In reply to Orm Finnendahl
Quoted 8 lines · Orm Finnendahl

Hi,

hope this is the right list to post: I installed to RME Pci Cards with a Multiface each. Running hdsploader finds and initializes both and hdspmixer can also get used with both cards using the card select buttons for card1 and card2. However after startup of jack, I only see 18 alsa_pcm in and out ports instead of 36.

Quoted 6 lines

Can someone point me to some infos regarding where and how to configure that? I guess it has to be done somewhere in alsa, but I might be wrong...

I think Jack can only use one output device? There is a "hack" which should work on pro cards like the rme where you can create a virtual card which binds the two individual cards together. You will need to use the wordclock or otherwise sync the two cards though

See the alsa wiki for details (hint it involves writing a customer asoundrc file)

Ed W

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click